Geely EC718, EC718RV, EC715, EC715RV. Manual part — 363
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 363
1
9 10 11 12 13 14 15 16
23
22
21
20
19
18
17
2
3
4
5
6
7
8
Airbag Control Module 2 Harness
Connector SO08
FE09-5203b
Yes
Step 5
Replace the airbag control module.
(a)
Replace the airbag control module. Refer to
.
(b)
Confirm the repair completed.
Next
Step 6
System normal.
9.3.6.3 Front Passenger Seat Belt Warning Lamp Malfunction
Schematic:
Driver Seat Belt Warning Lamp Inoperative
Diagnostic Steps:
Step 1
Check the instrument cluster wiring harness.
1
2
3
4
5
6
12
11
10
9
8
7
Instrument Cluster Harness
Connector IP01
FE09-5205b
(a)
Check the wiring harness connector IP01 to the instrument
cluster harness and connectors.
(b)
With a multimeter, measure voltage according to the
following table.
Instrument
Cluster Terminal
Signal Name
Voltage Current
2
Power Supply
12 V
1 A
5
Body Ground
1 A
6
Passenger Seat
Belt
5 V
20 mA
Data normal?
No
Repair or replace the wiring harness or
connector
Safety Protection Device
Pretension Seat Belt System
9-51
Yes
Step 2
Check the instrument cluster.
(a)
Adjust the clock display, and check whether it works properly.
No
Replace the instrument cluster.
Yes
Step 3
Check the passenger recognition sensor.
(a)
Disconnect the passenger recognition sensor connector
SO18.
(b)
With a multimeter measure sensor resistance according to
the following conditions.
(c)
Measure resistance value when the passenger seat is
occupied with a multimeter.
Standard Resistance: Less than 100 Ω
(d)
Measure resistance value when the passenger seat is not
occupied with a multimeter.
Standard Resistance: 10 kΩ or higher
Data normal?
No
Replace the passenger recognition sensor
Yes
Step 4
Check the wiring harness (passenger recognition sensor to airbag control module).
1 2
Passenger Recognition Sensor SO18
FE09-5206b
(a)
Disconnect the airbag control module connector IP36.
(b)
Measure resistance between the connector SO18 terminal 2
and the connector IP36 terminal 15 with a multimeter.
(c)
Measure resistance between the connector SO18 terminal 1
and the connector IP36 terminal 16 with a multimeter.
Standard Resistance: Less than 1 Ω
(d)
Measure resistance between the connector SO18 terminals
1,2 and the body ground with a multimeter.
Standard Value: 10 kΩ or higher
Data normal?
No
Repair or replace the wiring harness /
connector
9-52
Pretension Seat Belt System
Safety Protection Device
1
7 8
9 10
16
15
14
13
12
11
2 3 4 5 6
Airbag Control Module 3 Harness Connector IP36
FE09-5207b
Yes
Step 5
Check the wiring harness (airbag control module - the passenger seat belt lock).
1 2
Passenger Seat Belt Buckle Harness
Connector SO20
FE09-5208b
1
9 10 11 12 13 14 15 16
23
22
21
20
19
18
17
2
3
4
5
6
7
8
Airbag Control Module 2 Harness Connector SO08
FE09-5209b
(a)
Disconnect the passenger Seat Belt Lock connector SO20
and the airbag control module connector SO08.
(b)
Measure resistance between the connector SO20 terminal 2
and connector SO08 terminal 11 with a multimeter.
(c)
Measure resistance between the connector SO20 terminal 1
and connector SO08 terminal 12 with a multimeter.
Standard Resistance: Less than 1 Ω
(d)
Measure resistance between the connector SO20 terminals
1,2 and the body grounds with a multimeter.
Standard Value: 10 kΩ or higher
Data normal?
No
Repair or replace the wiring harness or
connector
Yes
Step 6
Replace the passenger seat belt lock assembly.
(a)
Replace the passenger seat belt lock assembly. Refer to
Front Seat Belt Buckle replacement
Safety Protection Device
Pretension Seat Belt System
9-53
Is the passenger seat belt warning lamp normal?
Yes
System normal
No
Step 7
Replace the instrument cluster.
(a)
Replace the instrument cluster. Refer to
.
Is the passenger seat belt warning lamp normal?
Yes
System normal
No
Step 8
Replace the airbag control module.
(a)
Replace the airbag control module. Refer to
.
(b)
Confirm the repair completed.
Next
Step 9
System normal.
9-54
Pretension Seat Belt System
Safety Protection Device
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст