Lexus LC500 (2022 year). Manual in english — page 4
80
1-5. Theft deterrent system
Q
Setting
Close the doors, trunk and hood, and
lock both side doors using the entry
function or wireless remote control.
The system will be set automatically
after 30 seconds.
The indicator light changes from being on
to flashing when the system is set.
Q
Canceling or stopping
Do one of the following to deactivate
or stop the alarm:
Unlock the doors or open the trunk
using the entry function or wireless
remote control.
Start the engine <hybrid system>.
(The alarm will be deactivated or
stopped after a few seconds.)
Q
System maintenance
The vehicle has a maintenance-free type
alarm system.
Q
Triggering of the alarm
The alarm may be triggered in the following
situations:
(Stopping the alarm deactivates the alarm
system.)
O
The doors are unlocked using the
mechanical key.
O
A person inside the vehicle opens a door,
the trunk or hood, or unlocks the vehicle
using a door lock switch.
O
The 12-volt battery is recharged or
replaced when the vehicle is locked.
(
P.401)
Q
Alarm-operated door lock
In the following cases, depending on the sit-
uation, the door may automatically lock to
prevent improper entry into the vehicle:
O
When a person remaining in the vehicle
unlocks the door and the alarm is acti-
vated.
O
While the alarm is activated, a person
remaining in the vehicle unlocks the door.
O
When recharging or replacing the 12-
volt battery
Q
Customization
The alarm can be set to deactivate when the
mechanical key is used to unlock. (Custom-
izable features:
P.435)
81
1
1-5. Theft deterrent system
For
sa
fe
ty
an
d s
ec
uri
ty
Q
The intrusion sensor and tilt sensor
detection
The intrusion sensor detects intrud-
ers or movement in the vehicle.
The tilt sensor detects changes in
vehicle inclination, such as when the
vehicle is towed away.
This system is designed to deter and
prevent vehicle theft but does not
guarantee absolute security against all
intrusions.
Q
Setting the intrusion sensor and tilt
sensor
The intrusion sensor and tilt sensor will
be set automatically when the alarm is
set. (
P.80)
Q
Canceling the intrusion sensor and
tilt sensor
If you are leaving pets or other moving
things inside the vehicle, make sure to
disable the intrusion sensor and tilt
sensor before setting the alarm, as they
will respond to movement inside the
vehicle.
1
Turn the engine switch <power
switch> off.
2
Press the intrusion sensor and tilt
sensor cancel switch.
Press the switch again to re-enable the
intrusion sensor and tilt sensor.
Each time the intrusion sensor and tilt sen-
sor are canceled/set, a message will be
shown on the multi-information display in
the instrument cluster.
Q
Canceling and automatic re-enabling of
the intrusion sensor and tilt sensor
O
The alarm will still be set even when the
intrusion sensor and tilt sensor are can-
celed.
O
After the intrusion sensor and tilt sensor
are canceled, pressing the engine switch
<power switch> or unlocking the doors
using the entry function or wireless
remote control will re-enable the intru-
sion sensor and tilt sensor.
O
The intrusion sensor and tilt sensor will
automatically be re-enabled when the
alarm system is deactivated.
Q
Intrusion sensor detection consider-
ations
The sensor may trigger the alarm in the fol-
lowing situations:
O
People or pets are in the vehicle.
O
A window is open.
In this case, the sensor may detect the fol-
NOTICE
Q
To ensure the system operates cor-
rectly
Do not modify or remove the system. If
modified or removed, the proper opera-
tion of the system cannot be guaranteed.
Intrusion sensor and tilt sensor
82
1-5. Theft deterrent system
lowing:
• Wind or the movement of objects such as
leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices
such as the intrusion sensors of other
vehicles
• The movement of people outside the
vehicle
O
Unstable items, such as dangling acces-
sories or clothes hanging on the coat
hooks, are in the vehicle.
O
The vehicle is parked in a place where
extreme vibrations or noises occur, such
as in a parking garage.
O
Ice or snow is removed from the vehicle,
causing the vehicle to receive repeated
impacts or vibrations.
O
The vehicle is inside an automatic or
high-pressure car wash.
O
The vehicle experiences impacts, such as
hail, lightning strikes, and other kinds of
repeated impacts or vibrations.
Q
Tilt sensor detection considerations
The sensor may trigger the alarm in the fol-
lowing situations:
O
The vehicle is transported by a ferry,
trailer, train, etc.
O
The vehicle is parked in a parking garage.
O
The vehicle is inside a car wash that
moves the vehicle.
O
Any of the tires loses air pressure.
O
The vehicle is jacked up.
O
An earthquake occurs or the road caves
in.
NOTICE
Q
To ensure the intrusion sensor func-
tion correctly
O
To ensure that the sensors operate
properly, do not touch or cover them.
83
1
1-5. Theft deterrent system
For
sa
fe
ty
an
d s
ec
uri
ty
NOTICE
O
Do not spray air fresheners or other
products directly into the sensor holes.
O
Installing accessories other than genu-
ine Lexus parts or leaving objects
between the driver’s seat and front
passenger’s seat may reduce the
detection performance.
2
85
2
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Vehicle status information
and indicators
2-1. Instrument cluster
Warning lights and indicators.
86
Gauges and meters . . . . . .
92
Multi-information display. . ..
96
Head-up display . . . . . . .
103
Energy monitor/consumption
screen . . . . . . . . . . ..
108
86
2-1. Instrument cluster
2-1.Instrument cluster
For the purpose of explanation, the following illustrations display all warning lights
and indicators illuminated.
LC500
LC500h
Warning lights and indicators
The warning lights and indicators on the instrument cluster, center panel and
outside rear view mirrors inform the driver of the status of the vehicle’s various
systems.
Instrument cluster
87
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Warning lights inform the driver of
malfunctions in the indicated vehicle
systems.
*1
: These lights turn on when the engine
switch <power switch> is turned to
IGNITION ON mode <ON mode> to
indicate that a system check is being
performed. They will turn off after the
engine <hybrid system> is started, or
after a few seconds. There may be a
malfunction in a system if a light does
not come on, or turn off. Have the vehi-
cle inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
*2
: This light illuminates on the multi-infor-
mation display.
Warning lights
(red)
Brake system warning light
*1
(
P.371)
Charging system warning
light
*2
(
P.371)
Low engine oil pressure
warning light
*2
(
P.372)
Malfunction indicator lamp
*1
(
P.372)
SRS warning light
*1
(
P.372)
ABS warning light
*1
(
P.373)
(red)
Electric power steering sys-
tem warning light
*1
(
P.373)
(yellow)
Electric power steering sys-
tem warning light
*1
(
P.373)
(Flashes or
illuminates)
(if equipped)
PCS warning light
*1
(
P.373)
(orange)
(if equipped)
LKA indicator
*2
(
P.374)
Slip indicator
*1
(
P.374)
Brake Override System
warning light
*2
(
P.375)/Drive-Start Con-
trol warning light
*2
(
P.375)
Brake hold operated indica-
tor
*1, 3
(
P.375)
Parking brake indicator
*3
(
P.375)
(yellow)
Brake system warning light
*1
(
P.376)
Low fuel level warning light
(
P.376)
Driver’s and front passen-
ger’s seat belt reminder light
(
P.376)
Rear passengers’ seat belt
reminder lights
*4
(
P.376)
Master warning light
*1
(
P.377)
Tire pressure warning light
*1,
3
(
P.377)
High coolant temperature
warning light
*2
(
P.377)
(if equipped)
Hybrid system overheat
warning light
*2
(
P.378)
88
2-1. Instrument cluster
*3
: The light flashes to indicate a malfunc-
tion.
*4
: This light illuminates on the center
panel.
The indicators inform the driver of the
operating state of the vehicle’s various
systems.
WARNING
Q
If a safety system warning light does
not come on
Should a safety system light such as the
ABS and SRS warning light not come on
when you start the engine <hybrid sys-
tem>, this could mean that these systems
are not available to help protect you in an
accident, which could result in death or
serious injury. Have the vehicle
inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer immediately if this
occurs.
Indicators
Turn signal indicator (
P.182)
Tail light indicator (
P.188)
Headlight high beam indicator
(
P.189)
(if equipped)
AHB indicator
*1
(
P.190)
Rear fog light indicator
(
P.193)
(if equipped)
Gear Shift Indicator
*2
(
P.173, 181)
Cruise control indicator
*2
(
P.225, 235)
(if equipped)
Dynamic radar cruise control
indicator
*2
(
P.225)
Cruise control “SET” indica-
tor
*2
(
P.225, 235)
(white)
(if equipped)
LKA indicator
*2
(
P.213)
(green)
(if equipped)
LKA indicator
*2
(
P.213)
(orange)
(if equipped)
LKA indicator
*2, 3
(
P.213)
Lexus parking assist-sensor
indicator (
P.239)
Slip indicator
*1, 3
(
P.262)
VSC OFF indicator
*1
(
P.263)
(if equipped)
PCS warning light
*1, 4
(
P.205)
(if equipped)
BSM (Blind Spot Monitor) out-
side rear view mirror indica-
tors
*5, 6
(
P.246)
(if equipped)
BSM (Blind Spot Monitor) indi-
cator (
P.246)
(if equipped)
RCTA (Rear Crossing Traffic
Alert) indicator (
P.246)
Brake hold standby indicator
*1
(
P.185)
Brake hold operated indica-
tor
*1
(
P.185)
89
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
*1
: These lights turn on when the engine
switch <power switch> is turned to
IGNITION ON mode <ON mode> to
indicate that a system check is being
performed. They will turn off after the
engine <hybrid system> is started, or
after a few seconds. There may be a
malfunction in a system if a light does
not come on, or turn off. Have the vehi-
cle inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
*2
: This light illuminates on the multi-infor-
mation display.
*3
: The light flashes to indicate that the sys-
tem is operating.
*4
: The light comes on when the system is
turned off.
*5
: In order to confirm operation, the BSM
outside rear view mirror indicators illu-
minate in the following situations:
When the engine switch <power
switch> is turned to IGNITION ON
mode <ON mode> while the BSM main
switch is turned on.
When the BSM main switch is turned
on while the engine switch <power
switch> is in IGNITION ON mode
<ON mode>.
If the system is functioning correctly, the
BSM outside rear view mirror indica-
tors will turn off after a few seconds.
If the BSM outside rear view mirror
indicators do not illuminate or do not
turn off, there may be a malfunction in
the system.
Security indicator
*7
(
P.77,
79)
Smart entry & start system indi-
cator
*2
(
P.157)
(if equipped)
“READY” indicator (
P.161)
Low outside temperature indi-
cator
*2, 8
(
P.92)
(if equipped)
Eco Driving Indicator Light
*1
(
P.90)
(if equipped)
EV indicator (
P.70)
Parking brake indicator
(
P.183)
Snow mode indicator (
P.172,
179)
(if equipped)
EV drive mode indicator
(
P.165)
“Normal” indicator
*2
(
P.238)
“Eco” indicator
*2
(
P.238)
“Sport S” indicator
*2
(
P.238)
“Sport S+” indicator
*2
(
P.238)
“Comfort” indicator
*2
(
P.238)
“Custom” indicator
*2
(
P.238)
“PASSENGER AIR
BAG” indicator
*7
(
P.50)
90
2-1. Instrument cluster
If this occurs, have the vehicle inspected
by any authorized Lexus retailer or
Lexus authorized repairer, or any reli-
able repairer.
*6
: This light illuminates on the outside rear
view mirrors.
*7
: This light illuminates on the center
panel.
*8
: When the outside temperature is
approximately 3°C (37°F) or lower,
the indicator will flash for approximately
10 seconds, then stay on.
Q
Eco Driving Indicator (LC500)
Eco Driving Indicator Light
During Eco-friendly acceleration (Eco driv-
ing), the Eco Driving Indicator Light will
turn on. When the acceleration exceeds the
Zone of Eco driving, or when the vehicle is
stopped, the light turns off.
Eco Driving Indicator can be enabled on
the multi-information display. (
P.96)
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with cur-
rent Eco driving ratio based on accelera-
tion.
When the driving mode is Normal mode or
Comfort mode, switch the display to the
side position. (
P.95)
Eco driving ratio based on acceleration
The part that exceeds the Zone of Eco driv-
ing illuminates in white.
Zone of Eco driving
Eco Driving Indicator will not operate
under the following conditions:
O
The shift position is in any position other
than D.
O
A paddle shift switch is operated.
O
The driving mode is SPORT S mode or
SPORT S+ mode.
O
The vehicle speed is approximately 130
km/h (80 mph) or higher.
Q
Hybrid System Indicator (LC500h)
Charge area
Shows regeneration
*
status. Regenerated
energy will be used to charge the hybrid
battery (traction battery).
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically stop
A
B
C
D
A
B
91
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
and restart under various conditions.
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
By keeping the indicator needle within Eco
area, more Eco-friendly driving can be
achieved.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving
etc.)
In the following situation, the Hybrid System
Indicator does not operate.
O
The shift position is in other than D or M.
O
The driving mode is other than Eco
mode.
*
: When used in this manual, “regeneration”
refers to the conversion of energy cre-
ated by the movement of the vehicle into
electrical energy.
Q
Motor power display (LC500h)
Motor power area
Shows that the power of the motor assists
the engine.
Charge area
Shows regeneration
*
status. Regenerated
energy will be used to charge the hybrid
battery (traction battery).
*
: When used in this manual, “regeneration”
refers to the conversion of energy cre-
ated by the movement of the vehicle into
electrical energy.
C
D
A
B
92
2-1. Instrument cluster
LC500
LC500h
The units used on the meters may differ depending on the target region.
Engine oil temperature gauge/Eco Driving Indicator (LC500)
Displays the engine oil temperature or Eco Driving Indicator (
P.90)
Gauges and meters
When the main meter is in the side position, some of the meter displays and the
gauge layout will be changed.
Meter display
A
93
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Outside temperature
Displays the outside temperature within the range of -40°C (-40°F) to 50°C (122°F)
Low outside temperature indicator comes on when the ambient temperature is 3°C
(37°F) or lower
Tachometer
Displays the engine speed in revolutions per minute
Speedometer
Shift position/shift range/gear position (
P.167, 174)
Shift position indicator (
P.168, 176)
Clock
Time displayed is linked to the analog clock on the instrument panel. (
P.298)
Engine coolant temperature gauge
Displays the engine coolant temperature
If the engine coolant temperature gauge indicator enters the red zone, a buzzer sounds
and the high coolant temperature warning light comes on
Odometer and trip meter display
Odometer:
Displays the total distance the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset
Trip meters “A” and “B” can be used to record and display different distances inde-
pendently
Fuel gauge
Displays the quantity of fuel remaining in the tank
Multi-information display
Presents the driver with a variety of vehicle data (
P.96)
Displays warning messages in case of a malfunction (
P.381)
Motor power display/Hybrid System Indicator (LC500h)
Displays the motor power display (
P.91) or Hybrid System Indicator (
P.90)
Q
Speed warning
When the vehicle reaches the set
speed, the speed warning display will
flash.
This setting can be enabled on the
multi-information display. (
P.96)
Always observe the legal speed limit when
driving on public roads.
Q
Rev indicator
When the engine reaches a set speed
B
C
D
E
F
G
H
I
J
K
L
94
2-1. Instrument cluster
or the red zone, a ring-shaped indica-
tor will be displayed on the tachome-
ter.
The indicators will be displayed in
amber (
) when the engine speed
reaches a set speed, and in red (
)
when the engine speed reaches the
red zone. This setting can be enabled
on the multi-information display.
(
P.101)
Q
Rev peak
When the engine speed reaches or
exceeds the following, an afterimage of
the tachometer will be displayed at the
highest engine speed for approxi-
mately 1 second.
LC500: 3600 r/min
LC500h: 4000 r/min
Q
The meters and display illuminate when
The engine switch <power switch> is in
IGNITION ON mode <ON mode>.
Q
Variable red zone (LC500)
To help protect the engine, the engine
speed is controlled by starting the red zone
of the tachometer at different engine
speeds ranging from 3700 r/min to 7300
r/min depending on the engine coolant
temperature.
Before driving under extremely high load
conditions, make sure to sufficiently warm
up the engine.
Q
Instrument panel brightness adjustment
The brightness of the instrument panel
lights is automatically adjusted based on the
light sensor detecting how bright the sur-
roundings are.
Q
Outside temperature display
O
In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change.
• When stopped, or driving at low speeds
(less than 20 km/h [12 mph])
• When the outside temperature has
changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
O
When “- -” or “E” is displayed, the system
may be malfunctioning.
Take your vehicle to any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Q
Pop-up display
O
In some situations, such as when a switch
operation is performed, a pop-up display
will be temporarily displayed on the
multi-information display.
A
B
95
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
O
Some pop-up displays can be set on/off.
(
P.101)
Q
Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
Q
Customization
The meter display can be customized on
the multi-information display. (
P.425)
The odometer and trip meter displays
can be switched. When the trip meter
is displayed, pressing and holding the
button will reset the trip meter.
The brightness of the instrument panel
lights can be adjusted.
1
Darker
2
Brighter
Q
Instrument panel brightness adjustment
The instrument panel brightness levels
when the tail lights are on and off can be
adjusted individually. However, when the
surroundings are bright (daytime, etc.),
turning on the tail lights will not change the
instrument panel brightness.
The display can be switched between
the center and side positions.
NOTICE
Q
To prevent damage to the engine and
its components
O
Do not let the indicator of the tachom-
eter enter the red zone, as it rep-
resents the engine speed range which
exceeds the maximum safe engine
speed.
O
In the following situations, the engine
may be overheating. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (
P.404, 406)
• The engine coolant temperature
gauge is in the red zone (H).
• LC500: The engine oil temperature
gauge is in the red zone (H).
Changing between the odome-
ter and trip meter
Changing the instrument panel
light brightness
Changing the display
96
2-1. Instrument cluster
Q
Display
When the main meter is in the cen-
ter position
Displays various drive information on
the main meter.
Some of the content which are displayed
when the main meter is in the side position
cannot be displayed.
When the main meter is in the side
position
Selecting a menu icon displays a vari-
ety of vehicle data or allows vehicle
settings to be customized.
Q
Menu icons
Multi-information display
Display and menu icons
Drive information (
P.98)
Navigation system-linked dis-
play (if equipped) (
P.100)
Audio system-linked display
(
P.100)
Driving assist system informa-
tion (
P.100)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст