Lexus UX250h (2023 year). Manual in english — page 24
396
7-2. Steps to take in an emergency
■
When the electronic key does not work
properly
●
Make sure that the smart access system
with push-button start has not been deac-
tivated in the customization setting. If it is
off, turn the function on.
(Customizable features:
P.429)
●
Check if battery-saving mode is set. If it is
set, cancel the function. (
P.128)
●
The electronic key function may have
stopped. (
P.128)
■
Unlocking the door
Use the mechanical key (
P.106) to
perform the following operations.
1
Insert the mechanical key while
pulling on the driver’s door handle.
2
Unlock the door.
3
Remove the key, return the handle,
and then pull the handle again.
■
Locking the door
1
With the door open, push down the
inside lock button.
2
Close the door.
■
Key linked functions
The opening and closing of the power win-
dows and moon roof (if equipped) can be
linked to key operation by a customized
If the electronic key does not
operate properly
If communication between the
electronic key and vehicle is inter-
rupted (
P.128) or the electronic
key cannot be used because the
battery is depleted, the smart
access system with push-button
start and wireless remote control
cannot be used. In such cases, the
doors can be opened and the hybrid
system can be started by following
the procedure below.
NOTICE
■
In case of a smart access system with
push-button start malfunction or
other key-related problems
Take your vehicle with all the electronic
keys provided with your vehicle, includ-
ing the card key, to your Lexus dealer.
Locking and unlocking the doors
397
7-2. Steps to take in an emergency
7
W
hen
tro
ub
le
ar
ise
s
setting.
1
Closes the windows and moon roof
(turn and hold)
2
Opens the windows and moon roof
(turn and hold)
1
Ensure that the shift lever is in P and
depress the brake pedal.
2
Touch the Lexus emblem side of
the electronic key to the power
switch.
When the electronic key is detected, a
buzzer sounds and the power switch will
turn to ON.
When the smart access system with push-
button start is deactivated in customization
setting, the power switch will turn to ACC.
3
Firmly depress the brake pedal and
check that
is shown on the
multi-information display.
4
Press the power switch.
In the event that the hybrid system still can-
not be started, contact your Lexus dealer.
■
Stopping the hybrid system
Set the parking brake, shift the shift lever to
P and press the power switch as you nor-
mally do when stopping the hybrid system.
■
Electronic key battery
As the above procedure is a temporary
measure, it is recommended that the elec-
tronic key battery be replaced immediately
when the battery is depleted. (
P.359)
■
Alarm (for Canada)
Using the mechanical key to lock the doors
will not set the alarm system.
If a door is unlocked using the mechanical
key when the alarm system is set, the alarm
may be triggered. (
P.69)
■
Changing power switch modes
Release the brake pedal and press the
power switch in step
3
above.
The hybrid system does not start and modes
will be changed each time the switch is
pressed. (
P.166)
WARNING
■
When using the mechanical key and
operating the power windows or
moon roof (if equipped)
Operate the power window or moon
roof after checking to make sure that
there is no possibility of any passenger
having any of their body parts caught in
the window or moon roof.
Also, do not allow children to operate the
mechanical key. It is possible for children
and other passengers to get caught in
the power window or moon roof.
Starting the hybrid system
398
7-2. Steps to take in an emergency
If you have a set of jumper (or booster)
cables and a second vehicle with a 12-
volt battery, you can jump start your
vehicle by following the steps below.
1
Confirm that the electronic key is
being carried.
When connecting the jumper (or booster)
cables, depending on the situation, the
alarm may activate and doors locked.
(
P.70)
2
Open the hood (
P.329) and
fuse box cover.
Push the tab in and lift the lid off.
3
Open the exclusive jump starting
terminal cover.
4
Remove the engine cover.
If the 12-volt battery is dis-
charged
The following procedures may be
used to start the hybrid system if the
vehicle’s 12-volt battery is dis-
charged.
You can also call your Lexus dealer
or a qualified repair shop.
Restarting the hybrid system
399
7-2. Steps to take in an emergency
7
W
hen
tro
ub
le
ar
ise
s
5
Connect a positive jumper cable clamp to
on your vehicle and connect the
clamp on the other end of the positive cable to
on the second vehicle. Then,
connect a negative cable clamp to
on the second vehicle and connect the
clamp at the other end of the negative cable to
.
Exclusive jump starting terminal (your vehicle)
Positive (+) battery terminal (second vehicle)
Negative (-) battery terminal (second vehicle)
Solid, stationary, unpainted metallic point away from the exclusive jump starting
terminal and any moving parts as shown in the illustration
6
Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
recharge the 12-volt battery of your
vehicle.
