Geely EC718, EC718RV, EC715, EC715RV. Manual part — 525
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 525
1
3
2
FE12-0068c
1.
Remove the rear compartment floor carpet.
2.
Remove
the
hatchback
seal
(1).
Refer
to
Vehicle Inner Side Seal Replacement
3.
Remove the end panel side clips (2).
4.
Remove the end panel upper clips (3).
1
1
2
2
FE12-0069c
5.
Remove the fire extinguisher mounting bracket retaining
bolt (1).
6.
Remove the retaining clips (2) from the side of the rear
compartment trim panel.
7.
Remove the parcel shelf mounting bracket and the rear
compartment trim panel. Refer to
Installation Procedure:
2
2
1
1
FE12-0070c
1.
Install the parcel shelf mounting bracket and the rear
compartment trim panel.
2.
Install the retaining clips (1) from the side of the rear
compartment trim panel.
3.
Install the fire extinguisher mounting bracket retaining bolt
(2).
Body, Sheet Metal and Painting
Interior Trim
12-89
3
1
2
FE12-0071c
4.
Press the end panel to secure the upper retaining clips
(1).
5.
Attach the end panel side clips (2).
6.
Install the hatchback seal (3).
7.
Install the rear compartment floor carpet.
Note
The removal and installation methods are similar for
both sides of rear compartment trim panel.
12.9.1.11 Passenger Compartment Floor
Carpet Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
Note
To remove the passenger compartment floor carpet,
please use interior trim panel removal tools. Otherwise,
the passenger compartment floor carpet will easily be
scratched.
FE12-0072b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the rear seat cushion. Refer to
3.
Remove the left and right door sill nameplate. Refer to
Left and Right Door Sill Nameplate
4.
Remove the front seat belts retaining bolts from the left
and right center pillar lower trim panels.
5.
Remove the left and right center pillar lower trim panels.
Refer to
Center Pillar Trim Panel Replacement
.
6.
Remove the left and right front seats. Refer to
Front Electric Seat Replacement
7.
Remove the center console. Refer to
8.
Remove the passenger compartment floor carpet.
12-90
Interior Trim
Body, Sheet Metal and Painting
Installation Procedure:
FE12-0072b
1.
Install the passenger compartment floor carpet.
2.
Install the center console.
3.
Install the left and right front seats.
4.
Install the left and right center pillar lower trim panels.
5.
Install the left and right front door sill nameplate.
6.
Install the front seat belts retaining bolts to the left and
right center pillar lower trim panels.
7.
Install the left and right rear door sill nameplate.
8.
Install the rear seat cushion.
9.
Connect the battery negative cable.
12.9.1.12 Front Side Door Trim Panel
Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
1
3
3
3
1
2
4
5
FE12-0074b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the front side door trim panel corner ornament
retaining clip (2) and remove the corner ornament.
3.
Remove the front side door trim panel retaining screws
(3).
4.
Detach the front side door trim panel retaining clips (4).
5.
Disconnect the front side door trim panel lamp connector,
the front door window switch connector and the tweeter
connector and remove the front side door trim panel (5).
Body, Sheet Metal and Painting
Interior Trim
12-91
Installation Procedure:
5
3
3
3
4
2
FE12-0075b
1.
Connect the front side door trim panel lamp connector, the
front door window switch connector and the tweeter
connector.
2.
Press the front side door trim panel to secure the retaining
clips (2).
3.
Install the front side door trim panel retaining screws (3).
Torque: 3.5 Nm (Metric) 2.6 lb-ft (US English)
4.
Press the front side door trim panel corner ornament to
secure the corner ornament retaining clip (4).
Note
The replacement of the left and right front door trim
panels are similar.
12.9.1.13 Rear Side Door Trim Panel
Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
1
2
2
2
3
FE12-0076b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the rear side door trim panel retaining screws (2).
3.
Detach the rear side door trim panel retaining clips (3),
disconnect the wiring harness connectors and remove the
rear side door trim panel.
12-92
Interior Trim
Body, Sheet Metal and Painting
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст