Geely EC718, EC718RV, EC715, EC715RV. Manual part — 260

FE03-0079b

19. Install and tighten the reverse shift shaft retaining bolts.

FE03-0080b

20. Install the reverse shift shaft return spring.

FE03-0081b

21. Install the transmission case inner magnet.

Transmission / Drive Axle

Manual Transmission

3-83

FE03-0082b

22. As shown in the graphic, confirm that all shift shafts are in

neutral (all forks are at the same level).

FE03-0083b

23. Install the transmission rear case.

FE03-0084b

24. Install and tighten the transmission case external retaining

bolts.

3-84

Manual Transmission

Transmission / Drive Axle

FE03-0085b

25. Install and tighten reverse gear shaft retaining bolt.

FE03-0086b

26. Install and tighten the transmission case internal retaining

bolts.

27. Install the shift control assembly.

28. Install the transmission.

3.3.8.7 Input Shaft Disassemble and Assemble

Removal Procedure:

FE03-0087b

1.

Remove the transmission. Refer to

3.3.8.3

Transmission

Assembly Replacement

.

2.

Remove shift control assembly. Refer to

3.3.8.4

Shift

Control Assembly Replacement

.

3.

Remove the shift shaft. Refer to

3.3.8.6

Shift Shaft

Replacement

.

4.

Remove the input shaft assembly from the transmission.

Transmission / Drive Axle

Manual Transmission

3-85

FE03-0088b

5.

Pull out the input shaft rear bearing with a bearing puller.

FE03-0090b

6.

Remove the 5th gear synchronizer assembly.

Gear Synchronizer Sleeve and The Shift Fork Distance:
≤0.35 mm (13.780 × 10

-3

in)

Synchronizer Back and the Gear Surface Distance:
≥0.8 mm (31.496 × 10

-3

in)

FE03-0091b

7.

Remove the 5th gear, needle roller bearing and needle
roller bearing washer.

3-86

Manual Transmission

Transmission / Drive Axle