Geely Emgrand X7. Manual part — 598
Geely Emgrand X7. Manual part - 598
11.8 Sunroof
11.8.1 Specification
11.8.1.1 Fastener specifications
Torque range
Fastener name
Model
Metric (N.m)
English system
(lb-ft)
Front reading light sunroof switch
assembly screws
St4.2×16
2-4
2-3
Sunroof assembly bolts
M6×20
7-9
5-7
Sunroof attachment bracket bolts
M6×14
7-10
5-8
Sunroof front/middle attachment
bracket bolts
M6 7-9
5-7
11.8.1.2 Sunroof motor specification
Parameters Rating
Working voltage range
13.5V
Naximum load rotation
102(RPM)
Maximum load current
8.1A
Minimum no-load rotation
100(RPM)
Maximum no-load current
3 (A)
Maximum locked-rotor current
17.7 (A)
Maximum locked-rotor torque
8.6(N.m)
2391
11.8.2 Decryption and operated
11.8.2.1 Description and operation
System components
– Sunroof
control
module
–
Sunroof switch assembly with interior reading lamp
–
Sunroof motor with Hall sensor
– Sunroof
– Sunvisor
Common operation
–
Any button operation of which the swtich reaction time is less than 10ms(±5ms) is invalid.
–
Sunroof switch assembly with interior reading lamp
–
Fast operating mode allows sunroof automatically open or close without the need to hold the
switch. This function is activated when the switch signal is more than 500ms, and can be
achieved when sliding and tilting.
–
Limit control: when the glass panel move from warped position to the totally closed status,
the limit control shall start to work.
–
Comfortable position stop: when the glass panel is opened in sliding zone, it will stop at an
adjusting position before it is totally opened. When the glass panel is in an open status, this
position can reduce wind noise. When the glass panel stops at this position, the user can
continue opening it by switch operation if he wants to open the glass panel totally.
Anti-clamp function
During the process in which the glass panel is being closed, the Anti-clamp system shall supervise
the barriers. If there is any barrier, the Sunroof shall return to the position 200mm from the normal
closed position. The Anti-clamp function shall work when it is sliding quickly or the warped
position is closed.
2392
11.8.3 System work principle
11.8.3.1 System operating principle
Terminal diagram
NL11-0020c
4
3
1
2
14 13 12
11 10 9 8
5
6
7
RF07 天窗模块线束连接器
Sunroof motor and control module are integrated with a total of 14-pin wiring harness connector.
Terminals are defined as following:
Terminal No.
Terminal
definition
Diameter/color Terminal
status
Descriptions
1
+B power supply
1.25R
Power supply
Battery power
supply
2
Frequency signal
(
low)
0.5R Output
Ground
3
Frequency signal
(
high)
0.5Y
IG1 power
supply
Ig1 signal
4 Ground
1.25B
Ground
Ground
5
Open by sliding
0.3Y
Output
Slide on signal
6
Off by sliding
0.3L
Output
Slide off signal
7 Rapid
slide 0.3O Output
Rapid slide
signal
8
Warp on
0.3B/O
Output
Warp on signal
9
Warp off
0.3P
Output
Warp off signal
RF07 sunroof module harness connector
2393
10 Rapid
warp
0.3B/Y Output
Rapid warp
signal
11
/ / / /
12
/ / / /
13
/ / / /
14
/ / / /
Tilt switch and slide switch are ground signals, when the switch is pressed, the signal circuit will
have a low voltage.
11.8.4 Part position
11.8.4.1 Component position
Sunroof switch assembly
NL11-2134b
2394
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст