Lexus ES300 (1997 year). Manual — part 529
SF06J–02
S04514
Ohmmeter
Continuity
S04513
Ohmmeter
No Continuity
S04515
Air
E
G
S04512
Air
F
E
Battery
SF–50
–
SFI
VSV FOR EXHAUST GAS RECIRCULATION (EGR)
901
1997 LEXUS ES300 (RM511U)
INSPECTION
1.
REMOVE V–BANK COVER, EMISSION CONTROL
VALVE SET AND HIGH–TENSION CORD COVER
2.
REMOVE VSV
(a)
Disconnect the 3 vacuum hoses from the VSV.
(b)
Remove the screw and VSV.
3.
INSPECT VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance: 27 – 33
Ω
at 20
°
C (68
°
F)
If there is no continuity, replace the VSV.
4.
INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
If there is continuity, replace the VSV.
5.
INSPECT VSV OPERATION
(a)
Check that air flows from port E to port G.
(b)
Apply battery voltage across the terminals.
(c)
Check that air flows from port E to port F.
If operation is not as specified, replace the VSV.
6.
REINSTALL VSV
(a)
Install the VSV with the screw.
(b)
Connect the 3 vacuum hoses to the VSV.
7.
REINSTALL EMISSION CONTROL VALVE SET
8.
REINSTALL HIGH–TENSION CORD COVER
9.
REINSTALL V–BANK COVER
S05516
V–Bank Cover
EVAP Hose
VSV for EVAP
VSV for EVAP Connector
VSV for ACIS
Emission Control Valve Set
VSV for EGR Connector
High–Tension Cord Cover
VSV for ACIS Connector
SF06K–01
–
SFI
VSV FOR EVAPORATIVE EMISSION (EVAP)
SF–51
902
1997 LEXUS ES300 (RM511U)
VSV FOR EVAPORATIVE EMISSION (EVAP)
COMPONENTS
SF06L–06
S04522
Ohmmeter
Continuity
S04521
Ohmmeter
No Continuity
P18857
Air
F
E
S04520
Air
E
F
Battery
SF–52
–
SFI
VSV FOR EVAPORATIVE EMISSION (EVAP)
903
1997 LEXUS ES300 (RM511U)
INSPECTION
1.
REMOVE V–BANK COVER, EMISSION CONTROL
VALVE SET AND HIGH–TENSION CORD COVER
2.
REMOVE VSV
(a)
Disconnect the 2 EVAP hoses from the VSV.
(b)
Remove the screw and VSV.
3.
INSPECT VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance: 27 – 33
Ω
at 20
°
C (68
°
F)
If there is no continuity, replace the VSV.
4.
INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
If there is continuity, replace the VSV.
5.
INSPECT VSV OPERATION
(a)
Check that air flows with difficulty from port E to port F.
(b)
Apply battery voltage across the terminals.
(c)
Check that air flows from port E to port F.
If operation is not as specified, replace the VSV.
6.
REINSTALL VSV
(a)
Install the VSV with the screw.
(b)
Connect the 2 EVAP hoses to the VSV.
7.
REINSTALL EMISSION CONTROL VALVE SET
8.
REINSTALL HIGH–TENSION CORD COVER
9.
REINSTALL V–BANK COVER
S05515
V–Bank Cover
Emission Control Valve Set
High–Tension Cord Cover
VSV for EVAP Connector
VSV for EGR Connector
VSV for ACIS Connector
Vacuum Hose
VSV for ACIS
SF06M–01
–
SFI
VSV FOR ACOUSTIC CONTROL INDUCTION
SYSTEM (ACIS)
SF–53
904
1997 LEXUS ES300 (RM511U)
VSV FOR ACOUSTIC CONTROL INDUCTION SYSTEM (ACIS)
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст