Geely EC718, EC718RV, EC715, EC715RV. Manual part — 360

FE09-0032b

3.

Fix the curtain airbag retaining Cord.

Note

Cord can not be distorted.

FE09-0033b

4.

Install the curtain airbag retaining clips.

FE09-0034b

5.

Connect the curtain airbag harness connector.

6.

Install the headliner.

7.

Connect the battery negative cable.

9.2.7.6 Front Collision Sensor Replacement

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

Safety Protection Device

Airbag System

9-39

FE09-0039b

1.

Disconnect the battery negative cable and wait for at least
90s. Refer to

2.11.8.1

Battery Disconnection

.

2.

Remove the battery and the battery bracket. Refer to

2.11.8.2

Battery Replacement

.

3.

Disconnect the left front collision sensor wiring harness
connector.

4.

Remove left front collision sensor retaining bolts and
remove the left front collision sensor.

Installation Procedure:

FE09-0040b

1.

Install and tighten the left front collision sensor retaining
sensors retaining bolts.

Torque: 8 Nm (Metric) 5.9 lb-ft (US English)

2.

Connect the left front collision sensor wiring harness
connector.

3.

Install the battery and the battery bracket.

4.

Connect the battery negative cable.

Note

Right Front Collision Sensor Replacement is the
same.

9.2.7.7 Side Collision Sensor Replacement (If
equipped)

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

9-40

Airbag System

Safety Protection Device

FE09-0043b

1.

Disconnect the battery negative cable and wait for 90s.
Refer to

2.11.8.1

Battery Disconnection

.

2.

Remove the center upper pillar trim panel. Refer to

12.9.1.4

Center Pillar Trim Panel Replacement

.

3.

Disconnect the side collision sensor harness connector.

4.

Remove the side collision sensor retaining bolts and
remove the sensor.

Installation Procedure:

FE09-0044b

1.

Install the side collision sensor and tighten the retaining
bolts.

Torque: 8 Nm (Metric) 5.9 lb-ft (US English)

2.

Connect the side collision sensor harness connector.

3.

Install the center upper pillar trim panel.

4.

Connect the battery negative cable.

9.2.7.8 Passenger Recognition Sensor
Replacement

Refer to

11.11.8.6

Electric Seat Cushion Replacement

removal

procedure.

9.2.7.9 Side Airbag Replacement

Note

If the side airbag has been deployed, please replace the
front seat back.

Safety Protection Device

Airbag System

9-41

FE09-0041b

1.

Refer

to

11.11.8.4

Electric

Seat

Back

Replacement

removal procedure.

9-42

Airbag System

Safety Protection Device