7
Maintain the engine speed of the
second vehicle and start the hybrid
system of your vehicle by turning
the power switch to ON.
8
Make sure the “READY” indicator
comes on. If the indicator light does
not come on, contact your Lexus
dealer.
9
Once the hybrid system has
started, remove the jumper cables
in the exact reverse order from
which they were connected.
10
Close the exclusive jump starting
terminal cover, and reinstall the
fuse box cover to its original posi-
tion.
Once the hybrid system starts, have
the vehicle inspected at your Lexus
dealer as soon as possible.
■
Starting the hybrid system when the 12-
volt battery is discharged
The hybrid system cannot be started by
A
B
C
D
A
B
C
D
400
7-2. Steps to take in an emergency
push-starting.
■
To prevent 12-volt battery discharge
●
Turn off the headlights, the air condition-
ing system, the audio system, etc. while
the hybrid system is off.
●
Turn off any unnecessary electrical com-
ponents when the vehicle is running at a
low speed for an extended period, such
as in heavy traffic.
■
Charging the 12-volt battery
The electricity stored in the 12-volt battery
will discharge gradually even when the
vehicle is not in use, due to natural dis-
charge and the draining effects of certain
electrical appliances. If the vehicle is left for
a long time, the 12-volt battery may dis-
charge, and the hybrid system may be
unable to start. (The 12-volt battery
recharges automatically while the hybrid
system is operating.)
■
When the 12-volt battery is removed or
discharged
●
Information stored in the ECU is cleared.
When the 12-volt battery is depleted,
have the vehicle inspected at your Lexus
dealer.
●
In some cases, it may not be possible to
unlock the doors using the smart access
system with push-button start when the
12-volt battery is discharged. Use the
wireless remote control or the mechani-
cal key to lock or unlock the doors.
●
The hybrid system may not start on the
first attempt after the 12-volt battery has
recharged but will start normally after the
second attempt. This is not a malfunction.
●
The power switch mode is memorized by
the vehicle. When the 12-volt battery is
reconnected, the system will return to the
mode it was in before the 12-volt battery
was discharged. Before disconnecting
the 12-volt battery, turn the power switch
off.
If you are unsure what mode the power
switch was in before the 12-volt battery
discharged, be especially careful when
reconnecting the 12-volt battery.
●
The power back door (if equipped) must
be initialized. (
P.121)
■
When replacing the 12-volt battery
●
Use a Central Degassing type 12-volt
battery (European Regulations).
●
Use a 12-volt battery that the case size is
same as the previous one (LN1), 20 hour
rate capacity (20HR) is equivalent
(45Ah) or greater, and performance rat-
ing (CCA) is equivalent (285A) or
greater.
• If the sizes differ, the 12-volt battery can-
not be properly secured.
• If an improper 12-volt battery is used, bat-
tery performance may decrease and the
hybrid system may not be able to restart.
• If the 20 hour rate capacity is low, even if
the time period where the vehicle is not
used is a short time, the 12-volt battery
may discharge and hybrid system may
not be able to start.
●
Use a 12-volt battery with a handle. If a
12-volt battery without a handle is used,
removal is more difficult.
●
After exchanging, firmly attach the fol-
lowing items to the exhaust hole of the
12-volt battery.
• Confirm that the elbow is securely
attached to the exhaust hose and exhaust
hole.
• Confirm that the exhaust hole plug is
securely attached to the exhaust hole that
the elbow is not attached to.
• Use the elbow/exhaust hole plug
included with the 12-volt battery
exchanged or the one installed on the
battery prior to the exchange. (Depend-
ing on the 12-volt battery to be
exchanged, the exhaust hole may be
plugged.)
401
7-2. Steps to take in an emergency
7
W
hen
tro
ub
le
ar
ise
s
Exhaust hole
Exhaust hole plug
Exhaust hose
Elbow
For details, consult your Lexus dealer.
WARNING
■
When removing the 12-volt battery
terminals
Always remove the negative (-) terminal
first. If the positive (+) terminal contacts
any metal in the surrounding area when
the positive (+) terminal is removed, a
spark may occur, leading to a fire in addi-
tion to electrical shocks and death or
serious injury.
■
Avoiding 12-volt battery fires or
explosions
Observe the following precautions to
prevent accidentally igniting the flamma-
ble gas that may be emitted from the 12-
volt battery:
●
Make sure each jumper cable is con-
nected to the correct terminal and that
it is not unintentionally in contact with
any other than the intended terminal.
A
B
C
D
●
Do not allow the other end of the
jumper cable connected to the “+” ter-
minal to come into contact with any
other parts or metal surfaces in the
area, such as brackets or unpainted
metal.
●
Do not allow the + and - clamps of the
jumper cables to come into contact
with each other.
●
Do not smoke, use matches, cigarette
lighters or allow open flame near the
12-volt battery.
■
12-volt battery precautions
The 12-volt battery contains poisonous
and corrosive acidic electrolyte, while
related parts contain lead and lead com-
pounds. Observe the following precau-
tions when handling the 12-volt battery:
●
When working with the 12-volt battery,
always wear safety glasses and take
care not to allow any battery fluids
(acid) to come into contact with skin,
clothing or the vehicle body.
●
Do not lean over the 12-volt battery.
●
In the event that battery fluid (acid)
comes into contact with the skin or
eyes, immediately wash the affected
area with water and seek medical
attention.
Place a wet sponge or cloth over the
affected area until medical attention
can be received.
●
Always wash your hands after han-
dling the 12-volt battery and other bat-
tery-related parts.
●
Do not allow children near the 12-volt
battery.
■
After recharging the 12-volt battery
Have the 12-volt battery inspected at
your Lexus dealer as soon as possible.
If the 12-volt battery is deteriorating, con-
tinued use may cause the 12-volt battery
to emit a malodorous gas, which may be
detrimental to the health of passengers.
402
7-2. Steps to take in an emergency
If the engine coolant temperature
gauge enters the red zone or
“Engine Coolant Temp High Stop in
a Safe Place See Owner’s Manual”
is shown on the multi-information
display
1
Stop the vehicle in a safe place and
turn off the air conditioning system,
and then stop the hybrid system.
2
If you see steam:
Carefully lift the hood after the
steam subsides.
If you do not see steam:
Carefully lift the hood.
3
After the hybrid system has cooled
down sufficiently, inspect the hoses
WARNING
■
When replacing the 12-volt battery
●
When the vent plug is close to the hold
down clamp, the battery fluid (acid)
may leak.
●
For information regarding battery
replacement, contact your Lexus
dealer.
●
After exchanging, securely attach the
elbow connected to the exhaust hose,
and exhaust hole plug to the exhaust
hole of the exchanged 12-volt battery.
If not properly installed, gases (hydro-
gen) may leak into the vehicle interior,
and there is the possible danger of the
gas igniting and exploding.
NOTICE
■
When handling jumper cables
When connecting the jumper cables,
ensure that they do not become entan-
gled in the cooling fans or belt.
■
To prevent damaging the vehicle
The exclusive jump starting terminal is to
be used when charging the 12-volt bat-
tery from another vehicle in an emer-
gency. It cannot be used to jump start
another vehicle.
If your vehicle overheats
The following may indicate that
your vehicle is overheating.
The engine coolant temperature
gauge (
P.79, 83) enters the
red zone, or a loss of hybrid sys-
tem power is experienced. (For
example, the vehicle speed does
not increase.)
“Engine Coolant Temp High Stop
in a Safe Place See Owner’s
Manual” or “Hybrid system over-
heated Output power reduced” is
shown on the multi-information
display.
Steam comes out from under the
hood.
Correction procedures
403
7-2. Steps to take in an emergency
7
W
hen
tro
ub
le
ar
ise
s
and radiator core (radiator) for any
leaks.
Radiator
Cooling fans
If a large amount of coolant leaks, immedi-
ately contact your Lexus dealer.
4
The coolant level is satisfactory if it
is between the “MAX” and “MIN”
lines on the reservoir.
Reservoir
“MAX” line
“MIN” line
5
Add coolant if necessary.
Water can be used in an emergency if
coolant is unavailable.
6
Start the hybrid system and turn the
air conditioning system on to check
that the radiator cooling fans oper-
ate and to check for coolant leaks
from the radiator or hoses.
The fans operate when the air conditioning
system is turned on immediately after a
cold start. Confirm that the fans are oper-
ating by checking the fan sound and air
flow. If it is difficult to check these, turn the
air conditioning system on and off repeat-
edly.
(The fans may not operate in freezing tem-
peratures.)
7
If the fans are not operating:
Stop the hybrid system immediately
and contact your Lexus dealer.
If the fans are operating:
Have the vehicle inspected at the
nearest Lexus dealer.
8
Check if “Engine Coolant Temp
High Stop in a Safe Place See
Owner’s Manual” is shown on the
multi-information display.
