Geely EC718, EC718RV, EC715, EC715RV. Manual part — 245
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 245
FE13-0217b
1.
Disconnect the battery negative cable. Refer to
2.
Lift the vehicle.
3.
Remove the engine bottom shield. Refer to
and Right Engine Bottom Shield Replacement
.
4.
Remove the transmission assembly. Refer to
Transmission Assembly Replacement
.
5.
Remove the pilot bearing from the transmission input
shaft.
FE03-0218b
6.
Separate and remove the fork.
Installation Procedure:
FE03-0219b
1.
Install the fork to the dust cover.
Transmission / Drive Axle
Clutch System
3-23
FE13-0220b
2.
Install the pilot bearing to the transmission input shaft.
3.
Install the transmission assembly.
4.
Install the engine bottom shield.
5.
Lower the vehicle.
6.
Connect the battery negative cable.
3.2.6.7 Clutch Slave Cylinder Replacement
Removal Procedure:
FE03-0221b
1.
Remove the bolts and Disconnect the tube from the clutch
slave cylinder.
FE03-0222b
2.
Remove clutch slave cylinder bolts and the clutch slave
cylinder.
3-24
Clutch System
Transmission / Drive Axle
Installation Procedure:
FE03-0223b
1.
Connect the clutch slave cylinder to the transmission
housing and tighten the bolts.
Torque: 20 Nm (Metric) 14.8 lb-ft (US English)
FE03-0224b
2.
Connect the clutch fluid tube to the clutch slave cylinder
and tighten the bolts.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
3.
Apply grease to the rod joints and be careful not to make
the dust cover dirty.
4.
Hydraulic clutch bleeding. Refer to
5.
Adjust the clutch pedal. Refer to
.
6.
Fill brake fluid to the fluid reservoir Maximum mark.
Transmission / Drive Axle
Clutch System
3-25
3.2.7 Special Tools and Equipment
3.2.7.1 Special Tools List
Serial
Number
Illustration
Tool Number
Description
1
FE01-2021b
GT301-017
Clutch Installation Tool
3-26
Clutch System
Transmission / Drive Axle
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст