Geely EC718, EC718RV, EC715, EC715RV. Manual part — 331
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 331
Symptoms
Suspected Parts
Measures / Refer to
Steering Column Assembly
Noise
1. Mechanical steering column assembly
mounting bolt (Loose / Damaged)
Tighten or replace the bolt. Refer to
Mechanical Steering Column Assembly
.
2. Airbag clock spring (Loose / Damaged)
Install or replace the clock spring. Refer to
.
3. Mechanical steering column assembly system
connecting bolt (Loose / Damaged)
Tighten or replace the bolts. Refer
to "
.
4. Mechanical steering column assembly shaft /
bearing (Worn)
Replace the mechanical steering column
assembly. Refer to
Steering Column Assembly
Noise
5. Upper and lower intermediate shaft universal
joints (Lack of lubrication / Worn)
Apply grease or replace the upper and lower
intermediate shaft. Refer to
Steering Column Assembly Replacement
Adjustable Steering Column
Tilt Function Abnormal
1. Steering column tilt locking block (Jam)
Clean impurities and rust, lubricate or replace the
steering column locking block. Refer to
Mechanical Steering Column Assembly
.
2. Adjustable steering column tilt handle (Loose /
Damaged)
Tighten the nuts or replace the handle. Refer to
Mechanical Steering Column Assembly
.
3. Steering column tilt spring (Weak / Damaged)
Install or replace the spring. Refer to
Mechanical Steering Column Assembly
.
4. Mechanical steering column assembly tilt pivot
(Rusty / Damaged)
Remove rust, lubricate or replace the mechanical
steering column assembly. Refer to
Mechanical Steering Column Assembly
.
Mechanical Steering
Column Assembly Hard to
Lock / Unable to Lock
1. Ignition switch mounting bolt (Loose /
Damaged)
Tighten or replace the installed bolt.
2. Ignition switch lock (Stagnating / Damaged)
Remove rust, lubricate or replace the ignition
switch.
3. Ignition switch lock pin (Broken / Damaged)
Replace the ignition switch.
4. Mechanical steering column assembly internal
axle (Damaged)
Replace the mechanical steering column
assembly. Refer to
Mechanical Steering
Column Assembly Hard to
Unlock / Unable to Unlock
1. Ignition switch lock (Stagnating / Damaged)
Remove rust, lubricate or replace the ignition
switch.
2. Ignition key (Worn / Damaged)
Replace the ignition switch.
Steering System
Steering Wheel and Steering Column
7-43
7.3.6 Removal and Installation
7.3.6.1 Steering Wheel Free Space Check
Maximum Clearance
FE07-1025b
1.
Park the vehicle, straighten the front wheels.
Note
This vehicle steering wheel free space can not be
adjusted. When the upper and lower intermediate
shaft universal joints are normal, replace the power
steering gear assembly.
2.
Turn the steering wheel while feel whether there is free
space. If there is free space, replace the upper and lower
intermediate shafts.
Maximum free-space:30 mm (1.18 in)
7.3.6.2 Upper and Lower Intermediate Shaft
Universal Joints Inspection
FE07-1026b
1.
Fix one end of the upper and lower intermediate shaft
universal joints, rotate the other end clockwise and
counterclockwise.
2.
Check whether it feels any movement. If there is any
movement, replace the upper and lower intermediate
shafts.
7.3.6.3 Steering Wheel Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices" .
Note
Before operation, straighten the front wheels and lock
the steering wheel.
7-44
Steering Wheel and Steering Column
Steering System
FE07-0001b
1.
Remove the battery negative cable. Refer to
.
2.
Remove the driver front airbag. Refer to
FE07-0002b
3.
Remove the steering wheel retaining nut.
4.
Remove the steering wheel.
Installation Procedure:
FE07-0003b
1.
Straighten the front wheels, install the steering wheel.
2.
Install the steering wheel retaining nut.
Torque: 45 Nm (Metric) 33.3 lb-ft (US English)
3.
Install the driver front airbag.
Steering System
Steering Wheel and Steering Column
7-45
7.3.6.4 Mechanical Steering Column Assembly
Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices" .
FE07-0004b
1.
Turn the steering wheel, so that the front wheels are
straight ahead.
2.
Disconnect the battery negative cable. Refer to
.
Note
Disconnect the battery negative cable and wait at
least 90s, prevent the airbag and seat belt pre-
tensioner being activated.
3.
Remove the steering wheel. Refer to
4.
Remove the mechanical steering column assembly upper
and lower shield screws.
FE07-0005b
5.
Remove the mechanical steering column assembly upper
and lower shield panels.
6.
Remove the clock spring.
7.
Remove
the
headlamp
switch.
Refer
to
.
8.
Remove the wiper and washer switch. Refer to
Wiper and Washer Switch Replacement
.
9.
Remove the instrument panel side panel and lower panel.
Refer to
10. Remove the mechanical steering column assembly
bracket retaining blots.
7-46
Steering Wheel and Steering Column
Steering System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст