Geely EC718, EC718RV, EC715, EC715RV. Manual part — 307

FE06-0072b

4.

Install park brake control mechanism assembly cable
adjuster nut and gasket.

FE06-0066b

5.

Adjust the thead length between to the handle top to the
hexagonal nut according to the record, adjust the brake
control mechanism assembly cable.

6.

Apply the park brake control mechanism.

7.

If necessary, adjust the park brake control mechanism
assembly.

8.

Install the center console.

6.5.5.3 Park Brake Control Mechanism Cable
Assembly Replacement

Removal Procedure:

Warning!

Refer to "Vehicle Lifting Warning" in "Warnings and
Notices".

Brake System

Parking System

6-61

FE06-0066b

1.

Release the park brake control mechanism.

2.

Remove the center console. Refer to

3.3.8.9

Shift Lever

Replacement

.

3.

Disconnect the park brake control mechanism switch
wiring harness connector.

4.

Measure the thead length between to the handle top to
the hexagonal nut and record it.

FE06-0067b

5.

Remove the park brake cable adjustment nut and gasket.

FE06-0068b

6.

Open the park brake control mechanism assembly park
brake cable installation piece, pull out of the park brake
cable.

6-62

Parking System

Brake System

FE06-0073b

7.

Lift and support the vehicle. Refer to

1.3

Lifting and Jacking

the Vehicle

.

8.

Remove the front muffler and the heat shield. Refer to

2.7.6.3

Front Muffler Replacement

.

9.

Disconnect the left and right rear park brake cable from
the adjuster.

FE06-0074b

10. Rotate the cable adjuster, remove the park brake cable

adjuster from the front of the park brake.

FE06-0075b

11. Lower the vehicle and remove the park brake cable from

inside the vehicle.

Brake System

Parking System

6-63

FE06-0076b

12. Lift and support the vehicle.

13. Disconnect the left and right rear park brake cable from

the rear calipers.

FE06-0077b

14. Remove the left and right rear brake cable retaining bolts

and springs.

15. Remove the left and right rear park brake cable.

Installation Procedure:

FE06-0078b

1.

Install the left and right rear park brake cable.

2.

Install the left and right rear brake cable retaining bolts
and springs.

Torque: 9 Nm (Metric) 6.6 lb-ft (US English)

6-64

Parking System

Brake System