Geely EC718, EC718RV, EC715, EC715RV. Manual part — 400
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 400
Yes
System normal
No
Step 4
Check the fuse IF19 circuit.
IF14
IF2
IF1
IF5
IF7
IF3
IF16
IF27
IF25
IF26
IF28
IF30
IF24
IF20
IF19
IF23
IF18
IF21
IF13
IF12
IF15
IF9
IF10
IF8
F17
F22
M
FE11-5357b
(a)
Check whether the fuse IF19 is blown.
Fuse Rating: 15A
Is the fuse blown?
No
Yes
Step 5
Repair the fuse IF19 circuit.
(a)
Check the fuse IF19 for short circuit.
(b)
Repair the circuits. Confirm that there are no short circuits.
(c)
Replace with fuses with rated current.
Confirm the rear compartment lamp is working correctly.
Yes
System normal
No
Step 6
Measure rear compartment light switch wiring harness connector SO34 terminal No.1 voltage.
2 1
Rear Compartment Lamp Harness
Connector SO34
FE11-5358b
(a)
Measure the rear compartment lamp switch wiring harness
connector SO34 terminal No.1 voltage.
Standard Voltage: 11-14 V
Is the voltage specified value?
Yes
Body Electric
Lighting System
11-113
No
Step 7
Repair the open circuit between the rear compartment light switch wiring harness connector SO34 terminal
No.1 and fuse IF19.
(a)
Confirm the open circuit between the rear compartment light
switch wiring harness connector SO34 terminal No.1 and
fuse IF19 repair is completed.
Confirm the rear compartment lamp is working correctly.
Yes
System normal
No
Step 8
Test continuity between the rear compartment lamp switch wiring harness connector SO34 terminal No.2
and the rear compartment electrical wiring harness connector SO54 terminal No.3.
2 1
3
2
1
Rear Compartment Lamp Harness
Connector SO34
Rear Compartment Lock Harness
Connector SO54
FE11-5359b
(a)
Remove the rear compartment lamp switch wiring harness
connector and the rear compartment electrical wiring harness
connector.
(b)
Measure resistance between the rear compartment lamp
switch wiring harness connector SO34 terminal No.2 and the
rear compartment electrical wiring harness connector SO54
terminal No.3 with a multimeter.
Standard Resistance: Less than 1 Ω
Is the resistance specified value?
Yes
No
Step 9
Repair the open circuit between the wiring harness connector SO34 and connector SO54.
(a)
Confirm the open circuit between the wiring harness
connector SO34 terminal No.2 and connector SO54 terminal
No.3 repair is completed.
Confirm the rear compartment lamp is working correctly.
Yes
System normal
No
Step 10
Replace the rear compartment motor.
(a)
Replace the rear compartment motor. Refer to
Compartment Lock Assembly Replacement (Sedan)
Confirm the repair completed.
Next
Step 11
System normal.
11-114
Lighting System
Body Electric
11.4.8 Removal and Installation
11.4.8.1 Headlamp Switch Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE11-0212b
1.
Disconnect the battery negative cable. Refer to
.
2.
Turn the steering wheel and remove the upper and lower
steering column shield panel retaining screws.
FE11-0213b
3.
Remove the upper and lower steering column shield
panels.
Body Electric
Lighting System
11-115
FE11-0214b
4.
Disconnect the headlamp switch wiring harness
connector.
FE11-0215b
5.
Press the switch outside tongue to remove the headlamp
switch.
Installation Procedure:
FE11-0216b
1.
Insert the headlamp switch into the switch seating.
11-116
Lighting System
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст