Lexus LX600 (2022 year). Manual in english — page 18
299
4-5. Using the driving support systems
4
D
riv
ing
Tire position indicator lines (black, white)
Indicates the estimated position of the front tires.
Vehicle position indicator lines (blue)
Indicates the estimated position of the vehicle.
Intuitive parking assist
Displayed if an obstacle is detected while the intuitive parking assist is turned on.
Display off button
Changes the screen back to the previously displayed screen, such as the audio screen.
Display mode switching button
Switches display mode every time touch the button.
Under vehicle terrain view (rear wheel) selection button
Switch the under vehicle terrain view (rear wheel) & dual side views (
Automatic display mode selection button
Setting button
Changes settings, such as the automatically display cornering view, the vehicle body color,
the intuitive parking assist detection distance. (
In addition to screen switching by
operating the VIEW switch, automatic
display mode is available. In this mode,
the screen is switched automatically in
response to vehicle speed.
In automatic display mode, the monitor
will automatically display images in the
following situations:
When the shift lever is shifted to N
or D position.
When vehicle speed is reduced to
approximately 6 mph (10 km/h) or
less.
■
Under vehicle terrain view & dual side
views
●
The screen can be displayed when the
shift lever is in P, D or N.
●
In the following situations, under vehicle
terrain view will disappear.
• When the vehicle is driven with the steer-
ing wheel turned almost all the way to
one side
• After the engine starts or the system
returns to normal, a fixed distance or
more has not yet been driven
• When the tires are slipping or spinning
• Multi Terrain ABS is activated
• When there is a malfunction in the system
●
If the outside rear view mirrors are folded
while the under vehicle terrain view is
being displayed, a separate screen is dis-
played.
●
If the vehicle is driven with the steering
wheel turned to a certain steering angle
or greater, a part of the screen may dis-
appear. However, this is not a malfunc-
J
K
L
M
N
O
P
Q
Automatic display mode
300
4-5. Using the driving support systems
tion.
●
In the following situations, the system may
not operate normally.
• The road is covered with snow
• When there are shadows due to light
sources such as sunlight or illumination
• When driving on slippery roads or tires
are spinning
• Dirt or foreign matter is adhering to the
camera lens
• There is water in front of the vehicle (a
river, puddle, sea water, etc.)
• Optional equipment has been installed
• When the camera is covered or there is
an object in the image capture range
• Tires have been replaced
• When the back door is open
• When the steering wheel is operated at
or more than a specified steering angle
• On roads that are not flat, such as slopes
Lines indicating current vehicle and tire position are displayed in a composite view
on an image taken behind the current vehicle position and assists the driver to
check conditions underneath the vehicle or determine the position of the rear tires.
To display the screen, press the VIEW switch when the shift lever is in the P, D or N
position, select the under vehicle terrain view (rear wheel) selection switch.
It is necessary to drive a certain distance or more for the image to be displayed.
If the under vehicle terrain view display is selected while the screen is displayed,
the screen switches from normal to magnified display. (Selecting the display
again returns the screen to the normal display)
WARNING
■
Guide lines
The tire position indicator lines and vehi-
cle position indicator lines may differ
from actual vehicle positions depending
on the number of passengers, cargo
weight, road grade, road surface condi-
tions, brightness of the surrounding envi-
ronment, whether tires or suspension
parts other than those specified are
equipped, etc. Always drive the vehicle
while confirming the safety of your sur-
roundings.
■
Under vehicle terrain view display
The image displayed is one that was pre-
viously taken at a point behind the cur-
rent vehicle position. In cases such as
when objects move after the image is
taken, the image displayed on the screen
may differ from the actual state. In addi-
tion, when driving in the dark such as at
night, there are cases when obstacles
cannot be confirmed from the image.
Under vehicle terrain view (rear wheel) & dual side views
301
4-5. Using the driving support systems
4
D
riv
ing
Current vehicle position
Image displayed in the under vehicle terrain view (rear wheel) (image taken
behind the current vehicle position)
Vehicle position at the time the image was taken (behind the current vehicle
position)
Selecting the display
Tire position indicator lines (black, white)
Indicates the estimated position of the rear tires.
Vehicle position indicator lines (blue)
Indicates the estimated position of the vehicle.
1.5 ft. (0.5 m) distance guide line (red, black)
Indicate the estimated distance from the front end of the vehicle.
Front tire contact line (blue)
Indicate estimated tire positions on the image.
Vehicle width lines (blue)
Indicate the width of the vehicle including the outside rear view mirrors.
Rear tire contact line (blue)
Indicate estimated tire positions on the image.
Intuitive parking assist
Displayed if an obstacle is detected while the intuitive parking assist is turned on.
Display off button
Screen display
A
B
C
D
E
F
G
H
I
J
K
L
302
4-5. Using the driving support systems
Changes the screen back to the previously displayed screen, such as the audio screen.
Return button
Return to the previous screen
Automatic display mode selection button
Setting button
Changes settings, such as the automatically display cornering view, the vehicle body color,
the intuitive parking assist detection distance. (
In addition to screen switching by
operating the VIEW switch, automatic
display mode is available. In this mode,
the screen is switched automatically in
response to vehicle speed. In auto-
matic display mode, the monitor will
automatically display images in the fol-
lowing situations:
When the shift lever is shifted to N
or D position.
When vehicle speed is reduced to
approximately 6 mph (10 km/h) or
less.
■
Under vehicle terrain view (rear wheel)
●
The screen can be displayed when the
shift lever is in P, D or N.
●
In the following situations, the display of
the under vehicle terrain view (rear
wheel) ends and the screen automatically
returns to the most recently used camera
screen. In addition, the under vehicle ter-
rain view (rear wheel) selection switch
cannot be operated until the next screen
can be displayed.
• When the vehicle is driven with the steer-
ing wheel turned almost all the way to
one side
• When vehicle speed reaches or exceeds
approximately 3 mph (5 km/h)
• When the tires are slipping or spinning
• Multi Terrain ABS is activated
• When there is a malfunction in the system
• When the steering wheel is operated at
or more than a specified steering angle
●
If the outside rear view mirrors are folded
while the under vehicle terrain view (rear
wheel) is being displayed, a separate
screen is displayed.
●
If the vehicle is driven with the steering
wheel turned to a certain steering angle
or greater, a part of the screen may dis-
appear. However, this is not a malfunc-
tion.
●
In the following situations, the system may
not operate normally or may not be able
to switch to the under vehicle terrain view
(rear wheel). In addition, the under vehi-
cle terrain view (rear wheel) selection
switch cannot be operated until the next
screen can be displayed.
• The road is covered with snow
• When there are shadows due to light
sources such as sunlight or illumination
• When driving on slippery roads or tires
are spinning
• Dirt or foreign matter is adhering to the
camera lens
• There is water in front of the vehicle (a
river, puddle, sea water, etc.)
• Optional equipment has been installed
• When the camera is covered or there is
an object in the image capture range
• Tires have been replaced
• When the back door is open
• When the steering wheel is operated at
or more than a specified steering angle
• On roads that are not flat, such as slopes
M
N
O
Automatic display mode
303
4-5. Using the driving support systems
4
D
riv
ing
The rear view & dual side views and the wide rear view & dual side views screen
provide support when checking the areas of behind the vehicle and around the
vehicle while backing up, for example while parking.
The screens will be displayed when the shift lever is in the R position.
Display mode switching button
WARNING
■
Guide lines
The tire position indicator lines and vehi-
cle position indicator lines may differ
from actual vehicle positions depending
on the number of passengers, cargo
weight, road grade, road surface condi-
tions, brightness of the surrounding envi-
ronment, whether tires or suspension
parts other than those specified are
equipped, etc.
Always drive the vehicle while confirm-
ing the safety of your surroundings.
■
Under vehicle terrain view (rear
wheel) display
The image displayed is one that was pre-
viously taken at a point behind the cur-
rent vehicle position. In cases such as
when objects move after the image is
taken, the image displayed on the screen
may differ from the actual state. In addi-
tion, when driving in the dark such as at
night, there are cases when obstacles
cannot be confirmed from the image.
Rear view & dual side views/wide rear view & dual side views
Screen display
A
304
4-5. Using the driving support systems
Each time the display mode switching button is selected, the mode will change between the
rear view & dual side views mode and the wide rear view & dual side views mode.
Front tire contact line (blue)
Rear tire contact line (blue)
Items
and
indicate estimated tire positions on the image.
Vehicle width extension guide line (blue)
Indicates the estimated vehicle width including the outside rear view mirrors.
Projected course lines (yellow)
Indicate the estimated course of the vehicle according to steering operations.
Distance guide line
Shows the distance behind the vehicle when the steering wheel is turned.
• The guide lines move in conjunction with the estimated course lines.
• The guide lines display points approximately 1.5 ft. (0.5 m) (red) and approximately 3 ft.
(1 m) (yellow) from the center of the edge of the bumper.
Rear Camera Detection
Displayed automatically when a pedestrian is detected.
Rear Cross Traffic Alert
When a sensor detects an obstacle, the direction of obstacle is displayed and the buzzer
sounds.
Intuitive parking assist
Displayed if an obstacle is detected while the intuitive parking assist is turned on.
Under vehicle terrain view (rear side) selection button
Switch the under vehicle terrain view (rear side) & dual side views (
Parking Support Brake
When the system determines that the possibility of a collision with detected target objects
is high, a warning message is displayed.
Setting button
Changes settings, such as the automatically display cornering view, the vehicle body color,
the intuitive parking assist detection distance. (
Guide line switching button
Each time the guide line switching button is selected, the mode will change between the
estimated course line mode and the vehicle center estimated course line mode.
Vehicle center estimated course line
Shows a vehicle center estimated course when the steering wheel is turned.
B
C
B
C
D
E
F
G
H
I
J
K
L
M
N
305
4-5. Using the driving support systems
4
D
riv
ing
■
Rear view & dual side views/wide rear view & dual side views
●
The monitor is canceled when the shift lever is shifted into any position other than the R
position.
●
For details about the intuitive parking assist (
P.261), Rear Cross Traffic Alert function
(
P.267) and Parking Support Brake function. (
●
The display position of the intuitive parking assist and the position of obstacles displayed
in the camera image do not match.
■
Guide lines
If the back door is not closed, guide lines will not be displayed. If the guide lines do not dis-
play even when the back door is closed, have the vehicle inspected at your Lexus dealer.
When parking in a space which is in the
reverse direction to the space
described in the procedure below, the
steering directions will be reversed.
1
Shift the shift lever to the R position.
2
Turn the steering wheel so that the
estimated course lines are within
the parking space, and back up
slowly.
WARNING
■
Intuitive parking assist display
When a sensor indicator on the intuitive parking assist display illuminates in red or a
buzzer sounds continuously, be sure to check the area around the vehicle immediately
and do not proceed any further until safety has been ensured, otherwise an unexpected
accident may occur.
■
Rear view & dual side views/wide rear view & dual side views display
As the intuitive parking assist display and Rear Cross Traffic Alert display are displayed
over the camera view, it may be difficult to see the intuitive parking assist display and Rear
Cross Traffic Alert display depending on the color and brightness of the surrounding
area.
Parking
306
4-5. Using the driving support systems
Parking space
Estimated course lines
3
When the rear position of the vehi-
cle has entered the parking space,
turn the steering wheel so that the
vehicle width guide lines are within
the left and right dividing lines of
the parking space.
Vehicle width guide line
4
Once the vehicle width guide lines
and the parking space lines are
parallel, straighten the steering
wheel and back up slowly until the
vehicle has completely entered the
parking space.
5
Stop the vehicle in an appropriate
place, and finish parking.
Lines indicating current vehicle and tire position are displayed in a composite view
on an image taken in front of the current vehicle position and assists the driver to
check conditions underneath the vehicle or determine the position of the rear tires.
To display the screen, when the shift lever is in the R position, select the under vehi-
cle terrain view (rear side) selection switch.
It is necessary to drive a certain distance or more for the image to be displayed.
If the under vehicle terrain view display is selected while the screen is displayed,
the screen switches from normal to magnified display. (Selecting the display
again returns the screen to the normal display)
A
B
A
Under vehicle terrain view (rear side) & dual side views
307
4-5. Using the driving support systems
4
D
riv
ing
Current vehicle position
Image displayed in the under vehicle terrain view (rear side) (image taken in
front of the current vehicle position)
Vehicle position at the time the image was taken (in front of the current vehicle
position)
Front tire contact line (blue)
Indicate estimated tire positions on the image.
Vehicle width lines (blue)
Indicate the width of the vehicle including the outside rear view mirrors.
Rear tire contact line (blue)
Indicate estimated tire positions on the image.
Tire position indicator lines (black, white)
Indicates the estimated position of the rear tires.
Vehicle position indicator lines (blue)
Indicates the estimated position of the vehicle.
Intuitive parking assist
Displayed if an obstacle is detected while the intuitive parking assist is turned on.
Return switch
Return to the previous screen
Selecting the display
Setting button
Screen display
A
B
C
D
E
F
G
H
I
J
K
L
308
4-5. Using the driving support systems
Changes settings, such as the automatically display cornering view, the vehicle body color,
the intuitive parking assist detection distance. (
■
Under vehicle terrain view (rear side)
●
The screen can be displayed when the
shift lever is in R.
●
While the under vehicle terrain view
(rear side) is displayed, if the vehicle
speed reaches or exceeds approximately
3 mph (5 km/h), the screen automatically
returns to the previous display.
●
In the following situations, the display of
the under vehicle terrain view (rear side)
ends and the screen automatically
returns to the most recently used camera
screen. In addition, the under vehicle ter-
rain view (rear side) selection switch can-
not be operated until the next screen can
be displayed.
• When the tires are slipping or spinning
• Multi Terrain ABS is activated
• When there is a malfunction in the system
• Rear Cross Traffic Alert, Rear Camera
Detection or Parking Support Brake is
activated
●
If the outside rear view mirrors are folded
while the under vehicle terrain view (rear
side) is being displayed, a separate
screen is displayed.
●
If the vehicle is driven with the steering
wheel turned to a certain steering angle
or greater, a part of the screen may dis-
appear. However, this is not a malfunc-
tion.
●
In the following situations, the system may
not operate normally or may not be able
to switch to the under vehicle terrain view
(rear side). In addition, the under vehicle
terrain view (rear side) selection switch
cannot be operated until the next screen
can be displayed.
• The road is covered with snow
• When there are shadows due to light
sources such as sunlight or illumination
• When driving on slippery roads or tires
are spinning
• Dirt or foreign matter is adhering to the
camera lens
• There is water in front of the vehicle (a
river, puddle, sea water, etc.)
• Optional equipment has been installed
• When the camera is covered or there is
an object in the image capture range
• Tires have been replaced
• When the back door is open
• When the steering wheel is operated at
or more than a specified steering angle
• On roads that are not flat, such as slopes
When the four-wheel drive control
switch is in H4 and Multi-terrain Select
is off, the various screens display infor-
mation to support several different
driving situations, such as when check-
WARNING
■
Guide lines
The tire position indicator lines and vehi-
cle position indicator lines may differ
from actual vehicle positions depending
on the number of passengers, cargo
weight, road grade, road surface condi-
tions, brightness of the surrounding envi-
ronment, whether tires or suspension
parts other than those specified are
equipped, etc.
Always drive the vehicle while confirm-
ing the safety of your surroundings.
■
Under vehicle terrain view (rear side)
display
●
The image displayed is one that was
previously taken at a point in front of
the current vehicle position. In cases
such as when objects move after the
image is taken, the image displayed on
the screen may differ from the actual
state. In addition, when driving in the
dark such as at night, there are cases
when obstacles cannot be confirmed
from the image.
●
The area covered by the camera is lim-
ited. When driving, be sure to check
the vehicle’s surroundings with your
own eyes and the vehicle’s mirrors.
Screen display and functions
309
4-5. Using the driving support systems
4
D
riv
ing
ing for obstacles when moving forward
The moving view screen and the see-
through view screen provide support
when checking the areas of around the
vehicle while parking. These screens
display an image of the vicinity of the
vehicle combined from the 4 cameras.
The screen will display a 360° view
around the vehicle from either inside
the vehicle or from a birds-eye view at
an angle.
To display the moving view/see-
through view screen, press the VIEW
switch when the shift lever is in the P
position and the intuitive parking assist
is enabled.
Moving view
Display off button
Changes the screen back to the previously
displayed screen, such as the audio screen.
Display mode switching button
Select to change the display mode
between the moving view and the see-
through view.
Rotation pause/resume button
Pauses and resumes the rotation of the dis-
play.
Setting button
Changes settings, such as the automati-
cally display cornering view, the vehicle
body color, the intuitive parking assist
detection distance. (
See-through view
Display off button
Changes the screen back to the previously
displayed screen, such as the audio screen.
Display mode switching button
Select to change the display mode
between the moving view and the see-
through view.
Rotation pause/resume button
Pauses and resumes the rotation of the dis-
play.
Setting button
Changes settings, such as the automati-
cally display cornering view, the vehicle
body color, the intuitive parking assist
detection distance. (
●
Pressing the VIEW switch again changes
the screen back to the previously dis-
played screen, such as the Multimedia
Display.
Checking around the vehicle
Screen display
A
B
C
D
A
B
C
D
310
4-5. Using the driving support systems
The wide front view & panoramic view screen provides support when checking the
areas in front of the vehicle and around the vehicle when taking-off at T-intersec-
tions or other intersections during poor visibility.
To display the screen, press the VIEW switch when the shift lever is in the N or D
position with the vehicle moving approximately 7 mph (12 km/h) or less.
This screen will be displayed if the intuitive parking assist detects an object in front
of your vehicle (intuitive parking assist linked display).
Distance guide lines
Shows distance in front of the vehicle.
• Display points approximately 3 ft. (1 m) from the edge of the bumper.
Intuitive parking assist
When a sensor detects a stationary object, the direction of and the approximate distance to
the stationary object are displayed and the buzzer sounds.
Estimated course lines
Shows an estimated course when the steering wheel is turned.
• This line will be displayed when the steering wheel is turned by 90° or more from the
center (straight-line) position.
Parking Support Brake
When the system determines that the possibility of a collision with detected target objects
is high, a warning message is displayed.
Display off button
Checking the front and around the vehicle
Screen display
A
B
C
D
E
311
4-5. Using the driving support systems
4
D
riv
ing
Changes the screen back to the previously displayed screen, such as the audio screen.
Display mode switching button
Switches display mode every time touch the button.
Guide line switching button
Select to change the guide line mode between the distance guide line mode and the esti-
mated course line mode. (
Automatic display button
Select to turn automatic display mode on/off. The indicator on the button illuminates during
automatic display mode. (
Setting button
Changes settings, such as the automatically display cornering view, the vehicle body color,
the intuitive parking assist detection distance. (
Intuitive parking assist mute button
This button temporarily mutes the intuitive parking assist sound.
■
Wide front view & panoramic view display
●
Pressing the VIEW switch changes the screen to the Side Clearance View & panoramic
view screen or previously displayed screen, such as the Multimedia Display.
●
For details about the intuitive parking assist (
P.261) and Parking Support Brake func-
tion. (
●
The display position of the intuitive parking assist and the position of target objects dis-
played in the camera image do not match.
Each time the guide line switching but-
ton is selected, the mode will change as
follows:
WARNING
■
Intuitive parking assist display
●
When a sensor indicator on the intuitive parking assist display illuminates in red or a
buzzer sounds continuously, be sure to check the area around the vehicle immediately
and do not proceed any further until safety has been ensured, otherwise an unex-
pected accident may occur.
●
As the intuitive parking assist display is displayed over the camera view, it may be diffi-
cult to see the intuitive parking assist display depending on the color and brightness of
the surrounding area.
F
G
H
I
J
Switching the guide line mode
312
4-5. Using the driving support systems
Distance guide line
Only the distance guide lines are
displayed.
Estimated course line
Estimated course lines will be added
to the distance guide lines.
In addition to screen switching by
operating the VIEW switch, automatic
display mode is available. In this mode,
the screen is switched automatically in
response to vehicle speed.
In automatic display mode, the monitor
will automatically display images in the
following situations:
When the shift lever is shifted to N
or D position.
When vehicle speed is reduced to
approximately 6 mph (10 km/h) or
less.
The Side Clearance View & panoramic view screen/Cornering View & pan-
oramic view screen provide support to check the areas around the sides of the
vehicle when driving on a narrow road.
To display the Side Clearance View & panoramic view screen, press the VIEW
switch repeatedly when the shift lever is in the N or D position with the vehicle
moving approximately 7 mph (12 km/h) or less.
The Cornering View & panoramic view screen will be displayed when the steering
wheel is turned by 180° or more from the center (straight-line) position when
automatic display mode of the Cornering View display is enabled. When the turn-
ing angle of the steering wheel becomes 90° or less from the center position, the
screen will return to the Side Clearance View & panoramic view screen.
Automatic display mode
Checking the sides of the vehicle
313
4-5. Using the driving support systems
4
D
riv
ing
Side Clearance View & panoramic view
Distance guide lines
Show distance in front of the vehicle.
• Display points approximately 3 ft. (1 m) from the edge of the bumper.
Vehicle width guide lines
Shows guide lines of the vehicle’s width including the outside rear view mirrors.
Front tire guide lines
Shows guide lines of where the front tire touches the ground.
Estimated course lines
Shows an estimated course when the steering wheel is turned.
• This line will be displayed when the steering wheel is turned by 90° or more from the
center (straight-line) position.
Guide line switching button
Select to change the guide line mode between the distance guide line mode and the esti-
mated course line mode. (
Display mode switching button
Switches display mode every time touch the button.
Automatic display button
Select to turn automatic display mode on/off. The indicator on the button illuminates during
automatic display mode. (
Intuitive parking assist
When a sensor detects a stationary object, the direction of and the approximate distance to
the stationary object are displayed and the buzzer sounds.
Screen display
A
B
C
D
E
F
G
H
314
4-5. Using the driving support systems
Parking Support Brake
When the system determines that the possibility of a collision with detected target objects
is high, a warning message is displayed.
Setting button
Changes settings, such as the automatically display cornering view, the vehicle body color,
the intuitive parking assist detection distance. (
Display off button
Changes the screen back to the previously displayed screen, such as the audio screen.
Intuitive parking assist mute button
This button temporarily mutes the intuitive parking assist sound.
Cornering View & panoramic view
Distance guide lines
Show distance in front of the vehicle.
• Display points approximately 3 ft. (1 m) from the edge of the bumper.
Vehicle width guide lines
Shows guide lines of the vehicle’s width including the outside rear view mirrors.
Front tire guide lines
Shows guide lines of where the front tire touches the ground.
Estimated course lines
Shows an estimated course when the steering wheel is turned.
• This line will be displayed when the steering wheel is turned by 90° or more from the
center (straight-line) position.
Intuitive parking assist
When a sensor detects a stationary object, the direction of and the approximate distance to
I
J
K
L
A
B
C
D
E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст