Geely EC718, EC718RV, EC715, EC715RV. Manual part — 252
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 252
FE03-0006b
5.
Dissemble vehicle speed sensor.
Installation Procedure:
FE03-0007b
1.
Install the vehicle speed sensor driven gear.
FE03-0008b
2.
Install the driven gear retaining ring.
Transmission / Drive Axle
Manual Transmission
3-51
FE03-0009b
3.
Install the vehicle speed sensor and tighten the bolt, note
the location of the washer.
FE03-0010b
4.
Connect the vehicle speed sensor harness connector, as
shown in the graphic.
5.
Connect the battery negative cable.
3.3.8.3 Transmission Assembly Replacement
Removal Procedure:
Warning!
Refer to "Vehicle Lifting Warning" in "Warnings and
Notices".
FE03-0163b
1.
Remove the battery negative cable. Refer to
.
2.
Remove the battery. Refer to
3.
Remove the air filter bracket.
4.
Disconnect
Disconnect the reverse lamp switch wiring harness
connector.
5.
Disconnect the vehicle speed sensor wiring harness
connector.
3-52
Manual Transmission
Transmission / Drive Axle
6.
Disconnect the crankshaft position sensor wiring harness
connector.
7.
Remove the gearshift lever pull bolt. Refer to
.
FE03-0164b
8.
Remove the selector shaft bracket.
FE03-0165b
9.
Remove the selector shaft retaining pin.
FE03-0166b
10. Remove the clutch slave cylinder tube.
Transmission / Drive Axle
Manual Transmission
3-53
FE03-0167b
11. Remove the clutch slave cylinder retaining bolts.
12. Remove the starter cable and the retaining bolts. Refer to
FE03-0168b
13. Remove the transmission upper connecting bolts.
FE03-0169b
14. With an engine hoisting tool, fix the engine.
3-54
Manual Transmission
Transmission / Drive Axle
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст