Geely EC718, EC718RV, EC715, EC715RV. Manual part — 465
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 465
Light Flash Alarm
Horn Alarm
Alarm Trigger
(e.g. Door Open)
Sound Alarm Cycle = 300 s
Alarm Cycle = 300 s
500 ms
500 ms
500 ms
500 ms
500 ms
500 ms
FE11-0801b
Note
In the anti-theft or alarm mode, BCM will prohibit the
starter relay coil to work.
Lift Anti-theft
Using the remote control or by releasing CAN signals received
from the EMS to lift anti-theft or alarm mode (turn signal lamps
flash / horn sound). When the radio remote control is not
powered, in the anti-theft mode, insert the key into the ignition
switch, start the engine and lift the anti-theft or alarm at the
same time.
Mute Mode
–
In the anti-theft mode, press the remote control "lock"
"unlock" button at the same time for more than two 2 s, turn
signal lamps flash twice, the mode mode is activated. In
mute mode, the alarm horns do not sound.
–
Press the remote control "lock" "unlock" button at the same
time for more than two 2 s, turn signal lamps flash twice,
the mode mode is deactivated.
Locating Vehicle Feature
In the anti-theft mode, press the lock button twice within 500ms,
horns sound three times, turn signal lamps flash three times (in
the absence of dual lock).
Remote Control Learn
In the anti-theft lifted status, open the driver door, turn the key
from "OFF" to "ON " 6 times within 10 s, and stops at the "OFF"
position, at this time, anti-theft indicator light indicating the
system is in learn mode. Hold any key on the remote control, if
the anti-theft lights flash once, it indicates a successful learn.
Four keys can be learned. After 10 s or after the completion of
four keys learn, or at least the completion of one key learn, turn
the ignition lock to "ON" to exit.
Body Electric
Remote Anti-theft System
11-373
11.10.3 System Working Principle
11.10.3.1 System Working Principle
Hood Ajar Switch
There is a contact switch under the engine hood. When the
engine hood is closed, the switch is opened; once the engine
hood is opened, this switch is closed and sends a ground signal
to the BCM. Based on this signal, BCM sends "Engine hood is
not closed warning lamp" message through CAN bus to the
instrument panel.
Rear Compartment (Hatchback) Contact
Switch
In the rear compartment (rear door), Office of settings are a
touch switch, when the rear compartment (back gate) is closed
for this switch off; Once the rear compartment (back gate) is
opened, this switch is closed, and BCM transmit signals to the
ground, BCM based on this signal sent through the CAN bus
to the instrument light "rear compartment (rear door) is not
closed warning lamp" information.
Door Contact Switch
In each door lock assembly, there is a contact switch. When a
door is closed, the switch is opened; once a door is opened,
the door contact switch is closed and sends a ground signal to
BCM. Based on this signal, BCM sends a "Door open"
message through the CAN bus to the instrument.
Anti-theft Indicator
Anti-theft indicator is a light-emitting diode, its power supply is
supplied through the circuit. When the system enters anti-theft
mode, BCM provides ground circuit to control their flashing.
Anti-theft Horn
Anti-theft horns are located in the rear compartment (rear of the
body on a Hatchback) left side interior panel, and have ground
circuits. When the system enters the anti-theft alarm trigger
mode, BCM provides ground power, controls the horn sound.
Turn Signal
Exterior Lighting Description and Operation
11-374
Remote Anti-theft System
Body Electric
11.10.4 Component Locator
11.10.4.1 Component Locator
Hood Ajar Switch
1
FE11-0802b
Legend
1. Hood Ajar Switch
Body Electric
Remote Anti-theft System
11-375
BCM
FE11-0803b
11-376
Remote Anti-theft System
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст