Geely EC718, EC718RV, EC715, EC715RV. Manual part — 156
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 156
2.10.8.3 Ignition Coil Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
FE02-0388b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the hood. Refer to
3.
Disconnect cylinder No.2 and No.3 ignition coil harness
connectors.
FE02-0389b
4.
Disconnect cylinder No.1 and No.4 ignition coil harness
connectors.
FE02-0390b
5.
Disconnect the cylinder No.3 high pressure damping line.
Engine
Ignition System JL4G18-D
2-539
FE02-0391b
6.
Disconnect the cylinder No.1 high pressure damping line.
FE02-0392b
7.
Remove cylinder No.2 and No.3 ignition coil retaining
bolts.
FE02-0393b
8.
Remove cylinder No.2 and No.3 ignition coils.
2-540
Ignition System JL4G18-D
Engine
FE02-0394b
9.
Remove cylinder No.1 and No.4 ignition coil retaining
bolts.
FE02-0395b
10. Remove cylinder No.1 and No.4 ignition coils.
Installation Procedure:
FE02-0396b
1.
Install cylinder No.1 and No.4 ignition coils, and tighten
the retaining bolts.
Torque: 9 Nm (Metric) 6.7 lb-ft (US English)
Engine
Ignition System JL4G18-D
2-541
FE02-0397b
2.
Install cylinder No.2 and No.3 ignition coils, and tighten
the retaining bolts.
Torque: 9 Nm (Metric) 6.7 lb-ft (US English)
FE02-0391b
3.
Connect the cylinder No.1 high pressure damping line.
Note
Confirm the high-pressure damping line is installed
in place, otherwise it will cause a secondary arch
and engine malfunction.
FE02-0390b
4.
Connect the cylinder No.3 high pressure damping line.
Note
Confirm the high-pressure damping line is installed
in place, otherwise it will cause a secondary arch
and engine malfunction.
2-542
Ignition System JL4G18-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст