Geely Emgrand X7. Manual part — 616
Geely Emgrand X7. Manual part - 616
3. Connect wire harness connector
of rear door lock assembly.
NL11-0304b
4. Fix rear door lock block cable
assembly.
NL11-0305b
5. Paste the retaining membrane.
6. Install the rear door window lifter
switch bracket.
Torque: 5Nm(Metric) 4lb-ft(English
system)
7. Install the rear door internal trim
panel.
8. Connect the battery negative
cable.
NL11-0298b
2463
11.9.7.3 Back door lock assembly replacement
Dismantlement procedure
Warning!
Warning: refer to warning on battery
disconnection in warnings and
precautions.
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
2. For dismantling of back door
trimming plate, refer to 12.9.1.10
Replacement of back door
trimming plate.
3. Disconnect back door lock
assembly harness connector.
NL11-0306b
4. Dismantle back door lock
opening pull rod.
NL11-0307b
5. Detach the control cable of the
external back door handle.
NL11-0308b
2464
6. Remove the fixing bolt for the
back door locking dog.
NL11-0309b
Installation procedure:
1. Install back door lock block
fixing bolt.
Torque :10Nm(Metric) 7lb-ft(English
system)
NL11-0309b
2. Install outer opening handle cable
of back door.
NL11-0308b
2465
3. Install opening pulling rod of
back door lock cylinder
NL11-0307b
4. Connect the harness connector
for the back door lock assembly.
5. Install the back door trim panel.
6. Connect the battery negative
cable.
NL11-0306b
2466
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст