Geely EC718, EC718RV, EC715, EC715RV. Manual part — 498
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 498
Yes
System normal
No
Step 5
Check the cigarette lighter ground circuit.
1
2 3
Cigarette Lighter + Lighting Harness
Connector IP37
FE11-6503b
(a)
Disconnect the cigarette lighter wiring harness connector.
(b)
At the same time, measure resistance between the cigarette
lighter wiring harness connector IP37 terminal No.1 and the
ground with a multimeter.
Resistance Standard Value: Less than 1 Ω
Is the resistance specified value?
Yes
No
Step 6
Repair the cigarette lighter ground circuit open.
(a)
Repair the open circuit between the cigarette lighter wiring
harness connector IP37 terminal No.1 and ground.
Confirm the cigarette lighter is working properly.
Yes
System normal
No
Step 7
Replace the cigarette lighter.
(a)
Replace the cigarette lighter. Refer to
Confirm the repair completed.
Next
Step 8
System normal.
Body Electric
Cigarette Lighter
11-505
11.16.5.4 Spare Power Outlet Inoperative
Schematic:
Backup Power Supply
To Ignition Switch
FE11-6507b
Diagnostic Steps:
Step 1
Check the fuse IF9.
IF14
IF2
IF1
IF5
IF7
IF3
IF16
IF27
IF25
IF26
IF28
IF30
IF24
IF20
IF19
IF23
IF18
IF21
IF13
IF12
IF15
IF9
IF10
IF8
F17
F22
M
FE11-6504b
(a)
Check whether the fuse IF9 is blown.
Fuse Rated Current: 15 A
No
11-506
Cigarette Lighter
Body Electric
Yes
Step 2
Check fuse IF9 circuit.
(a)
Check whether there is a short circuit.
(b)
Repair the circuits. Confirm that there are no short circuits.
(c)
Replace with fuses with rated current.
Is the spare power outlet working correctly?
Yes
System normal
No
Step 3
Check the spare power outlet power supply circuit.
Backup Power Supply Harness
Connector IP42
FE11-6505b
(a)
Turn the ignition switch to the ACC file.
(b)
At the same time, measure the spare power outlet wiring
harness connector IP42 terminal No.2 voltage with a
multimeter.
Standard Voltage: 11-14 V
Is the voltage specified value?
Yes
No
Step 4
Repair the spare power outlet power supply circuit open.
Repair
(a)
Repair the open circuit between the spare power outlet
harness connector IP42 terminal No.2 and the fuse IF9.
Confirm the spare power outlet is working properly.
Yes
System normal
No
Step 5
Check the spare power outlet ground circuit.
Body Electric
Cigarette Lighter
11-507
Backup Power Supply Harness
Connector IP42
FE11-6506b
(a)
Disconnect the spare power outlet wiring harness connector.
(b)
At the same time, measure resistance between the the spare
power outlet wiring harness connector IP42 terminal No.1
and the ground with a multimeter.
Resistance Standard Value: Less than 1 Ω
Is the resistance specified value?
Yes
No
Step 6
Repair the spare power outlet ground circuit open.
Repair
(a)
Repair the open circuit between the spare power outlet
harness connector IP42 terminal No.1 and the ground.
Confirm the spare power outlet is working properly.
Yes
System normal
No
Step 7
Replace the spare power outlet.
(a)
Replace the standby power outlet. Refer to
Confirm the repair completed.
Next
Step 8
System normal.
11-508
Cigarette Lighter
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст