Geely EC718, EC718RV, EC715, EC715RV. Manual part — 401
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 401
FE11-0217b
2.
Connect the headlamp switch wiring harness connector
FE11-0209b
3.
Install and tighten the upper and lower steering column
shield panel retaining screws.
Note
Refer to "Fastener Notice" in "Warnings and
Notices".
Torque: 8.8 Nm (Metric) 6.5 lb-ft (US English)
4.
Connect the battery negative cable.
11.4.8.2 Fog Lamp Switch Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE11-0220b
1.
Disconnect the battery negative cable.
.
2.
Remove
cigarette
lighter
panel.
Refer
to
.
3.
Disconnect the fog lamp, cigarette lighter and AUX wiring
harness connectors.
Note
To remove interior panels, please use interior trim
removal special tools, otherwise the interior trims
will be easily scratched.
Body Electric
Lighting System
11-117
FE11-0221b
4.
Remove the rear fog lamp switch from back of the
cigarette lighter panel.
Installation Procedure:
FE11-0222b
1.
Install the rear fog lamp switch.
2.
Connect the fog lamp, cigarette lighter and AUX wiring
harness connectors.
3.
Install the cigarette lighter panel.
4.
Connect the battery negative cable.
11.4.8.3 Vanity Mirror Lamp Replacement
Removal Procedure
FE11-0223b
1.
Remove the vanity mirror lamp cover.
2.
Remove the vanity mirror lamp bulb.
11-118
Lighting System
Body Electric
Installation Procedure:
FE11-0224b
1.
Install the vanity mirror lamp bulb.
2.
Press the vanity mirror lamp cover into place.
11.4.8.4 Dome Lamp and Reading Lamp
Replacement
Front Dome Lamp Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE11-0225b
1.
Disconnect the battery negative cable. Refer to
.
2.
Open the glasses case and remove the screw.
Body Electric
Lighting System
11-119
1
2
FE11-0226b
3.
Remove the dome lamp, disconnect the wiring harness
connector (1).
4.
Remove the lamp bulb (2).
Installation Procedure:
2
1
FE11-0582b
1.
Install the lamp bulb (1).
2.
Connect the electrical wiring harness connector (2).
FE11-0227b
3.
Install the dome lamp and tighten the retaining screws.
Note
"Fastener Notice" in "Warnings and Notices".
Torque: 3 Nm (Metric) 2.2 lb-ft (US English)
4.
Connect the battery negative cable.
11-120
Lighting System
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст