Geely EC718, EC718RV, EC715, EC715RV. Manual part — 344
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 344
Installation Procedure:
2
2
1
FE08-0013b
1.
Install the warm air pipe (1) and tighten the retaining clamp
(2).
Note
Inlet and outlet warm air pipe removal is similar.
8.2.8.3 Air-conditioning Pressure Switch
Replacement
Removal Procedure
Warning!
Refer to "Breathing R-134a Warning" in "Warnings and
Notices".
1
2
FE08-0014b
1.
Carry out the air-conditioning refrigerant recovery
procedure. Refer to
2.
Disconnect the battery negative cable.Refer to
.
3.
Disconnect the air-conditioning refrigerant pressure
switch harness connector (1) and remove the air-
conditioning refrigerant pressure switch (2).
Heating, Ventilation and A/C System
Automatic Air-conditioning
8-47
Installation Procedure:
FE08-0015b
1.
Connect the air-conditioning refrigerant pressure switch
(1) and connect the air-conditioning refrigerant pressure
switch harness connector (2).
Note
During installation, all the O-rings must be replaced.
2.
Carry out air-conditioning refrigerant filling process.
3.
Connect the battery negative cable.
8.2.8.4 Air Filter Replacement
Removal Procedure
FE08-0016b
1.
Remove the glove box. Refer to
FE08-0017b
2.
Pull out the air-conditioning filter housing.
8-48
Automatic Air-conditioning
Heating, Ventilation and A/C System
FE08-0018b
3.
Remove the air-conditioning filter.
Installation Procedure:
FE08-0019b
1.
Install the air-conditioning filter.
2.
Install the air-conditioning filter housing.
3.
Install the glove box.
8.2.8.5
Air-conditioning
Assembly
Replacement
Removal Procedure
Warning!
Refer to "Breathing R-134a Warning" in "Warnings and
Notices".
Heating, Ventilation and A/C System
Automatic Air-conditioning
8-49
FE08-0030b
1.
Carry out air-conditioning refrigerant recovery procedure.
Refer to
Air-conditioning Refrigerant Recovery
2.
Discharge the engine coolant. Refer to
3.
Remove the evaporator side high and low pressure pipe
connection nuts.
FE08-0031b
4.
Remove the heater core side warm air inlet and outlet pipe
clamps and remove the inlet and outlet pipes from the
heater core.
FE08-0032b
5.
Remove
the
instrument
panel.
Refer
to
.
6.
Remove the instrument panel retainers. Refer to
Instrument Panel Carrier Replacement
.
7.
Disconnect the air-conditioning assembly harness
connector.
8-50
Automatic Air-conditioning
Heating, Ventilation and A/C System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст