Geely EC718, EC718RV, EC715, EC715RV. Manual part — 143
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 143
FE02-0331b
5.
Remove the left side of the fan cover retaining bolt.
FE02-0332b
6.
Remove the fan assembly from the vehicle.
Installation Procedure:
FE02-0333b
1.
Install the fan assembly to the vehicle.
Engine
Cooling System JL4G18-D
2-487
FE02-0334b
2.
Install the right side of the fan cover retaining bolt.
Torque: 9 Nm (Metric) 6.7 lb-ft (US English)
FE02-0335b
3.
Install the left side of the fan cover retaining bolt.
Torque: 9 Nm (Metric) 6.7 lb-ft (US English)
FE02-0336b
4.
Connect the cooling fan motor wiring harness connector.
2-488
Cooling System JL4G18-D
Engine
FE02-0337b
5.
Install the radiator air baffle and deflector.
6.
Connect the battery negative cable.
2.8.8.4 Thermostat Replacement
Removal Procedure:
Warning!
Refer to "Cooling System Service Warning" in "Warnings
and Notices".
FE02-0338b
1.
Discharge the engine coolant. Refer to
2.
Loosen the radiator outlet pipe clamp from the engine
coolant inlet pipe.
FE02-0339b
3.
Disconnect the radiator outlet pipe from the engine
coolant inlet pipe.
Engine
Cooling System JL4G18-D
2-489
FE02-0340b
4.
Remove the engine coolant inlet pipe to the cylinder block
retaining nuts.
FE02-0341b
5.
Remove the engine coolant inlet pipe component from the
cylinder block.
FE02-0342b
6.
Remove the thermostat from the cylinder block.
Note
The thermostat and seals are integrated.
7.
Clean the engine coolant inlet pipe and cylinder block
mating surface.
2-490
Cooling System JL4G18-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст