Geely Emgrand X7. Manual part — 629
Geely Emgrand X7. Manual part - 629
6. Remove the fixing bolt between
the regulator assembly and the
seat bottom.
NL11-0416b
7. Extract the power seat regulator
assembly.
NL11-0417b
Installation procedure:
1. Install electric seat adjuster
assembly.
2. Install fixing bolt of adjuster and
bottom bracket of seat.
Torque: 26Nm (Metric) 19.2 lb-ft
(English system)
NL11-0418b
2515
3. Install left fixing bolt and tighten
it.
Torque: 45 Nm (Metric) 33.3 lb-ft
(English system)
NL11-0419b
4. Install right fixing bolt and
tighten it.
Torque: 45 Nm (Metric) 33 . 3 lb-ft
(English system)
NL11-0420b
5. Connect the harness connector of
the regulator motor.
6. Install the side trim panel.
7. Install the power seat.
NL11-0421b
2516
11.9.8.4 Power seat backrest replacement
Dismantlement procedure
1. For dismantling of electric seat,
refer to 11.9.8.1 Replacement of
front electric seat.
2. For dismantling of seat side
trimming plate, refer to 11.9.8.2
Replacement of seat side
trimming plate.
3. For dismantling of electric seat
adjusting motor assembly, refer
to 11.9.8.3 Replacement of
electric seat adjuster assembly.
4.
Disconnect wire harness
connector of seat backrest.
NL11-0422b
5. Remove the seat back.
NL11-0423b
Installation procedure:
1. Install
seat
backrest.
2. Connect seat backrest wire harnes
connector.
3. Install electric seat adjuster
assembly.
4. Install trimming plate on seat
side.
5. Install the power seat.
NL11-0424b
2517
11.9.8.5 Front seat waist support knob replacement
Dismantlement procedure
1. Unscrew seat waist support
adjusting handle fixing snap ring.
2. Take out waist support adjusting
handle.
NL11-0425b
Installation procedure:
1. Install fixed snap spring of seat
waist support adjusting handle.
NL11-0426b
2. Install seat waist support
adjusting handle
NL11-0427b
2518
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст