Geely EC718, EC718RV, EC715, EC715RV. Manual part — 359

Installation Procedure:

FE09-0010b

1.

Connect the clock spring harness connector and install
the clock spring to the steering column.

Note

Do not unplug the clock spring locking pin.

FE09-0011b

2.

Install the steering column upper and lower shield panels.

3.

Install the clock spring

4.

Unplug the clock spring locking pin.

5.

Install the steering wheel.

6.

Install the driver front airbag.

7.

Connect the battery negative cable.

9.2.7.4 Passenger Front Airbag Replacement

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

Warning!

Refer to "Supplement Protection System Warning" in
"Warnings and Notices".

Safety Protection Device

Airbag System

9-35

FE09-0018b

1.

Disconnect the battery negative cable. Refer to

2.11.8.1

Battery Disconnection

.

2.

Remove the glove box. Refer to

12.8.3.2

Glove Box

Replacement

.

3.

Remove

the

instrument

panel.

Refer

to

12.8.3.1

Instrument Panel Replacement

.

4.

Disconnect passenger front airbag wiring harness
connector.

5.

Remove the passenger front airbag.

Installation Procedure:

FE09-0019b

1.

Install the passenger front airbag.

2.

Connect the passenger front airbag wiring harness
connector.

3.

Install the instrument panel.

4.

Install the glove box.

5.

Connect the battery negative cable.

9.2.7.5 Curtain Airbag Replacement (If
equipped)

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

9-36

Airbag System

Safety Protection Device

FE09-0026b

1.

Disconnect the battery negative cable. Refer to

2.11.8.1

Battery Disconnection

.

2.

Remove the headliner. Refer to

12.9.1.1

Headliner

Replacement

.

3.

Disconnect the curtain airbag harness connector.

FE09-0027b

4.

Disconnect the curtain airbag front retaining cord.

FE09-0028b

5.

Remove the curtain airbag retaining clips with a plier.

Safety Protection Device

Airbag System

9-37

FE09-0029b

6.

Remove the curtain airbag retaining retaining bolts and
remove the curtain airbag.

Installation Procedure:

FE09-0030b

1.

Install the curtain airbag.

FE09-0031b

2.

Install and tighten the curtain airbag retaining bolts,
preload the curtain airbag retaining nut first until the cord
and retaining buckle installed, and then tighten the curtain
airbag retaining bolts.

Torque: 10 Nm (Metric) 7.4 lb-ft (US English)

9-38

Airbag System

Safety Protection Device