Geely Emgrand X7. Manual part — 351
Geely Emgrand X7. Manual part - 351
3.5.7.7 Shifter replacement
Dismantle procedure
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery cable disconnection/connection
procedures.
2. Dismantle auxiliary instrument panel on the top
of selector, refer to 12.8.3.4 Auxiliary Instrument
Panel Assembly Replacement.
3. Disconnect connection of shifter and instrument
harness harness
SL03-0001c
4. Dismantle gearshifting flexible shaft.
SL03-0002c
5. Dismantle the shift gear fixing bolts.
6. Dismantle the shift gear assembly.
SL03-0004c
1403
7. Extract the U-shaped clamping plate from the
fixing bracket for the shift shaft on the
transmission side and loosen the nut for fixing the
transmission shift swing arm with the shift shaft.
CE03-5003b
8. Dismantle the bolt for fixing the flexible shaft
sealing pressure plate and Dismantle the flexible
shift shaft from the body floor.
SL03-0003c
Installation procedure::
1. Install gearshifting flexible shaft.
2. Install U-clip plate on fixing bracket of
gearshifting flexible shaft on transmission side
and nut of fixing transmission gearshifting swing
arm and gearshafting flexible shaft.
CE03-5003b
1404
3. Install shifter assembly and tighten fixing bolt .
Torque: 16~26 N.m (Metric system)
9.9~16.2
lb-ft(English system)
SL03-0004c
4. Connect gear selector and gearshift flexible shaft.
5. Install and secure the bolts on the soft shaft
sealing pressure plate.
6. Connect the shift gear with the instrument
harness connector.
7. Install t he floor console over the shift gear.
8. Connect battery negative cable.
SL03-0001c
1405
3.5.7.8 replace automatic transmission control module
Dismantle procedure
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery cable disconnection/connection
procedures.
2. For dismantling of sundries box of instrument,
refer 12.8.3.2 Replacement of sundries box
3. Disconnect connection of Automatic transmission
control module harness.
4. Dismantle fixing bolt of automatic transmission
control module.
5. Dismantle the automatic transmission control
module.
NL03-2004c
Installation procedure:
1. Install automatic transmission control module
and tighten fixing bolt.
2. Connect wire harness of automatic transmission
control module.
3. Install the glove box of instrument panel.
4. Connect battery negative cable.
NL03-2003c
1406
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст