Lexus LC500 (2022 year). Manual in english — page 5
97
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Q
Opening image display
When the engine switch <power switch> is
in ACCESSORY mode or IGNITION ON
mode <ON mode>, the opening image is
displayed on the multi-information display.
While the opening image is being dis-
played, the meter display cannot be
changed even if the drive mode is changed.
When the opening image is finished, the
meter display for the currently selected
mode will be displayed.
Q
When disconnecting and reconnecting
12-volt battery terminals
Record of the maximum G-forces will be
reset.
Q
Liquid crystal display
P.95
The multi-information display is oper-
ated using the meter control switches.
/
: Switch menu
/
: Change displayed con-
tent, scroll up/down the screen and
move the cursor up/down
Press: Enter/Set
Press and hold: Reset
Return to the previous screen and
move the main meter
Call sending/receiving and history
display
Linked with the hands-free system, sending
or receiving call is displayed. For details
Warning message display
(
P.381)
Settings display (
P.100)
WARNING
Q
Caution for use while driving
O
When operating the multi-information
display while driving, pay extra atten-
tion to the safety of the area around
the vehicle.
O
Do not look continuously at the multi-
information display while driving as
you may fail to see pedestrians, objects
on the road, etc. ahead of the vehicle.
Q
The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear num-
ber appearing on the display. This lag
could cause the driver to downshift
again, causing rapid and excessive
engine braking and possibly an accident
resulting in death or injury.
Changing the meter display
A
B
C
D
98
2-1. Instrument cluster
regarding the hands-free system, refer to
“NAVIGATION SYSTEM OWNER’S
MANUAL” or “Navigation and Multime-
dia System Owner’s Manual”.
Q
Content of drive information
Select to display various drive data.
Up to 2 of the following items can be
selected.
Items displayed can be switched by
pressing
or
of the meter con-
trol switches to select
and pressing
or
.
Current fuel consumption
*1
Displays the current rate of fuel consump-
tion
Average fuel economy (after
reset
*2
/after start/after refuel)
*1
Displays the average fuel consumption
since the function was reset, the engine
<hybrid system> was started, and the vehi-
cle was refueled, respectively
Use the displayed average fuel consump-
tion as a reference.
Average speed (after reset
*2
/after
start)
*1
Displays the average vehicle speed since
the function was reset and the engine
<hybrid system> was started, respectively
Elapsed time (after reset
*2
/after
start)
*1
Displays the elapsed time since the func-
tion was reset and the engine <hybrid sys-
tem> was started, respectively
Distance (range/after start)
*1
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining and the distance driven after the
engine <hybrid system> was started
respectively.
• This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
• When only a small amount of fuel is
added to the tank, the display may not be
updated.
When refueling, turn the engine switch
<power switch> off. If the vehicle is refu-
eled without turning the engine switch
<power switch> off, the display may not
be updated.
*1
: Displayed when the item is set in “Drive
Info 1” and “Drive Info 2”.
*2
: The function can be reset by pressing
“OK” of the meter control switches for
longer than 1 second when the item to
reset is displayed.
If there is more than one item that can
be reset, the item selection screen will
appear.
Q
Eco Driving Indicator/engine oil
temperature gauge (LC500)
P.90, 92
Q
Hybrid System Indicator/motor
power display (LC500h)
P.90
Q
Energy monitor (LC500h)
P.108
Q
Tire pressure
P.336
Drive information
99
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Q
Gear positions
Displays the current shift range or gear
position when the shift position is in D
or M.
Q
Units (if equipped)
The units of measure used can be
changed while driving.
Unlike the units setting performed on the
settings display, the units setting per-
formed on the drive information menu can
be changed while driving.
Q
G-force
Displays lateral G-forces on the vehi-
cle
Reading the display
• Normal display
Displays the following on the multi-infor-
mation display
Acceleration G-force on the vehicle
Current G-force value (analyzed value
of front/rear and left/right G-forces)
• Advanced display
Displays the following on the multi-infor-
mation display and main meter
Multi-information display:
Acceleration G-force on the vehicle
Record of the maximum G-forces
Value of the maximum G-force since
display reset (analyzed value of
front/rear and left/right G-forces)
This display is intended for use as a guide-
line. Depending on factors such as the
road surface condition, temperature and
vehicle speed, the display may not show
the actual condition of the vehicle.
Main meter:
G-force direction
Current G-force value (analyzed value
of front/rear and left/right G-forces)
This display is intended for use as a guide-
line. Depending on factors such as the
road surface condition, temperature and
vehicle speed, the display may not show
the actual condition of the vehicle.
Switching the display
A
B
A
B
C
A
B
100
2-1. Instrument cluster
To switch to advanced display, press “OK”.
To return to normal display, press “OK”.
Resetting the record of maximum
G-forces
With the record of maximum G-forces dis-
played, press and hold “OK” to reset the
display.
Peak hold function (advanced dis-
play only)
If lateral G-forces of 0.5 G or greater are
generated, the G-force value displayed on
the main meter will turn yellow and be held
for 3 seconds.
Q
Rear wing position (if equipped)
Displays the raised/retracted state of
the active rear wing
Q
LKA (Lane-Keeping Assist) vehi-
cle sway warning (if equipped)
P.214
Q
Display off
A blank screen is displayed
Select to display the following naviga-
tion system-linked information.
Route guidance
Compass display
Select to enable selection of an audio
source etc. on the meter using the
meter control switches.
Select to display the dynamic radar
cruise control with full-speed range
(
P.225)/LKA (Lane-Keeping
Assist) (
P.213) information, when
the system is used.
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (
P.381)
Select to change the meter display set-
tings.
Q
Language
Select to change the language on the
display.
Q
Units
Select to change the unit of measure
for fuel consumption.
Q
Eco Driving Indicator Light
(LC500)
Select to activate/deactivate the Eco
Driving Indicator Light.
Navigation system-linked dis-
play (if equipped)
Audio system-linked display
Driving assist system informa-
tion
Warning message display
Settings display
101
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Q
EV indicator (LC500h)
Select to activate/deactivate the EV
indicator.
Q
Drive information 1/Drive informa-
tion 2
Select up to 2 items that will be dis-
played on the “Drive Info 1” screen and
“Drive Info 2” screen respectively.
(
P.98)
Q
Pop-up display
Select to set the following pop-up dis-
plays, which may appear in some situa-
tions, on/off.
• Route guidance display of the navi-
gation system-linked system (if
equipped)
• Making call display of the hands-
free phone system
• Audio system operation display
• Instrument panel brightness adjust-
ment display
Q
Ring position memory
Select to change the meter ring posi-
tion when the engine <hybrid system> is
started.
The position before the engine <hybrid
system> is stopped or the center posi-
tion can be selected.
Q
Accent color
Select to change the accent color on
the screen, such as the cursor color.
Q
Rev indicator
Select to set the rev indicator on/off.
When set to on, proceed to select the
engine speed at which the rev indica-
tor will be displayed.
Q
Rev peak
Select to set the rev peak on/off.
Q
Clock
Select to switch between 24-hour dis-
play and 12-hour display.
Q
Initialization
Select to reset the meter display set-
tings.
Q
Suspension of the settings display
In the following situations, operation of the
settings display will be temporarily sus-
pended.
O
When a warning message appears on the
multi-information display
O
When the vehicle begins to move
Q
Customization
The settings can be changed on
of the
multi-information display.
O
Settings of the driving assist systems
(
P.425)
O
Vehicle settings (
P.104, 338, 340,
425)
WARNING
Q
Cautions during setting up the dis-
play
As the engine <hybrid system> needs to
be running <operating> during setting up
the display, ensure that the vehicle is
parked in a place with adequate ventila-
tion. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
102
2-1. Instrument cluster
Displays suggestions to the driver in
the following situations. For some sug-
gestions, a response to a displayed
suggestion can be selected. To select a
response, use the meter control
switches.
The suggestion function can be turned
on/off.
Q
Suggestion to turn on the head-
lights
If the headlight switch is in other than
or
, and the vehicle speed is 5
km/h (3 mph) or higher for a certain
amount of time when the surroundings
are dark, a suggestion message will be
displayed.
Q
Suggestion to close the power win-
dows (linked to windshield wiper
operation)
If the windshield wipers are operated
with a power window open, a sugges-
tion message will be displayed asking if
you wish to close the power windows.
To close all of the power windows,
select “Yes”.
Q
Suggestion to unlock the power
windows
If it is attempt to close the passenger’s
side window using the power window
switch on the driver’s door, a sugges-
tion message will be displayed.
Q
Customization
The suggestion function can be turned
on/off. (Customizable features:
P.425)
NOTICE
Q
While setting up the display
To prevent 12-volt battery discharge,
ensure that the engine is running <hybrid
system is operating> while setting up the
display features.
Suggestion function
103
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
*
: If equipped
Navigation system-linked display
area (if equipped)
Displays the following items, which are
linked to the navigation system:
• Speed limit
• Street name
• Route guidance to destination
• Compass
Driving assist system status display
area
Displays the current shift position, and shift
range/gear position, or the operational
status of the following systems:
• Pre-collision warning (Pre-Collision
System) (
P.205)
• Dynamic radar cruise control with full-
speed range (
P.225) (if equipped)
• LKA (Lane-Keeping Assist) (
P.213)
• Lexus parking assist-sensor (
P.239)
Displayed content is the same as that dis-
played on the multi-information display.
For details, refer to the explanations of
each system.
Vehicle speed display
Information display area (
P.105)
Displays the following items:
• Warning/message
•
/
icon (
P.105)
• Audio system operation status
• Dynamic radar cruise control with full-
speed range status (
P.225) (if
equipped)
• Hands-free system status (
P.105) (if
equipped)
• Eco Driving Indicator/tachometer
(
P.106) (LC500)
• Hybrid System Indicator/motor power
display/tachometer (
P.107)
(LC500h)
HUD (Head-up display) switch
Q
Enabling/Disabling the head-up
display
Pressing the switch turns the head-up
display on/off.
Head-up display
*
The head-up display is linked to the
meters and navigation system and
projects a variety of information in
front of the driver, such as the cur-
rent vehicle speed and route guid-
ance to a set destination.
System components
A
B
Using the head-up display
C
D
E
104
2-1. Instrument cluster
Q
Changing settings of the head-up
display
Select
on the multi-information dis-
play (
P.96) to change the following
settings:
Display brightness/position
Select to adjust the brightness and position
of the head-up display.
Eco Driving Indicator/tachometer
(LC500)
Select to display Eco Driving Indicator,
tachometer or no content.
Hybrid System Indicator/motor
power display/tachometer
(LC500h)
Select to display Hybrid System Indicator,
tachometer or no content.
Motor power display can be displayed
when Hybrid System Indicator is selected
while the driving mode (
P.238
) is other
than the Eco drive mode.
Display content
Select to enable/disable the following
items:
• Route guidance to destination
• Driving assist system status
• Compass
• Audio system operation status
Display angle
Select to adjust the angle of the head-up
display.
Q
Head-up display
O
The head-up display may seem dark and
hard to see when viewed through sun-
glasses, especially polarized sunglasses.
Adjust the brightness of the head-up dis-
play or remove your sunglasses.
O
When the head-up display is turned off, it
will remain off even if the engine switch
<power switch> is turned to ACCES-
SORY mode or IGNITION ON mode
<ON mode> after the engine switch
<power switch> has been turned off.
O
The startup image will be displayed on
the head-up display after the engine
switch <power switch> has been turned to
IGNITION ON mode <ON mode> while
the head-up display switch is set to on.
Q
Display brightness
The brightness of the head-up display can
be adjusted on
of the multi-information
display. Also, it is automatically adjusted
according to the ambient brightness.
Q
Head-up display automatic position
adjustment
If the display position is recorded into mem-
ory, the head-up display will be automati-
cally adjusted to the desired position.
(
P.132)
Q
When the 12-volt battery is discon-
nected
The customize settings of the head-up dis-
play will be reset.
Q
Customization
Settings (e.g. display) can be changed.
(Customizable features:
P.425)
105
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Displays the following items in the
appropriate situation:
Q
Warning/message
Displays the following warning/mes-
sages:
• Master warning message
• Notification message (Dynamic
radar cruise control with full-speed
range)
• Other messages
Q
/
icons
Displays the following multi-informa-
tion display linked icons:
: Master warning icon
Displayed when a warning message is
displayed on the multi-information dis-
play. (
P.381)
: Information icon
Displayed when a suggestion/advice
pop-up display is displayed on the
multi-information display. (
P.102)
Q
Hands-free system status
Displayed when the hands-free system
WARNING
Q
Before using the head-up display
O
Check that the position and brightness
of the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image’s position or
brightness may obstruct the driver’s
view and lead to an accident, resulting
in death or serious injury.
O
Do not continuously look at the head-
up display while driving as you may fail
to see pedestrians, objects on the
road, etc. ahead of the vehicle.
Q
Caution for changing settings of the
head-up display
As the engine needs to be running
<hybrid system needs to be operating>
while changing the settings of the head-
up display, ensure that the vehicle is
parked in a place with adequate ventila-
tion. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
NOTICE
Q
To prevent damage to components
O
Do not place any drinks near the head-
up display projector. If the projector
gets wet, electrical malfunctions may
result.
O
Do not place anything on or put stick-
ers onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
O
Do not touch the inside of the head-up
display projector or thrust sharp edges
or the like into the projector.
Doing so could cause mechanical mal-
functions.
Q
When changing the settings of the
head-up display
To prevent battery discharge, ensure
that the engine is running <hybrid system
is operating> while changing the settings
of the head-up display.
Information display area
106
2-1. Instrument cluster
is operated.
Q
Audio system operation status
Displayed when the audio system is
operated.
Q
Eco Driving Indicator/tachometer
(LC500)
Displays either of Eco Driving Indica-
tor or the tachometer.
Q
Hybrid System Indicator/motor
power display/tachometer
(LC500h)
Displays either of Hybrid System Indi-
cator or the tachometer.
Motor power display can be displayed
when Hybrid System Indicator is
selected while the driving mode
(
P.238) is other than the Eco drive
mode.
Displays the following items which are
linked to the navigation system:
Q
Speed limit
The speed limit on the current road.
Q
Street name
When the navigation system is per-
forming route guidance, the name of
the next street will be displayed on the
top of the display area.
Q
Route guidance to destination
Displayed when the navigation system
is performing route guidance. When
approaching an intersection, an arrow
will be displayed to indicate the sug-
gested direction of travel.
Q
Compass
Displays the direction of travel.
Q
Street name display
Only street names which are included in the
map data will be displayed.
Q
Eco Driving Indicator
Eco Driving Indicator Zone Display
Eco driving ratio based on acceler-
ation
Zone of Eco driving
Displayed content is the same as that dis-
played on the multi-information display
(Eco Driving Indicator). For details, refer to
P.90.
Q
Tachometer
Displays the engine speed in revolu-
tions per minute.
Navigation system-linked dis-
play area (if equipped)
Eco Driving Indicator/tachome-
ter (LC500)
A
B
C
107
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Q
Hybrid System Indicator
Charge area
Hybrid Eco area
Eco area
Power area
Displayed content is the same as that dis-
played on the meter (Hybrid System Indi-
cator). For details, refer to P.90.
Q
Motor power display
Charge area
Power area
Displayed content is the same as that dis-
played on the meter (Motor power dis-
play). For details, refer to P.91.
Motor power display can be displayed
when Hybrid System Indicator is selected
while the driving mode (
P.238) is other
than the Eco drive mode.
Q
Tachometer
Displays the engine speed in revolu-
tions per minute.
Hybrid System Indicator/motor
power display/tachometer
(LC500h)
A
B
C
D
A
B
108
2-1. Instrument cluster
*
: If equipped
Multi-information display
Center Display
Meter control switches
“MENU” button
Touchpad
The energy monitor can be used to
check the vehicle drive status, hybrid
system operation status and energy
regeneration status.
Q
Display procedure
Multi-information display
Press
or
of the meter control
switches and select
, and then press
or
to select the energy monitor
display.
Center Display
Press the “MENU” button on the
Remote Touch, then select
on the
menu screen.
If the “Trip information” or “History” screen
is displayed, select “Energy”.
Q
Reading the display
The arrows will appear in accordance
with the energy flow. When there is no
energy flow, arrows will not be dis-
played.
The color of the arrows will change as fol-
lows
Blue: When the hybrid battery (traction
battery) is regenerated or charged.
Yellow: When the hybrid battery (traction
battery) is in use.
Red: When the gasoline engine is in use.
Energy monitor
*
/consump-
tion screen
You can view the status of your
hybrid system (LC500h) and fuel
consumption information on the
multi-information display and Cen-
ter Display.
The energy monitor or consump-
tion screen can be displayed on the
side display.
System components
A
B
C
D
E
Energy monitor (LC500h)
109
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Multi-information display
The image shows all the arrows as an
example. The actual display will vary
depending on conditions.
Gasoline engine
Hybrid battery (traction battery)
Tires
Center Display
The image shows all the arrows as an
example. The actual display will vary
depending on conditions.
Gasoline engine
Electric motor (traction motor)
Hybrid battery (traction battery)
Tires
Side display
The image shows all the arrows as an
example. The actual display will vary
depending on conditions.
Gasoline engine
Hybrid battery (traction battery)
Tires
Q
Hybrid battery (traction battery) status
The display changes in 8 levels according
to the remaining charge amount of the
hybrid battery (traction battery).
O
The figure shows the multi-information
display as an example for explanation.
O
These images are examples only, and
may vary slightly from actual conditions.
Low
High
Q
Remaining charge amount warning of
hybrid battery (traction battery)
O
The buzzer sounds intermittently when
the hybrid battery (traction battery)
remains without charging while the shift
A
B
C
A
B
C
D
A
B
C
A
B
110
2-1. Instrument cluster
lever is in N, or the remaining charge
amount drops below a certain level. If the
remaining charge amount drops further,
the buzzer sounds continuously.
O
When a warning message is shown on
the multi-information display and the
buzzer sounds, follow the instructions
displayed on the screen to perform trou-
bleshooting.
Press the “MENU” button on the
Remote Touch, then select
on the
menu screen, and then select “Trip
information” or “History”.
Q
Trip information
If a screen other than “Trip informa-
tion” is displayed, select “Trip informa-
tion”.
Resetting the consumption data
Fuel consumption in the past 15
minutes
Current fuel consumption
Regenerated energy in the past 15
minutes (LC500h)
One symbol indicates 50 Wh. Up to 5
symbols are shown.
Average vehicle speed since the
engine <hybrid system> was started.
Elapsed time since the engine
<hybrid system> was started.
Cruising range
Average fuel consumption for the past 15
minutes is divided by color into past aver-
ages and averages attained since the
engine switch <power switch> was last
turned to IGNITION ON mode <ON
mode>. Use the displayed average fuel
consumption as a reference.
The image is an example only, and may
vary slightly from actual conditions.
Q
History
If a screen other than “History” is dis-
played, select “History”.
Best recorded fuel consumption
Latest fuel consumption
Previous fuel consumption record
Resetting the History data
Updating the latest fuel consump-
tion data
The latest fuel consumption history is
divided by color into past averages and the
average fuel consumption since the last
updated. Use the displayed average fuel
consumption as a reference.
The image is an example only, and may
vary slightly from actual conditions.
Consumption
A
B
C
D
E
F
G
A
B
C
D
E
111
2
2-1. Instrument cluster
V
eh
icle
st
at
us
in
fo
rm
at
ion
an
d i
nd
ica
tor
s
Q
Updating the History data
Update the latest fuel consumption by
selecting “Update” to measure the current
fuel consumption again.
Q
Resetting the data
The fuel consumption data can be deleted
by selecting “Clear”.
Q
Cruising range
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining.
This distance is computed based on your
average fuel consumption. As a result, the
actual distance that can be driven may differ
from that displayed.
Display the vehicle information on the
side display (
P.277) and then select
or
to display the desired
screen.
Q
Trip information (type A)
Displays the average fuel consumption
and regenerated energy for the past 10
minutes in 1 minute intervals
(LC500h), as well as the cruising
range.
The image is an example only, and may
vary slightly from actual conditions.
Use the displayed average fuel consump-
tion as a reference.
Q
Trip information (type B)
Displays the cruising range, latest fuel
consumption and the amount of time
elapsed since the engine <hybrid sys-
tem> was started.
The image is an example only, and may
vary slightly from actual conditions.
Use the displayed average fuel consump-
tion as a reference.
Q
History
Displays the average fuel consump-
tion, last average fuel consumption and
highest fuel consumption.
The image is an example only, and may
vary slightly from actual conditions.
Use the displayed average fuel consump-
tion as a reference.
Q
Energy monitor (LC500h)
Displays the hybrid system operation
and energy recovery states. (
P.108)
Using the side display
3
113
3
Before drivi
ng
Before driving
3-1. Key information
Keys . . . . . . . . . . . . ..
114
3-2. Opening, closing and locking the
doors and trunk
Doors . . . . . . . . . . . ...
118
Trunk . . . . . . . . . . . ...
122
Smart entry & start system. .
125
3-3. Adjusting the seats
Front seats. . . . . . . . . .
130
Driving position memory . .
132
Head restraints. . . . . . .
136
3-4. Adjusting the steering wheel and
mirrors
Steering wheel . . . . . . .
138
Inside rear view mirror. . . .
139
Outside rear view mirrors. ..
140
3-5. Opening, closing the windows
Power windows . . . . . . ..
143
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст