Geely EC718, EC718RV, EC715, EC715RV. Manual part — 506
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 506
12.3 Body Rear End
12.3.1 Specifications
12.3.1.1 Fastener Tightening Specifications
Application
Model
Specification
Metric (Nm)
US English (lb-ft)
Rear Compartment Lid Lock
Actuator Retaining Bolts
M6 × 10
9-13
6.7-9.6
Rear Compartment Lid Hinge
Retaining Bolts
M8 × 35
9-13
6.7-9.6
Rear Compartment Lid Latch
Striker Retaining Bolts
M6 × 12
9-13
6.7-9.6
Fuel Filler Door Release
Actuator Retaining Screws
M6 × 20
9-13
6.7-9.6
Hatchback Open Handle
Retaining Nut
M6
9-13
6.7-9.6
Hatchback Latch Retaining
Bolts
M8 × 22
23-30
17-22.2
Hatchback Latch Striker Nuts
M6
9-13
6.7-9.6
Hatchback to Hinge Retaining
Bolts
M8 × 35
23-30
17-22.2
Hinge to Body Retaining Nuts
M8
23-30
17-22.2
Body, Sheet Metal and Painting
Body Rear End
12-13
12.3.2 Component Locator
12.3.2.1 Component Views
1
2
FE12-1002b
Legend
1. Fuel Filler Door Release Handle
2. Fuel Filler Door Release Cable
12-14
Body Rear End
Body, Sheet Metal and Painting
12.3.3 Removal and Installation
12.3.3.1 Rear Compartment Lid Replacement
(Sedan)
Removal Procedure:
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE12-0116b
1.
Disconnect the battery negative cable. Refer to
.
2.
Open and Support the rear compartment lid with a suitable
brace.
3.
Remove the rear compartment lid inner panel trim. Refer
to
Rear Compartment Trim Panel Replacement
4.
Remove all the rear compartment lid wiring harness
retaining clips, rear compartment latch connectors and
two license plate lamp harness connectors.
FE12-0117b
5.
Remove rear compartment lid hinges retaining bolts and
hinges assembly.
6.
With the aid of an assistant, remove the rear compartment
lid.
Body, Sheet Metal and Painting
Body Rear End
12-15
Installation Procedure:
FE12-0118b
1.
Install the rear compartment lid to hinges and tighten the
retaining bolts.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
2.
Install the wiring harness clips onto the rear compartment
lid.
3.
Connected the rear compartment lid latch and two license
plate lamp harness connectors.
4.
Install the rear compartment lid inner panel trim.
5.
Close the rear compartment lid.
6.
Connect the battery negative cable.
12.3.3.2 Rear Compartment Lid Torsion Spring
Replacement (Sedan)
Removal Procedure:
FE12-0119b
1.
Detach the rear compartment lid torsion spring form the
rear compartment lid torsion spring bracket (Left).
FE12-0120b
2.
Detach the rear compartment lid torsion spring from the
rear compartment lid hinge (Left).
12-16
Body Rear End
Body, Sheet Metal and Painting
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст