Geely Emgrand X7. Manual part — 285

23. Install neutral gear return spring.

24. Install controller housing.

Note: The extruded sealant line shall be uniform
and continuous. Not disconnection or excessive
application is allowed.

25. Install seal gasket.

26. Install interlocking plate bolt.

27. Install seal gasket.

28. Install lifting spring components.

29. Install seal gasket.

30. Install reverse lamp switch.

31. Install speedometer gear.

32. Install selecting lever.

33. Install gear shifting cable bracket.

34. Install rolling limiter bracket.

GC03-0064b

1139

3.3.6.5 Input shaft disassemble and assemble

Dismantle procedure

1. Dismantle the snap ring.

2. Dismantle

ball-bearing.

3. Dismantle the position limiting mechanism of

thrust plate.

4. Dismantle

thrust

plate.

GC03-0065b

5. Install the 5th speed gear .

GC03-0066b

6. Install the 4th speed gear.

GC03-0067b

7. Dismantle

needle

bearing.

8. Dismantle the 4th speed sleeve.

9. Dismantle synchronizer ring.

1140

10. Dismantle synchronizer spring.

11. Dismantle synchronizer sleeve.

12. Dismantle the 3rd - 4th synchronizer hub.

13. Dismantle synchronizer ring.

14. Dismantle synchronizer spring.

15. Dismantle the 3rd speed gear.

16. Dismantle ball-bearing.

17. Dismantle the snap ring.

18. Dismantle front bearing.

19. Dismantle the oil seal.

20. Dismantle input shaft.

GC03-0068b

Installation procedure:

1. Install input shaft.

2. Install the oil seal.

3. Install front bearing.

GC03-0070b

4. Install

needle

bearing.

油封

3.5mm

GC03-0069b

Oil seal

1141

5. Install snap ring.

Note: select spring snap ring thickness to make
axial clearance for input shaft front bearing
conform to standards.

Standard value: -0.01～0.12 mm

GC03-0071b

6. Install the 3rd speed gear .

7. Install synchronizer spring.

8. Install synchronizer ring.

GC03-0072b

9. Install the 3rd - 4th speed synchronizer hub.

Note: when installing the synchronizer, confirm if
the synchronizer is blocked.

识别记号

变速器后部

GC03-0073b

Transmissionrear

-end

Identification mark

1142