Geely Emgrand X7. Manual part — 318
Geely Emgrand X7. Manual part - 318
5
Quick self-learning program
A. Keep the vehicle still and engine running and depress the brake pedal to respectively perform 15 N-D shifts
and 5 N-R shifts when the transmission oil temperature is 25 °C, 50 °C and 80 °C. In the shifting process,
move the level from the gear N to the gear D or R to wait for 2 s, and then confirm that the transmission
shifting is completely finished, move the level from the D or R to the gear N, and wait for 2s to complete
self-learning. You can select to perform this shift at any stage of the quick self-learning process;
B. Drive the vehicle and warm up the transmission oil to the normal temperature; (65 °C-90 °C)
C. During the following drive self-learning process, learning must be performed within an oil temperature range
from 65°C to 95°C, otherwise the self-learning conditions will not be met;
D. Drive the vehicle by depressing the accelerator pedal in the steady state (to 20% acceleration opening) to
complete the gradual gear shifting process form 1st speed to 5th speed .Repeat 15 times under this working
condition. If there is still larger impact or the clutch slippage, replace the valve body.
E. Drive the vehicle by depressing the accelerator pedal in the steady state (to a 30% accelerator opening) to
complete the shifting process from 1st speed to 5th speed and repeat 3 times. Repeat this procedure up to 15
times if a great impact or clutch clipping arises. If there is still symptom incurred, replace the valve body.
F. Drive the vehicle by depressing the accelerator pedal in the steady state (to 60% acceleration opening) to
complete the gradual gear shifting process form 1st speed to 5th speed .Repeat 15 times under this working
condition. Replace the valve body if a great impact or clutch slipping still arises;
G. Drive the vehicle by depressing the accelerator pedal in the steady state to100% acceleration opening to
complete the gradual gear shifting process form 1st speed to 3rd speed.Repeat 15 times under this working
condition. Replace the valve body if a great impact or clutch slipping still arises;
H. Perform the following acceleration and descending shifting operations:
z Repeat 5 full degree accelerations from 20 Km/h (you can stop the acceleration when you complete one gear
shift and this is one acceleration).
z Repeat 5 full degree accelerations from 30 Km/h (you can stop the acceleration when you complete one gear
shift and this is one acceleration).
z Repeat 5 full degree accelerations from 40 Km/h (you can stop the acceleration when you complete one gear
shift and this is one acceleration).
z Repeat 5 full degree accelerations from 60 Km/h (you can stop the acceleration when you complete one gear
shift and this is one acceleration).
z Repeat 5 full degree accelerations from 80 Km/h (you can stop the acceleration when you complete one gear
shift and this is one acceleration).
I. Drive the vehicle to 80km/h and make sure the transmission is in 6th speed position. Release the accelerator
pedal and slightly depress the brake pedal to decelerate the vehicle. Downshift the transmission from 6th
speed to 1st speed and repeat this operation 5 times.
1271
J. Perform the following operations for oil supply
interruption and continued fueling to complete
upshift the transmission.
z Accelerate at full to 40 km/h, release the
accelerator pedal in 0.5 s, then rapidly step on 20
% of the accelerator pedal to maintain the speed
at 40 km/h, and repeat 15 times (as shown in the
right figure);
z Accelerate at full to 60 km/h, release the
accelerator pedal in 0.5 s, then rapidly step on
20% of the accelerator pedal to maintain the
speed at 60 km/h, and repeat 15 times (as shown
in the right figure);
z Accelerate at full to 80 km/h, release the
accelerator pedal in 0.5 s, then rapidly step on
20% of the accelerator pedal to maintain the
speed at 80 km/h, and repeat 15 times (as shown
in the right figure);
120
100
80
60
40
20
0
20
40
60
80
100
时间(s)
踏板开度(%)
速度(kpH)
自学习加速踏板和时间关系图
加
速
踏
板
开
度
与
时
间
的
关
系
120
140
160
180
200
(
%
)
NL03-2002c
6 Complete
the
matching
Next
Relational graph of self-learning accelerator
pedal and time
R
ela
tion
of
acc
ele
ra
tio
n pe
dal
op
eni
ng
(
%
) and ti
me
Pedal opening (%)
Speed (kpH)
Time(s)
1272
3.5.7.5 Automatic transmission terminal definition list
自动变速器控制模块线束连接器
J-1
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
SL03-0034c
Terminal No. Normal work current
Terminal descriptions
1
1.1A
Electromagnetic valves SOL 9
2
1.1A
Electromagnetic valves SOL 10
3
1.1A
Electromagnetic valves SOL 7
4
1.1A
Electromagnetic valves SOL 8
5
1.1A
Electromagnetic valves SOL 5
6
1.1A
Electromagnetic valves SOL 6
7
4.7A
Electromagnetic valves SOL RETURN
8 4A
Ground
9
760mA
Electromagnetic valveONOFF SOL 2
10
760mA
Electromagnetic valveONOFF SOL 1
11
760mA
Electromagnetic valveONOFF SOL 4
12
760mA
Electromagnetic valveONOFF SOL 3
13 Empty
Empty
14 Empty
Empty
15
2.28A
Electromagnetic valve ONOFF SOL RETURN
Auto-transmissioncontrol module harness connectorJ-1
1273
16 4A
Power
supply
自动变速器控制模块线束连接器
J-2
1
7
2
8
3
9
4
10
5
11
6
12
SL03-0035c
Terminal No. Normal work current
Terminal descriptions
1 Empty
Empty
2 Empty
Empty
3 Empty
Empty
4 -
Shift
gear
control
5 Empty
Empty
6 Empty
Empty
7 Empty
Empty
8 Empty
Empty
9 Empty
Empty
10
-
Shift gear actives
11 Empty
Empty
12 Empty
Empty
Auto-transmissioncontrol module harness connectorJ-2
1274
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст