Geely EC718, EC718RV, EC715, EC715RV. Manual part — 361
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 361
9.3 Pretension Seat Belt System
9.3.1 Specifications
9.3.1.1 Fastener Tightening Specifications
Applications
Model
Specifications
Metric (Nm)
US English (lb-ft)
Front Left / Right Seat Belt Retractor
Assembly
US English 7 / 16 × 25
40-50
29.5-36.9
Front Left / Right Seat Belt Buckle Retaining
Bolts
US English 7 / 16 × 32
40-50
29.5-36.9
Front Left / Right Seat Belt Retaining Bolts
US English 7 / 16 × 35
40-50
29.5-36.9
Front Height Adjuster Retaining Bolts
M10 × 26
30-40
22.1-29.5
Rear Seat Left / Right Seat Belt Retractor
Retaining Bolts
US English 7 / 16 × 25
40-50
29.5-36.9
Front Left / Right Seat Belt Guide Ring
Retaining Bolt
US English 7 / 16 × 37
40-50
29.5-36.9
Rear Sear Left / Right Seat Belt Retaining
Bolts
US English 7 / 16 × 35
40-50
29.5-36.9
Rear Middle Seat Belt Retaining Bolts
US English 7 / 16 × 25
40-50
29.5-36.9
Rear Seat Left / Right Seat Belt Buckle
Retaining Bolts
US English 7 / 16 × 25
40-50
29.5-36.9
Rear Seat Belt Mounting Bracket Retaining
Bolts
M10 × 25
30-40
22.1-29.5
Safety Protection Device
Pretension Seat Belt System
9-43
9.3.2 Description and Operation
9.3.2.1 Description and Operation
Seat Belt
Front seats and rear seats all have seat belts, which are the
primary protection measure. In the following circumstances,
the seat belts can be hold the passengers in seats, and reduce
the impact force:
–
Front Collision
–
Rear Collision
–
Side Collision
–
Overturn Caused Collision
All vehicles are equipped with emergency locking retractor
function. Seat belts have automatic locking feature. Locking
feature is activated when the seat belt quickly pulled entirely
from the retractor. Locking feature prevents seat belt pulled out
by more than allowed retractor position. It is recommended to
use self-locking function to retain the child seat. When
completely roll back seat belt to the retractor, the feature is
canceled. Canceling the locking feature, seat belts are
unlocked. Canceling the locking feature, seat belts can be
pulled from the retractor. The vehicle is also equipped with the
airbag
system.
Refer
to
"Airbag
System"
in
.
Seat Belt Warning Lamp
Driver seat belt and passenger seat belt warning lamps are
located in instrument cluster and multi-instrument display to
remind driver and passenger to tighten their seat belts.
Child Seat Protection System
Warning!
NEVER use a rear-facing child restraint in the front seat
of this vehicle. If a forward-facing child restraint is
suitable for your child, ALWAYS move the front
passenger seat as far back as it will go and then install
the child restraint. Be sure the child restraint position
does not conict with any additional requirements
provided by the manufacturer. For more information.
Refer to the vehicle owners manual and the instruction
that came with the child restraint.
The child seat may only be used in a forward facing seating
location. The child seat should be installed and secured
according to the manufacturer’s directions. If the child seat has
a top strap, the seat will need to be anchored. Passengers
should not be allowed to sit at locations where the seat belts
are being used to secure the child seat.
9-44
Pretension Seat Belt System
Safety Protection Device
9.3.3 System Working Principle
9.3.3.1 System Working Principle
Front Seat Belt System
Front seat belt system includes the driver and passenger seat
belt pre-tensioner retractor, passenger recognition sensors, as
well as two front seats safety switches.
Passenger recognition sensor is used to detect whether the
passenger seat is occupied. If it is detected to be empty, the
passenger seat belt warning lamp will go off. Two front seat belt
switches are located in the seat locks for seat belt warning lamp
and buzzer control.
1. Driver Seat Belt Warning Lamp
When the ignition switch is at ON, if the driver seat belt is
not tightened, airbag control module detects the driver seat
belt status and send signals to the instrument cluster
through the CAN bus. Instrument cluster driver seat belt
warning lamp flashes and buzzer sounded 4 s to remind
driver to wear seatbelt.
2. Passenger Seat Belt Warning Lamp
When the ignition switch is at ON, the passenger
recognition sensor detects whether the passenger seat is
occupied and send signals to the airbag control module.
Airbag control module tests seat belt status and send a
signal to the instrument cluster, which sends a signal to
request to light or turn off the passenger seat belt warning
lamp.
Rear Seat Belt System
Rear seat belt system includes the following components:
–
The center rear seat belt retractor is located under the rear
shelf trim panel and is attached to the rear shelf body panel.
–
The center rear seat belt buckle and the outer seat belt
buckle are located in the center of the seat cushion and they
are attached to the rear oor pan.
Safety Protection Device
Pretension Seat Belt System
9-45
9.3.4 Component Locator
9.3.4.1 Component Locator
Passenger Recognition Sensor
FE09-1003b
9-46
Pretension Seat Belt System
Safety Protection Device
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст