Geely Emgrand X7. Manual part — 447
Geely Emgrand X7. Manual part - 447
8.3.8.11 Temperature throttle motor replacement
Dismantle procedure
1. For dismantling of main host of A/C,
refer to
8.3.8.4 Replacement of A/C main host assembly
.
2. Separate evaporator assembly and blower
assembly.
3. Disconnect temperature throttle motor harness
connector.
4. Dismantle 3 fixing screws of temperature vent
motor.
5. Dismantle the temperature damper motor.
NL08-0034b
Installation Procedure:
1. Install temperature valve motor and fixed by
screw
2. Connect temperature vent motor harnesses
connector.
3. Assemble evaporation tank assembly and blower
assembly.
4. Install main host assembly of A/C.
NL08-0035b
1787
8.3.8.12 Heater core assembly replacement
Dismantle procedure
1. For dismantling of main host of A/C, refer to
8.3.8.4 Replacement of A/C main host assembly
.
2. Dismantle protective trimming cover of heater
core hard pipe.
NL08-0036b
3. Dismantle heater core body assembly.
NL08-0037b
Installation Procedure:
1. Insert heater core body assembly.
NL08-0038b
1788
2. Install protective trimming cover of heater core
hard pipe and tighten it with screw.
3. Install main host assembly of A/C.
NL08-0036b
1789
8.3.8.13 Evaporator temperature sensor replacement
Dismantle procedure
1. For dismantling of main host of A/C,
refer to
8.3.8.4 Replacement of A/C main host assembly
.
2. Separate evaporator assembly and blower
assembly.
3. Disconnect evaporator temperature sensor
harness connector.
NL08-0039b
4. Dismantle evaporator temperature sensor
connector.
Notes:
Be capable of sliding the sensor together with the
fixing clip backward.
NL08-0040b
5. Rotate the evaporator temperature sensor by a
certain angle counterclockwise and then pull out.
NL08-0041b
1790
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст