Geely Emgrand X7. Manual part — 394
Geely Emgrand X7. Manual part - 394
6. 5 Parking system
6.5.1 Specifications
6.5.1.1 Fastener specifications
Torque Range
Fastener Name
Model
Metric (NM)
English system(lb-
ft)
Fixing bolt of parking brake control mechanism
assembly switch
M6 8-10 6-7
Fixing bolt of parking brake control mechanism
assembly pulling rod to body
M8×25 16-26 13.3-16.2
Fixing bolt of parking braking cable
M6×14
6-12
4.4-8.9
Fixing bolt of parking brake control level
M8×20
16-26
12-19
6.5.2 Description and operation
6.5.2.1 Description and operation
The parking brake system is a mechanical system, which operates the rear disc brake caliper through a parking
braking pull rod, pulling the parking brake pull rod to start the system; the parking braking pull rod controls the
piston of the rear wheel disc brake caliper through the cable; and when the parking braking pull rod is pulled up
and the ignition switch is on, the parking brake indicator lamp on the combination combination instrument will
turn on.
Pull up the pull rod and press down the button on the pull rod; put down the parking braking pull rod to release the
parking brake; thus, the parking braking indicator lamp in the combination instrument will turn off.
1575
6.5.3 Component position
6.5.3.1 Component position
1
2
3
4
NL06-1005b
1. Parking brake control mechanism
assembly
2 . Front parking brake cable
3. Right rear parkin brake cable with bracket
assembly
4 left rear parking brake cable with
support assembly
1576
6.5.4 Diagnostic information and procedures
6.5.4.1 Fault Symptom Table
Symptoms
Suspected Parts
Measures / referance
1. Parking brake pull rod stroke is too
small
See 6.5.5.4 adjustment of parking brake
control mechanism assembly
2 . Front parking brake cable (struck)
See 6.5.5.3 replacement of parking brake
control mechanism assembly control cable.
3 . Left/ right parking brake cable
(stuck )
See 6.5.5.3 replacement of parking brake
control mechanism assembly control cable.
4. Rear disc brake piece (broken or
distortion)
See 6.2.4.1 check of brake pad in rear brake
system.
Parking braking lag
5 . Rear disc type brake pillar fault
(not return )
See 6.2.4.2 check of brake caliper in rear
brake system.
1. Parking brake pull rod stroke is too
big
See 6.5.5.4 adjustment of parking brake
control mechanism assembly
2 .front parking brake cable(stuck
broken)
See 6.5.5.3 replacement of parking brake
control mechanism assembly control cable.
3. Left /right parking brake cable
(stuck, broken)
See 6.5.5.3 replacement of parking brake
control mechanism assembly control cable.
4. Rear disc brake piece (excessive
abrasion)
See 6.2.4.1 check of brake pad in rear brake
system.
Parking braking failure
5.Rear disc-type brake caliper fault
See 6.2.4.2 check of brake caliper in rear
brake system.
1577
6.5.4.2 Parking brake warning lamp fault
Circuit diagram:
NL06-1006b
1
IP01
2
IP01
9
IP01
1
IP28
B+
IG
IG1
IP+B
HAND BRAKE
15A IF06
10A IF25
驻车制动开关
IPC
IP01
3
6
IP01
SENS GND
GND
Diagnostic Steps:
1
Inspect the parking brake switch.
(a) Disconnect brake switch harness connector IP28.
(b) Inspect whether parking brake switch has reliable grounding connection.
(c) When pulling parking brake rod, inspect switch is closed or not.
2
Inspect the harness (harness connector IP01-IP28).
Repair, regulate or replace the parking brake
switch
Yes
No
Park brake
switch
1578
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст