Geely Emgrand X7. Manual part — 446

8.3.8.7 Blower speed regulation module replacement

Dismantle procedure

Warning!

Warning: refer to "warning for battery disconnection" in "warnings and precautions".

1. Disconnect the battery negative cable. refer to

2.11.8.1 Battery cable disconnection/connection
procedures.

2. For dismantling of main host of A/C, refer to

8.3.8.4 replacement of A/C main host assembly.

3. Disconnect blower speed regulation module

harness connector.

4. Dismantle fixing screw of blower motor speed

adjusting module.

NL08-0027b

Installation Procedure:

1. Install blower adjusting module fixing screw.

2. Connect blower speed adjusting module

harnesses connector.

3. Install main host of A/C.

4. Connect the negative cable of the battery.

NL08-0027b

1783

8.3.8.8 Blower motor replacement

Dismantle procedure

Warning!

Warning: Refer to "Warning for battery disconnection" in "warnings and precautions".

1. Disconnect the battery negative cable. Refer to

2.11.8.1 battery cable disconnection/connection
procedures.

2. For dismantling of main host of A/C, refer to

8.3.8.4 Replacement of A/C main host assembly.

3. Disconnect blower motor harnesses connector.

4. Dismantle 3 fixing screws of blower motor, and

remove blower motor.

NL08-0028b

Installation procedure:

1. Install blower motor and tighten fixing screw.

2. Connect the harness connector of the blower

motor.

3. Install main host of A/C.

4. Connect the battery negative cable.

NL08-0029b

1784

8.3.8.9 Inside and outside circulation adjusting motor replacement

Dismantle procedure

1. For dismantling of main host of A/C, refer to

8.3.8.4 Replacement of A/C main host assembly.

2. Disconnect internal and outside circulation

adjusting motor harnesses connector.

3. Dismantle 3 fixing screws of interior and exterior

circulation adjusting motor.

4. Remove the internal and external air circulation

regulation motors.

NL08-0030b

Installation Procedure:

1. Install inner and outside circulation adjusting

motor and tighten it with screw.

2. Connect inner and outside circulation adjusting

motor harnesses connector.

3. Install main host assembly of A/C.

NL08-0031b

1785

8.3.8.10 Cold-warm wind direction adjusting motor replacement

Dismantle procedure

1. For dismantling of main host of A/C, refer to

8.3.8.4 Replacement of A/C main host assembly.

2. Disconnect cold-warm air adjusting motor

harnesses connector.

3. Dismantle 3 fixing screws of cold and warm air

direction adjusting motor.

4. Dismantle 3 fixing screws of cold and warm air

direction adjusting motor.

NL08-0032b

Installation Procedure:

1. Install cooling and warm air adjusting motor and

tighten it with screw.

2. Connect cold and warm air direction adjusting

motor harnesses connector.

3. Install A/C main host assembly.

NL08-0033b

1786