Geely EC718, EC718RV, EC715, EC715RV. Manual part — 89
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 89
Installation Procedure:
FE02-0438b
1.
Install the heated pre-catalytic oxygen sensor.
FE02-0437b
2.
Tighten the heated pre-catalytic oxygen sensor.
3.
Install the three-way catalytic converter.
4.
Connect the battery negative cable.
2.4.7.3 Canister Solenoid Valve Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
Engine
Auxiliary Emission Control JL4G18-D
2-271
FE02-0439b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the canister solenoid valve from the mounting
bracket.
FE02-0440b
3.
Disconnect the canister solenoid valve vacuum tube.
FE02-0441b
4.
Disconnect canister solenoid valve wiring harness
connector.
2-272
Auxiliary Emission Control JL4G18-D
Engine
Installation Procedure:
FE02-0442b
1.
Connect canister solenoid valve wiring harness
connector.
FE02-0443b
2.
Connect canister solenoid valve vacuum tube.
FE02-0444b
3.
Install the canister solenoid valve to the mounting bracket.
4.
Connect the battery negative cable.
Engine
Auxiliary Emission Control JL4G18-D
2-273
2.5 Engine Anti-theft System JL4G18-D
2.5.1 Specifications
2.5.1.1 Fastener Tightening Specifications
Applications
Model
Specifications
Metric (Nm)
US English (lb-ft)
Engine Anti-theft System
Control Module Bracket Bolts
M6
8-10
6-7.4
2-274
Engine Anti-theft System JL4G18-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст