Geely EC718, EC718RV, EC715, EC715RV. Manual part — 253

FE03-0170b

15. Remove transmission left bracket assembly.

16. Remove the front wheels.

17. Lift the vehicle.

18. Remove the transmission fluid plug, after draining the

transmission fluid, clean and install the transmission plug.
Refer to

3.3.8.1

Transmission Fluid Level Inspection

.

FE03-0171b

19. Remove the steering horizontal bolts.

FE03-0172b

20. Remove the front sub frame and related components.

Refer to

12.6.4.3

Cross Member Replacement

and

12.6.4.2

Subframe Replacement

.

21. Remove the left and right side drive shafts. Refer to

5.3.4.1

Drive Shaft Replacement

.

Transmission / Drive Axle

Manual Transmission

3-55

FE03-0173b

22. Remove the transmission case ground cable.

FE03-0174b

23. Use a jack to support the transmission.

FE03-0175b

24. Remove the transmission rear connecting bolts.

3-56

Manual Transmission

Transmission / Drive Axle

FE03-0176b

25. Remove the transmission bottom connecting bolts.

26. Remove the transmission assembly.

Installation Procedure:

FE03-0177b

1.

Use a flat-panel jack to support the transmission
assembly.

2.

Insert the transmission input shaft into the clutch plates.
Push the transmission to the engine side, pay attention to
locating pin position.

FE03-0178b

3.

Install the transmission rear connecting bolts.

Transmission / Drive Axle

Manual Transmission

3-57

FE03-0179b

4.

Install the transmission rear connecting bolts and the
starter motor bottom retaining bolts.

FE03-0180b

FE03-0180b

5.

Install the starter motor upper retaining bolts and cables.

6.

Remove the flat-panel jack.

FE03-0181b

7.

Install the transmission case ground cable.

8.

Install the left and right drive shafts.

3-58

Manual Transmission

Transmission / Drive Axle