Geely EC718, EC718RV, EC715, EC715RV. Manual part — 402
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 402
Rear Dome Lamp and Reading Lamp
Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE11-0229b
1.
Disconnect the battery negative cable. Refer to
.
2.
Insert a special tool to the dome lamp cover edge to
remove the cover.
FE11-0228b
3.
Remove the screws and the door controlled lamp cover.
1
2
2
FE11-0230b
4.
Disconnect the rear dome lamp wiring harness connector
(1).
Body Electric
Lighting System
11-121
5.
Remove the lamp bulb (2).
Installation Procedure:
1.
Install the lamp bulb (1).
2.
Connect the electrical wiring harness connector (2).
3.
Install the rear dome lamp.
Note
"Fastener Notice" in "Warnings and Notices".
Torque: 4 Nm (Metric) 3 lb-ft (US English)
4.
Press the door controlled lamp cover into place.
5.
Connect the battery negative cable.
11.4.8.5 Rear Compartment Lamp (Hatchback
Lamp) Replacement
Removal Procedure
FE11-0231b
1.
Remove the rear compartment lamp cover.
Note
Hatchback lamp cover for hatchback.
2.
Remove the rear compartment lamp (Hatchback Lamp)
bulb.
Installation Procedure:
FE11-0232b
1.
Install the rear compartment lamp (Hatchback Lamp)
bulb.
2.
Install the rear compartment lamp cover (hatchback lamp
cover).
11-122
Lighting System
Body Electric
11.4.8.6 Glove Box Lamp Replacement
Removal Procedure
FE11-0233b
1.
Remove the glove box lamp cover.
2.
Disconnect the wiring harness connector.
3.
Remove the glove box lamp bulb.
Installation Procedure:
FE11-0234b
1.
Install the glove box lamp bulb.
2.
Connect the wiring harness connector.
3.
Press the glove box lamp cover into place.
11.4.8.7 Front Fog Lamp Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
Body Electric
Lighting System
11-123
FE11-0235b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the engine bottom shield. Refer to
and Right Engine Bottom Shield Replacement
.
FE11-0237b
3.
Disconnect the fog lamp assembly wiring harness
connector.
FE11-0239b
4.
Remove the fog lamp retaining bolts.
5.
Remove the fog lamp assembly.
6.
Loose the fog lamp assembly screws and remove the
bulb.
11-124
Lighting System
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст