Geely EC718, EC718RV, EC715, EC715RV. Manual part — 284
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 284
Aluminum Wheels
Radial Run Out: 0.8 mm (0.03 in)
Face Run Out: 0.8 mm (0.03 in)
Steel and Aluminum Wheels
Free Radial Run Out: 1.5 mm (0.06 in)
4.4.4.7 Tire Abnormal Wear Diagnostic
There are many reasons for abnormal and premature tire wear, including the inflation pressure is incorrect, no regular tire rotation,
bad driving habits or the wheel alignment is incorrect. If the tire wear and there is a need to re-adjust the wheel position, as long as
within the specifications, make sure to adjust the toe as close to zero as possible.
If there are following conditions, rotate tires:
A. Front tire wear is different from the rear tire.
B. Left front and right front tire wear is different.
C. Left rear and right rear tire wear is different.
If there are following conditions, check the wheel alignment:
A. Left front and right front tire wear is different.
B. Any front tire uneven tread wear.
C. Front tire tread has feather scratches.
Several typical tire wear situations are shown as following:
1. Eccentric Worn
FE04-1016b
Reasons:
A. Axles, bearings and other rotating parts malfunction.
B. Braking system.
C. Emergency start, emergency braking.
D. Uneven wheel weight center.
E. Tire and wheel rim sizes do not match.
Suspension System
Wheels and Tires
4-65
2. Sidewall Feather Worn Pattern
FE04-1017b
Reasons:
A. Toe value is incorrect.
3. Abnormal Wear and Tear:
FE04-1018b
Reasons:
A. Camber is incorrect.
B. Toe value is incorrect.
4-66
Wheels and Tires
Suspension System
4. Abnormal Wear and Tear:
FE04-1019b
Reasons:
A. Dynamic balance is incorrect.
B. Four wheel position is incorrect.
4.4.4.8 Excessive Tire Wear Diagnostic
Step 1
Check whether the wheel positioning is normal?
No
Adjust the wheel positioning.
Yes
Step 2
Access to the vehicle maintenance records, should tire rotation be carried out? Have tires been rotated as
specified?
No
Rotate tires. Refer to the
Yes
Step 3
Check whether the tire balance is normal, tire pressure is normal?
No
Adjust the tire pressure to the standard value.
Carry out the tire balancing.
Yes
Step 4
No overload situation.
No
Explain to the user the importance of
maintaining a reasonable load.
Yes
Step 5
Check whether the coil spring is working properly?
Suspension System
Wheels and Tires
4-67
No
Replace the coil spring. Refer to
Shock Absorber Components and Spring
Replacement
Yes
Step 6
Check whether the strut assembly is working properly?
No
Replace the faulty component.
Yes
Step 7
Check whether the lower control arm is working properly? (wear, loosen, etc.)
No
Replace the lower control arm. Refer to
Yes
Step 8
Check whether the wheel bearing is working properly? (wear, loose, etc.)
No
Replace the wheel bearing. Refer to
Yes
Step 9
Check whether the lower control arm ball joint and the steering tie rod ball joint are working properly? (Wear,
Loose, etc.)
No
Tighten the nuts. If necessary, replace the the
lower control arm ball joint and the steering tie
rod ball joint.
Yes
Step 10
Check whether the wheel run out is normal? Refer to
No
Reassemble the tires. If necessary, replace
the tires or wheels.
Yes
Step 11
Confirm that failure has been ruled out.
4.4.4.9 Vehicle Waddle Diagnostic
Step 1
Check whether the tire balance is normal, tire pressure is normal?
No
Adjust the tire pressure to the standard value,
carry out the tire balancing.
4-68
Wheels and Tires
Suspension System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст