Geely EC718, EC718RV, EC715, EC715RV. Manual part — 529

FE12-0210b

3.

Install the right engine bottom shield retaining screws.

Torque: 10 Nm (Metric) 7.4 lb-ft (US English)

4.

Install the left engine bottom shield retaining screws.

Torque: 10 Nm (Metric) 7.4 lb-ft (US English)

5.

Lower the vehicle.

12.10.1.8

Front

Wheelhouse

Liner

Replacement

Removal Procedure:

FE12-0212b

1.

Remove the front wheel. Refer to

4.4.5.1

Wheel

Replacement

.

2.

Remove the front wheelhouse liner front retaining screws
and clips.

FE12-0213b

3.

Remove the front wheelhouse liner rear retaining screws
and clips and remove the front wheelhouse.

Body, Sheet Metal and Painting

Exterior Trim

12-105

Installation Procedure:

1.

Install the front wheelhouse liner front retaining screws
and clips.

2.

Install the front wheelhouse liner rear retaining screws
and clips.

3.

Tighten the retaining screws.

Torque: 10 Nm (Metric) 7.4 lb-ft (US English)

4.

Install the front wheels.

Note

For rear wheelhouse liner replacement, please refer
to the front wheelhouse liner replacement.

12.10.1.9 Rocker Panel Molding Replacement

Removal Procedure:

FE12-0104b

1.

lift and support the vehicle.

2.

Remove the rocker panel molding front retaining screw.

FE12-0105b

3.

Remove the rocker panel molding middle and rear
retaining screws.

4.

Detach the rocker panel molding bottom retaining clips
and remove the rocker panel molding.

12-106

Exterior Trim

Body, Sheet Metal and Painting

Installation Procedure:

FE12-0106b

1.

Press the rocker panel molding to secure the bottom
retaining clips.

2.

Tighten the rocker panel molding retaining screws.

Torque: 12 Nm (Metric) 8.8 lb-ft (US English)

Note

Two technicians are needed for the rocker panel
molding replacement.

12.10.1.10

Vehicle

Inner

Side

Seal

Replacement

Removal Procedure:

FE12-0214b

1.

Remove the door seals.

FE12-0215b

2.

Remove the door seal strips side and rear retaining clips
and remove the door seal strips.

Body, Sheet Metal and Painting

Exterior Trim

12-107

Installation Procedure:

FE12-0216b

1.

Install the door seal strips side and rear retaining clips.

FE12-0214b

2.

Install the door seals to door seal strip slots.

12-108

Exterior Trim

Body, Sheet Metal and Painting