Lexus ES300 (1997 year). Manual — part 528
SF06F–01
S05035
New Gasket
S05052
Seal
Packing
Seal
Packing
Rubber
SF–46
–
SFI
ACOUSTIC CONTROL INDUCTION SYSTEM (ACIS)
897
1997 LEXUS ES300 (RM511U)
INSTALLATION
1.
INSTALL INTAKE AIR CONTROL VALVE
(a)
Install a new gasket to the air intake chamber.
(b)
Apply a light coat of engine oil to the rubber portions.
(c)
Apply seal packing to the positions of the intake air control
valve shown in the illustration.
Seal packing: Part No. 08826–00080 or equivalent
(d)
Install the intake air control valve, DLC1 bracket, ground
strap and cable with the 4 nuts.
Torque: 14.5 N·m (145 kgf·cm, 10 ft·lbf)
2.
CONNECT DLC1
3.
CONNECT ACTUATOR VACUUM HOSE
S05392
EFI Main
Relay
SF06G–01
S04947
Continuity
Ohmmeter
Ohmmeter
No Continuity
1
2
3
5
S04946
Battery
Ohmmeter
Continuity
1
2
3
5
–
SFI
EFI MAIN RELAY
SF–47
898
1997 LEXUS ES300 (RM511U)
EFI MAIN RELAY
INSPECTION
1.
REMOVE EFI MAIN RELAY (Marking: EFI)
2.
INSPECT EFI MAIN RELAY CONTINUITY
(a)
Using an ohmmeter, check that there is continuity be-
tween terminals 1 and 2.
If there is no continuity, replace the relay.
(b)
Check that there is no continuity between terminals 3 and
5.
If there is continuity, replace the relay.
3.
INSPECT EFI MAIN RELAY OPERATION
(a)
Apply battery voltage across terminals 1 and 2.
(b)
Using an ohmmeter, check that there is continuity be-
tween terminals 3 and 5.
If there is no continuity, replace the relay.
4.
REINSTALL EFI MAIN RELAY
S05389
Circuit Opening
Relay
SF06H–01
S04947
Continuity
Ohmmeter
Ohmmeter
No Continuity
1
2
3
5
S04946
Battery
Ohmmeter
Continuity
1
2
3
5
SF–48
–
SFI
CIRCUIT OPENING RELAY
899
1997 LEXUS ES300 (RM511U)
CIRCUIT OPENING RELAY
INSPECTION
1.
REMOVE CIRCUIT OPENING RELAY (Marking: CIR
OPN)
2.
INSPECT CIRCUIT OPENING RELAY CONTINUITY
(a)
Using an ohmmeter, check that there is continuity be-
tween terminals 1 and 2.
If there is no continuity, replace the relay.
(b)
Check that there is no continuity between terminals 3 and
5.
If there is continuity, replace the relay.
3.
INSPECT CIRCUIT OPENING RELAY OPERATION
(a)
Apply battery voltage across terminals 1 and 2.
(b)
Using an ohmmeter, check that there is continuity be-
tween terminals 3 and 5.
If there is no continuity, replace the relay.
4.
REINSTALL CIRCUIT OPENING RELAY
S05514
V–Bank Cover
Vacuum Hose
VSV for EGR
Emission Control Valve Set
VSV for EVAP Connector
VSV for EGR Connector
High–Tension Cord Cover
VSV for ACIS Connector
SF06I–01
–
SFI
VSV FOR EXHAUST GAS RECIRCULATION (EGR)
SF–49
900
1997 LEXUS ES300 (RM511U)
VSV FOR EXHAUST GAS RECIRCULATION (EGR)
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст