Geely Emgrand X7. Manual part — 397

Installation procedure:

1. Install left/ right rear parking brake cable .

2. Install rear parking brake cable fixing bolt and

spring clip.

Torque:9Nm (Metric) 6.6 lb-ft (English system)

NL06-0064b

3. Respectively install left and right rear parking

brake cables onto rear brake caliper.

NL06-0065b

4. Lower the vehicle.

5. Engage the left and right parking brake cable into

the cable balance collar.

NL06-0061b

1587

6. Install parking brake operation mechanical

assembly cable, and press mounting piece to
make it clip parking brake operation mechanical
assembly cable.

NL06-0066b

7. Install the parking brake control mechanism

assembly control cable adjustment nut.

Torque:9 Nm (Metric) 6.7 lb-ft (English system)

NL06-0059b

8. Adjust the parking brake control mechanism

assembly control cable according to the length of
the thread from the top of the control cable to the
hexagon nut which is measured and recorded.

9. If necessary, adjust the parking brake control

mechanism assembly. See 6.5.5.4 Adjustment of
Parking Brake Control Mechanism Assembly.

10. Pull up the parking brake control mechanism

assembly.

11. Install the auxiliary instrument panel.

12 . Connect the battery negative cable.

NL06-0054b

1588

6.5.5.4 parking brake control mechanism assembly adjustment

Adjust process

Warning!

See Warnings For vehicle lifting in Warnings and
precaution.

1. Release parking brake operation mechanism

assembly.

2. For lifting vehicle, refer to 1.3 lifting vehicle.

3.

Inspect whether parking brake operation

mechanical assembly cable can move freely.

NL06-0067b

4. Lower the vehicle.

5. For dismantling of auxiliary instrument panel,

refer to Replacement of auxiliary instrument
panel.

6. Slightly lift the vehicle to enable the wheels to

rotate freely.

7. Tighten the parking brake control mechanism

assembly cable adjustment nut until the wheel
can hardly rotate.

8. Loosen the nut until the rear wheel can freely

rotate.

9. Lower the vehicle.

10. Pull up parking brake. install auxiliary instrument

panel

NL06-0068b

1589

6.6 ABS/TCS/EBD/ESP

6.6.1 Specifications

6.6.1.1 Fastener specifications

Torque Range

Fastener Name

Model

Metric (N.m)

English system

(lb-ft)

Fixed wheel speed sensor bracket nut

M6

8-10

5.9-7.4

Fixed wheel speed sensor support bolt

M6×18

16-20

11.8-14.8

A fixed HECU controller assembly

Six fixed braking hoses

M8×20 15-21

11.1-15.5

6. 6. 1. 2 Speed sensor technique specifications

Wheel speed sensor

Descriptions

Sensor type

Hall-type Speed Sensor

Operating voltage

12±0.1V

Signal Current

Low level: 5.6 - 8.4 mA; high level: 11.2 - 16.8 mA

Clearance value with signal panel

Front axle 1.626 mm (0.06 in) rear axle 0.597 mm (0.02 in)

1590