Geely Emgrand X7. Manual part — 672
Geely Emgrand X7. Manual part - 672
13. Install and tighten horizontal pin bolt for
connection of steering wheel and steering pipe
column knuckle.
Torque: 30Nm (Metric) 22 . 2lb-ft(English system)
14. Lower the vehicle.
15. Install left and right front wheels.
16. Add booster steering fluid.
NL12-0073b
2687
12.6.4.5 Rear subframe replacement
Dismantlement Procedure
1. For lifting of the vehicle, see
1.3 Lifting of Vehicle
.
2. For dismantling of rear muffler, refer to
2.7.6.4 Replacement of rear muffler
.
3. Use pallet jack to support rear auxiliary frame.
4. For dismantling of rear vertical arms on both sides, refer to
4.3.7.8 Replacement of rear vertical arm
.
5. For removal of the rear suspension #1 swing arms on both sides, see
4.3.7.3 Replacement of Rear Suspension
Swing Arms.
6. For removal of the rear suspension #2 swing arms on both sides, see
4.3.7.2 Replacement of Rear Suspension
Swing Arms.
7. For dismantlement of top swing arms for both side rear suspensions, see
4.3.7.7 Replacement of Rear
Suspension Top Swing Arms.
8. For dismantlement of the parking brake control mechanism assembly control cable, see
6.5.5.3 Replacement
of Parking Brake Control Mechanism Assembly Control Cable.
NL12-0084b
9. For dismantlement of two rear wheel speed
sensors, see
6.6.7.3 Replacement of Wheel Speed
Sensors (Rear).
10. For dismantling of rear stabilizer rod connecting
rod on both sides, refer to
4.3.7.5 Replacement of
rear stabilizer rod connecting rod
.
11. Dismantle rear stabilizer rod. Refer to
4.3.7.6 rear
stabilizer rod replacement.
12. Dismantle rear damper of both sides refer to
4.3.7.1 rear shock absorber replacement.
13. For dismantling of support of rear axle ball heads
on both sides, refer to
4.3.7.9 Replacement of
support of rear axle ball head
.
14. For dismantling of rear wheel hub unit on both
sides, refer to
4.3.7.10 Replacement of rear wheel
hub unit
.
15. Dismantle fixing bolts on both sides of front
section of rear auxiliary frame.
NL12-0085b
2688
16. Dismantle fixing bolt on both sides of rear end of
rear auxiliary frame.
17. Slowly lower jack and remove rear auxiliary
frame.
NL12-0086b
Installation Procedure:
1. Use flat plate jack to slowly lift rear auxiliary
frame.
2. Install and tighten fixing bolts on both sides of
rear end of rear auxiliary frame.
Torque :200 Nm(Metric)148lb-ft (English system)
NL12-0086b
2689
3. Install and tighten fixing bolt on both sides of
front end of rear auxiliary frame.
Torque: 150 Nm (Metric) 111 lb-ft (English system)
4. Install rear wheel hub units on both sides.
5. Install the spindle head bearing seats for the rear
axles on both sides.
6. Install the two side reaer shock absorbers.
7. Install the rear stabilizer bar.
8. Install the connecting rod between both side rear
stabilizer bars.
9. Install two rear wheel speed sensor .
10. Install parking operation mechanical assembly
cable.
11. Install upper swing arm at both side of rear
suspension.
12. Install swing arm 2 on both sides of rear
suspension.
13. Install swing arm 1 on both sides of rear
suspension.
14. Install rear vertical arm on both sides.
15. Install rear muffler.
16. Lower the vehicle.
17. Install left right rear wheel.
NL12-0085b
2690
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст