Scania 16 litre engine. Work Description — part 33
0150w13b.mkr
©
129
Engine suspension
Renewing the vibration
insulator
Special tools
1
Remove the cable duct to the engine speed
sensor on the flywheel.
2
Remove the exhaust brake and exhaust
bellows after the turbocharger.
3
Screw on lifting eyes 99 398 to the engine
using flange bolt M12x30.
4
Disconnect the filter housing for the
crankcase ventilation and place to one side
so that it is free from the lifting chain.
5
Fasten the lifting chain 99 094 to the rear
lifting eyes.
6
Fasten the lever block 587 308 to the front
lifting eye.
7
Undo the bolts holding together the
vibration insulator and the bracket.
8
Lift up the engine.
9
Remove the vibration insulator.
10 Fit a new vibration insulator.
Number
Designation
Illustration
99 398
Lifting eyes
98 094
Lifting chain
587 308
Lever block
99 398
114 638
98 094
109 836
114 070
114 718
99 398
Engine suspension
130
©
0150w13b.mkr
11 Lower the engine and tighten the bolts.
12 Remove the lifting chain and lever block.
13 Fit the filter housing for the crankcase
ventilation.
14 Remove the lifting eyes.
15 Fit the exhaust brake and exhaust bellows
after the turbocharger.
16 Fit the cable duct to the engine speed sensor
on the flywheel.
Engine suspension
0150w13b.mkr
©
131
Renewing the engine bracket fitted to the engine
Tightening torque
Special tools
1
Remove the cable duct to the engine speed
sensor on the flywheel.
2
Remove the exhaust brake and exhaust
bellows after the turbocharger.
3
Screw on lifting eyes 99 398 to the engine
using flange bolt M12x30.
4
Disconnect the filter housing for the
crankcase ventilation and place to one side
so that it is free from the lifting chain.
5
Fasten the lifting chain 99 094 to the rear
lifting eyes.
6
Fasten the lever block 587 308 to the front
lifting eye.
7
Undo the bolts holding together the
vibration insulator and the bracket.
8
Lift up the engine.
9
Undo the bolts and remove the engine
bracket from the engine.
Screw for engine bracket
130 Nm + 90
°
Number
Designation
Illustration
99 398
Lifting eyes
98 094
Lifting chain
587 308
Lever block
99 398
114 638
98 094
109 836
114 070
114 718
99 398
Engine suspension
132
©
0150w13b.mkr
10 Fit a new bracket and torque tighten the
bolts to the engine to 130 Nm +90°.
11 Lower the engine and fit it. Tighten the bolts
to the vibration insulator.
12 Remove the lifting chain and lever block.
13 Fit the filter housing for the crankcase
ventilation.
14 Remove the lifting eyes.
15 Fit the exhaust brake and exhaust bellows
after the turbocharger.
16 Fit the cable duct to the engine speed sensor
on the flywheel.
Engine suspension
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст