Geely EC718, EC718RV, EC715, EC715RV. Manual part — 523

2

1

1

1

1

FE12-0050b

6.

Press the lower part of the center pillar upper trim panel
to secure the clips and the retaining tang (1).

7.

Install the door seal (2).

8.

Install the left and right door sill nameplate.

12.9.1.5 Rear Quarter Upper Trim Panel
Replacement (Sedan)

Removal Procedure:

Note

To remove the rear quarter upper trim panel, please use
interior trim panel removal tools. Otherwise, the rear
quarter upper trim panel will easily be scratched.

3

2

1

FE12-0051b

1.

Fold down the rear seat back and remove the rear seat
armrest. Refer to

12.7.3.6

Rear Seat Armrest Assembly

Replacement

.

2.

Remove the rear door seal and the rear compartment lid
seal (1).

3.

Remove the rear quarter upper trim panel retaining screw
cover (2).

Body, Sheet Metal and Painting

Interior Trim

12-81

3

1

2

FE12-0052b

4.

Remove the rear quarter upper trim panel retaining screw
and washer assembly (1).

5.

Remove the rear quarter upper trim panel retaining clips
(2).

6.

Pull upward to remove the rear quarter upper trim panel.

Installation Procedure:

1

5

3

4

2

FE12-0053b

1.

Install the rear quarter upper trim panel to the rear parcel
shelf mounting hole (1).

2.

Press the rear quarter upper trim panel to secure the
retaining clip (2).

3.

Install the rear quarter upper trim panel retaining screw
and washer assembly (3)

Torque: 3.5 Nm (Metric) 2.6 lb-ft (US English)

4.

Install the rear quarter upper trim panel retaining screw
cover (4).

5.

Install the door seal (5).

6.

Install the rear seat armrest and pull the rear seat back to
the upright position.

Note

The rear quarter upper trim panel replacement is the
same for both sides.

12.9.1.6 Rear Quarter Upper Trim Panel
Replacement (Hatchback)

Removal Procedure:

Note

To remove the rear quarter upper trim panel, please use
interior trim panel removal tools. Otherwise, the rear
quarter upper trim panel will easily be scratched.

12-82

Interior Trim

Body, Sheet Metal and Painting

3

1

1

2

FE12-0054c

1.

Fold down the rear seat back and remove the rear seat
armrest. Refer to

12.7.3.6

Rear Seat Armrest Assembly

Replacement

.

2.

Remove the rear door seal and the hatchback seal (1).

3.

Remove the rear parcel shelf mounting bracket (2). Refer
to

12.9.1.8

Rear Parcel Shelf Replacement (Hatchback)

.

4.

Remove the rear quarter upper trim panel retaining screw
cover (3).

1

1

2

FE12-0055c

5.

Remove the rear quarter upper trim panel retaining screw
and washer assembly (1).

6.

Remove the rear quarter upper trim panel retaining clips
(2) and remove the Remove the rear quarter upper trim
panel.

Installation Procedure:

2

3

2

1

FE12-0056c

1.

Press the rear quarter upper trim panel to secure the
retaining clip (1).

2.

Install the rear quarter upper trim panel retaining screw
and washer assembly (2).

Torque: 3.5 Nm (Metric) 2.6 lb-ft (US English)

3.

Install the rear quarter upper trim panel retaining screw
cover (3).

Body, Sheet Metal and Painting

Interior Trim

12-83

2

2

1

FE12-0057c

4.

Install the rear parcel shelf (1).

5.

Install the rear door seal and the hatchback seal (2).

6.

Install the rear seat armrest and lift the rear seat back to
the upright position.

Note

The rear quarter upper trim panel replacement is the
same for both sides.

12.9.1.7 Rear Parcel Shelf Replacement
(Sedan)

Removal Procedure:

Note

To remove the rear parcel shelf, please use interior trim
panel removal tools. Otherwise, the rear parcel shelf
panel will easily be scratched.

4

1

1

2

3

3

3

2

2

FE12-0058b

1.

Fold down the rear seat back and remove the rear seat
armrest. Refer to

12.7.3.6

Rear Seat Armrest Assembly

Replacement

.

2.

Remove the rear quarter upper trim panel. Refer to

12.9.1.5

Rear Quarter Upper Trim Panel Replacement

(Sedan)

.

3.

Remove the rear seat belt buckle retaining bolt (2). Refer
to

9.3.7.4

Rear Seat Belt Retractor Replacement

.

4.

Remove the rear parcel shelf retaining clips (3).

5.

Lift the rear parcel shelf to detach the D-shape retaining
tangs from the vehicle body.

6.

Lift the rear parcel shelf to detach the D-shape retaining
tangs from the vehicle body mounting hole (4) and pull the
rear parcel shelf forward.

7.

Disconnect the center high mounted brake lamp harness
connector, slide the center seat belt through the center
seat belt slot and remove the rear parcel shelf trim panel.

12-84

Interior Trim

Body, Sheet Metal and Painting