If the message does not disappear:
Stop the hybrid system and contact
your Lexus dealer.
If the message is not displayed:
Have the vehicle inspected at the
nearest Lexus dealer.
A
B
A
B
C
404
7-2. Steps to take in an emergency
If “Hybrid system overheated Out-
put power reduced” is shown on the
multi-information display
1
Stop the vehicle in a safe place.
2
Stop the hybrid system and care-
fully lift the hood.
3
After the hybrid system has cooled
down, inspect the hoses and radia-
tor core (radiator) for any leaks.
Radiator
Cooling fans
If a large amount of coolant leaks, immedi-
ately contact your Lexus dealer.
4
The coolant level is satisfactory if it
is between the “F” and “L” lines on
the reservoir.
Reservoir
“F” line
“L” line
5
Add coolant if necessary.
Water can be used in an emergency if
coolant is unavailable.
If water has been added in an emergency,
have the vehicle inspected by your Lexus
dealer as soon as possible.
6
After stopping the hybrid system
and waiting for 5 minutes or more,
start the hybrid system again and
check if “Hybrid system over-
heated Output power reduced” is
shown on the multi-information dis-
play.
If the message does not disappear:
Stop the hybrid system and contact your
Lexus dealer.
If the message is not displayed:
The hybrid system temperature has
dropped and the vehicle may be driven
normally.
However, if the message appears again
frequently, contact your Lexus dealer.
A
B
A
B
C
WARNING
■
To prevent an accident or injury when
inspecting under the hood of your
vehicle
Observe the following precautions.
Failure to do so may result in serious
injury such as burns.
●
If steam is seen coming from under the
hood, do not open the hood until the
steam has subsided. The engine com-
partment may be very hot.
405
7-2. Steps to take in an emergency
7
W
hen
tro
ub
le
ar
ise
s
1
Stop the hybrid system. Shift the
shift lever to P and set the parking
brake.
2
Remove the mud, snow or sand
from around the front wheels.
3
Place wood, stones or some other
material under the front wheels to
help provide traction.
4
Restart the hybrid system.
5
Shift the shift lever to D or R and
release the parking brake. Then,
while exercising caution, depress
the accelerator pedal.
■
When it is difficult to free the vehicle
Press the
switch to turn off TRAC.
(
P.261)
WARNING
●
After the hybrid system has been
turned off, check that the “READY”
indicator is off. When the hybrid sys-
tem is operating, the gasoline engine
may automatically start, or the cooling
fan may suddenly operate even if the
gasoline engine stops. Do not touch or
approach rotating parts such as the
fan, which may lead to fingers or cloth-
ing (especially a tie, a scarf or a muf-
fler) getting caught, resulting in serious
injury.
●
Do not loosen the coolant reservoir
cap while the hybrid system and radia-
tor are hot.
High temperature steam or coolant
could spray out.
NOTICE
■
When adding engine/power control
unit coolant
Add coolant slowly after the hybrid sys-
tem has cooled down sufficiently. Adding
cool coolant to a hot hybrid system too
quickly can cause damage to the hybrid
system.
■
To prevent damage to the cooling
system
Observe the following precautions:
●
Avoid contaminating the coolant with
foreign matter (such as sand or dust
etc.).
●
Do not use any coolant additive.
If the vehicle becomes stuck
Carry out the following procedures
if the tires spin or the vehicle
becomes stuck in mud, dirt or snow:
Recovering procedure
406
7-2. Steps to take in an emergency
WARNING
■
When attempting to free a stuck vehi-
cle
If you choose to push the vehicle back
and forth to free it, make sure the sur-
rounding area is clear to avoid striking
other vehicles, objects or people. The
vehicle may also lunge forward or lunge
back suddenly as it becomes free. Use
extreme caution.
■
When shifting the shift lever
Be careful not to shift the shift lever with
the accelerator pedal depressed.
This may lead to unexpected rapid accel-
eration of the vehicle that may cause an
accident resulting in death or serious
injury.
NOTICE
■
To avoid damage to the hybrid trans-
mission and other components
●
Avoid spinning the tires and depress-
ing the accelerator pedal more than
necessary.
●
If the vehicle remains stuck even after
these procedures are performed, the
vehicle may require towing to be
freed.
407
8
8
Vehic
le spe
cif
ic
at
ion
s
Vehicle specifications
8-1. Specifications
Maintenance data (fuel, oil level,
etc.) . . . . . . . . . . . ..
408
Fuel information. . . . . . ..
415
Tire information. . . . . . ...
417
8-2. Customization
Customizable features. . .
426
8-3. Initialization
Items to initialize . . . . . .
438
408
8-1. Specifications
8-1.Specifications
*1
: Unladen vehicle
*2
: Vehicles without shark fin antenna
*3
: Vehicles with shark fin antenna
■
Vehicle identification number
The vehicle identification number
(VIN) is the legal identifier for your
vehicle. This is the primary identifica-
tion number for your Lexus. It is used in
registering the ownership of your vehi-
cle.
This number is on the top left of the
instrument panel.
This number is also on the Certification
Label.
Maintenance data (fuel, oil level, etc.)
Dimensions and weight
Overall length
177.0 in. (4495 mm)
Overall width
72.4 in. (1840 mm)
Overall height
*1
59.8 in. (1520 mm)
*2
60.6 in. (1540 mm)
*3
Wheelbase
103.9 in. (2640 mm)
Tread
Front
61.0 in. (1550 mm)
Rear
61.0 in. (1550 mm)
Vehicle capacity weight
(Occupants + luggage)
890 lb. (405 kg)
Seating capacity
Seating capacity
5 (Front 2, Rear 3)
Vehicle identification
409
8-1. Specifications
8
Vehic
le spe
cif
ic
at
ion
s
This number is also stamped under the
right-hand front seat.
■
Engine number
The engine number is stamped on the
engine block as shown.
Engine
Model
2.0 L 4-cylinder (M20A-FXS)
Type
4-cylinder in line, 4-cycle, gasoline
Bore and stroke
3.17
3.84 in. (80.5
97.6 mm)
Displacement
121.3 cu.in. (1987 cm
3
)
Valve clearance
Automatic adjustment
Drive belt tension
Automatic adjustment
Fuel
Fuel type
Unleaded gasoline only
Octane Rating
87 (Research Octane Number 91) or higher
Fuel tank capacity (Reference)
10.6 gal. (40 L, 8.8 Imp.gal.)
410
8-1. Specifications
Front
Rear (AWD models)
■
Oil capacity (Drain and refill [Ref-
erence
*
])
*
: The engine oil capacity is a reference
quantity to be used when changing the
engine oil. Warm up the engine and turn
off the hybrid system, wait more than 5
minutes, and check the oil level on the
dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is used in
your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor
Oil” or equivalent to satisfy the follow-
ing grade and viscosity.
Oil grade:
ILSAC GF-6B multigrade engine oil
Recommended viscosity:
SAE 0W-16
SAE 0W-16 is the best choice for
good fuel economy and good starting
in cold weather.
If SAE 0W-16 is not available, SAE
0W-20 oil may be used. However, it
must be replaced with SAE 0W-16 at
Electric motor (traction motor)
Type
Permanent magnet synchronous motor
Maximum output
80 kW
Maximum torque
149.0 ft•lbf (202 N•m, 20.6 kgf•m)
Type
Induction asynchronous motor
Maximum output
5.3 kW
Maximum torque
40.6 ft•lbf (55 N•m, 5.6 kgf•m)
Hybrid battery (traction battery)
Type
Nickel-Metal hydride battery
Voltage
7.2 V/module
Capacity
6.5 Ah
Quantity
30 modules
Nominal voltage
216 V
Lubrication system
With filter
4.5 qt. (4.3 L, 3.8 Imp.qt.)
Without filter 4.1 qt. (3.9 L, 3.4 Imp.qt.)
411
8-1. Specifications
8
Vehic
le spe
cif
ic
at
ion
s
the next oil change.
Outside temperature
Oil viscosity (0W-16 is explained here
as an example):
• The 0W in 0W-16 indicates the
characteristic of the oil which allows
cold startability. Oils with a lower
value before the W allow for easier
starting of the engine in cold
weather.
• The 16 in 0W-16 indicates the vis-
cosity characteristic of the oil when
the oil is at high temperature. An oil
with a higher viscosity (one with a
higher value) may be better suited if
the vehicle is operated at high
speeds, or under extreme load con-
ditions.
How to read oil container label:
API registered mark is added to some
oil containers to help you select the oil
you should use.
*
: The coolant capacity is a reference quantity.
If replacement is necessary, contact your Lexus dealer.
A
Cooling system
Capacity
*
Gasoline
engine
6.3 qt. (6.0 L, 5.3 Imp.qt.)
Power con-
trol unit
1.8 qt. (1.7 L, 1.5 Imp.qt.)
Coolant type
Use either of the following:
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-
silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid tech-
nology
Do not use plain water alone.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст