Lexus ES300 (1997 year). Manual — part 24
94
BODY ELECTRICAL — LIGHTING
BODY ELECTRICAL
LIGHTING
DESCRIPTION
The new ES300 has the following systems:
System
Outline
Headlights
The new ES300 has newly adopted the 4-light multi-reflector type headlights.
For details, see the next page.
Automatic Light Control
System
Positioning the light control switch at AUTO turns the headlights and taillights
on or off, depending on the light availability surrounding the vehicle, as
detected by the automatic light control sensor. In the new model, automatic
light control relay is integrated with the automatic light control sensor.
The basic construction and operation are the same as in the ’95 LS400.
Daytime Running Light System
This system is designed to automatically activate the headlights during the
daytime to keep the car highly visible to other vehicles. As in the previous
model, the headlights are activated at a reduced level from the normal high
beam brightness.
Also, only the high beam headlight bulb is turned on as daytime running light.
The basic construction and operation are the same as in the previous model.
Auto Turn-Off Light System
When the ignition key is turned from ON to ACC or LOCK position and the
driver’s door is opened with the taillights and headlights turned on, this system
automatically turns them off.
The basic operation of this system is the same as in the previous model.
Illuminated Entry System
This system is useful when entering the vehicle, fastening the seat belts and
inserting the ignition key into the key cylinder in the dark.
As in the previous model, when any of the doors is opened, the illuminated
entry system turns on the illumination lights around the ignition key cylinder
and dome light (only when the control switch is at DOOR position)
simultaneously and fade out in about 15 seconds.
The basic operation of this system is the same as in the previous model.
95
BODY ELECTRICAL — LIGHTING
HEADLIGHTS
1. General
On the new ES300, the headlight construction has been changed from the 4-light projector type headlights
of the previous model to the 4-light multi-reflector type headlights.
2. Multi-Reflector Type Headlight
Conventional headlights accomplish the dispersion and distribution of the light that is emitted by the bulbs
through the lens cut pattern. However, with the multi-reflector type headlights, the light from the bulbs is
dispersed and distributed through multiple parabolic shaped reflectors. As a result, the lens cut pattern is no
longer provided in the center of the lens, thus realizing a clear look.
Light Distribution Diagram
96
BODY ELECTRICAL — AIR CONDITIONING
AIR CONDITIONING
DESCRIPTION
1. General
The air conditioning system in the new ES300 has the following features:
A fully automatic controlled type air conditioning system is used on all models.
The heater control panel is an easy-to-use dial and push button type panel.
As in the previous model, an air conditioning unit that incorporates a blower, heater and cooler unit, has
been adopted.
An aluminum heater core has been adopted on all models.
The defroster nozzle inner wall is modified into a radial configuration for smoother air flow.
A defroster-linked air conditioning startup control, which automatically engages the air conditioning
when the defroster mode has been selected, is provided.
As in the previous model, the self-diagnosis function has been adopted.
Performance
Model
New
Previous
Item
New
Previous
H t
Heat Output
W (Kcal/h)
5580 (4800)
←
Heater
Air Flow Volume
*
m
3
/h
360
380
Power Consumption
W
220
←
Ai
Heat Output
W (Kcal/h)
5350 (4600)
←
Air
Conditioning
Air Flow Volume
m
3
/h
530
←
Conditioning
Power Consumption
W
260
←
Defroster
Air Flow Volume
*
m
3
/h
360
←
*
:With Side Vent Closed
Specifications
Model
New
Previous
Item
New
Previous
Type
Dimpled Tube Type
←
n
and
Heater Core
Size
W x H x L mm (in.)
155.7 x 220 x 27
(6.1 x 8.7 x 1.1)
160 x 220 x 32
(6.3 x 8.7 x 1.3)
ation
r
Fin Pitch
mm (in.)
2.0 (0.08)
1.8 (0.07)
entil
a
eater Blower
Motor Type
S80Fs12.5T
S80Fs12T
Ve
n
He
Blower
Size
Dia. x H mm (in.)
150 x 75 (5.9 x 3.0)
←
Type
3–Passage Flow Type
←
g
Condenser
Size
W x H x L mm (in.)
415.6 x 726 x 22
(16.4 x 28.6 x 0.9)
435.2 x 686 x 22
(17.1 x 27.0 x 0.9)
o
ning
Fin Pitch
mm (in.)
4.5 (0.18)
3.5 (0.14)
d
itio
n
Type
Draw Cup Type
←
A
ir Con
d
Evaporator
Size
W x H x L mm (in.)
260 x 252 x 90
(10.2 x 9.9 x 3.5)
←
A
i
Fin Pitch
mm (in.)
4.0 (0.16)
←
Compressor
Type
10PA17C
←
Refrigerant
Type
HFC134a (R134a)
←
97
BODY ELECTRICAL — AIR CONDITIONING
2. Damper Position and Air Flow Relationship
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст