Geely Emgrand X7. Manual part — 442
Geely Emgrand X7. Manual part - 442
8.3.8 Dismantle and installation
8.3.8.1 Power A/C control panel replacement
Dismantle procedure
Warning!
Warning: refer to "warning for battery disconnection" in "warnings and precautions".
1. Disconnect the battery negative cable, refer to
2.11.8.1 battery cable disconnection/connection
procedures.
2. Dismantle central control panel trimming cover.
NL11-0221b
3. Dismantle 4 fixing screws of control panel of
electric A/C.
NL08-0001b
4. Disconnect 5 harnesses connectors of
instrument panel middle switch.
5. Disconnect 3 harness connectors of the electric
A/C control panel.
Notes:
Mark the position of each connector to facilitate correct
installation.
NL08-0002b
1767
6. Remove the fixing screw for the center switch
assembly on the instrument panel .
NL08-0003b
7. Dismantle the central instrument panel switch
assembly from the power A/C control panel.
NL08-0004b
Installation procedure:
1. Install intermediate switch assembly of
instrument panel
NL08-0005b
1768
2. Install fixing screw of instrument panel
intermediate switch assembly and tighten it.
Torque: 3.5Nm (Metric system) 2.6lb-ft (English
system)
NL08-0003b
3. Connect 5 harnesses connectors of instrument
panel middle switch.
4. Connect 3 harness connectors for the electric A/C
control panel.
NL08-0006b
5. Install and tighten 4 fixing screws of the A/C
control panel.
Torque:3 Nm (Metric) 2.2 lb-ft (English system)
NL08-0001b
1769
6. Install the center console trim cover.
7. Connect the battery negative cable.
NL11-0224b
1770
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст