Lexus NX (2022 year). Manual in english — page 3
▶
Inside the vehicle
Driver's door:
Even if the door is locked, pressing the front side of the door opener switch
will open
the door.
The door will unlock and the door lock indicator will turn off.
Passenger doors:
Press the door lock switch to unlock the door, and then pressing the front side of the door
opener switch
to open the door.
The door will unlock and the door lock indicator will turn off.
INFORMATION
■
Inside door opener switch operating conditions
When any of the following conditions are met:
●
The vehicle speed is less than 4 km/h (2 mph) and the parking brake is engaged
●
The vehicle speed is less than 4 km/h (2 mph) and the brake pedal is depressed
●
The shift position is in P
■
When opening a door from inside the vehicle
Open the door pressing the door opener switch.
If the door is not fully unlatched, press the door opener switch twice to open the door.
■
Manual release handles inside the vehicle
The door opener switches inside the vehicle can also be used to manually open the
doors.
1-3. Entering/exiting the vehicle and loading luggage
55
1
Befor
e driving
A door can be opened through electronic operation by pressing a the door opener
switch, or it can be opened using the door opener switch as a manual release handle and
pulling it twice.
1-3. Entering/exiting the vehicle and loading luggage
56
Locking/unlocking the doors
INFORMATION
■
Impact detection door lock release system
If the vehicle is involved in a severe frontal or rear collision, manual release handle
operation will be enabled for all of the doors.
■
Operation signals
Unlocking is indicated by the emergency flashers flashing. (twice)
Locking is indicated by the emergency flashers flashing. (Once)
■
Security feature
If a door is not opened within approximately 30 seconds after the vehicle is unlocked, the
security feature automatically locks the vehicle again.
Using the smart entry & start system (vehicles with entry function)
Locking/unlocking the doors using smart entry & start system
The driver should always carry an electronic key (or the card key) on their person,
for example in their pocket.
1
Grip the door handle to unlock the doors.
Make sure to touch the sensor on the back
of the handle.
The doors cannot be unlocked for 3 sec-
onds after the doors are locked.
2
Touch the lock sensor (the indentation on
the surface of the door handle) to lock the
doors.
Check that the door is securely locked.
Locking the doors will set the alarm
system.
INFORMATION
■
When the door cannot be locked even though the lock sensor has been touched
with a finger
Touch the lock sensor with the palm of your hand.
*1 :
The door unlock settings can be changed.
* :
If equipped
1-3. Entering/exiting the vehicle and loading luggage
57
1
Befor
e driving
When gloves are being worn, remove the gloves.
Switching the door unlock function
It is possible to set which doors the entry function unlocks using the wireless
remote control.
1
Turn the engine switch off.
2
Cancel the intrusion sensor
and tilt sensor
of the alarm system to prevent
unintended triggering of the alarm while changing the settings.
3
When the indicator light on the key surface is not on, press and hold
or
for approximately 5 seconds while pressing and holding
.
The setting changes each time an operation is performed, as shown below. (When
changing the setting continuously, release the buttons, wait for at least 5 seconds, and
repeat step 3.)
Multi-information display/Beep
Unlocking function
Exterior: Beeps 3 times
Interior: Pings once
Holding the driver’s door handle unlocks
only the driver’s door.
Holding any of the passenger door han-
dles unlocks all the doors.
Exterior: Beeps twice
Interior: Pings once
Holding a door handle unlocks all the
doors.
To prevent unintended triggering of the alarm, unlock the doors using the wireless
remote control and open and close a door once after the settings have been changed.
* :
If equipped
1-3. Entering/exiting the vehicle and loading luggage
58
(If a door is not opened within 30 seconds after is
pressed, the doors will be
locked again and the alarm will automatically be set.)In a case that the alarm is trig-
gered, immediately stop the alarm.
Operations using the wireless remote control
Lock/unlock the doors using wireless remote control
1
Locks all the doors
Check that the door is securely locked.
2
Unlocks all the doors
Using the door lock switches
Locking/unlocking the doors with the door lock switches
1
Press the
switch.
All of the doors will lock.
The indicator
comes on.
2
Press the
switch.
All of the doors will unlock.
The indicator
turns off.
Close & lock (walk away)
When the power back door is open, all of the doors will be locked when the power
back door is closed.
INFORMATION
■
Close & lock (walk away) function operating conditions
This function can be operated when all of the following conditions are met:
●
An electronic key is not detected within the vehicle.
●
All of the doors other than the power back door are closed.
●
The brake pedal is not depressed.
* :
If equipped
1-3. Entering/exiting the vehicle and loading luggage
59
1
Befor
e driving
●
The engine switch is off.
■
Hands free close & lock (walk away) function
operating conditions
This function can be operated when all of the following conditions are met:
●
The hands free close & lock function setting is on.
●
The Hands Free Power Back Door operating conditions are met.
●
An electronic key is not detected within the vehicle.
●
All of the doors other than the power back door are closed.
●
The brake pedal is not depressed.
●
The engine switch is off.
■
Situations in which the close & lock (walk away) function may not operate properly
In the following situations, the close & lock function may not operate properly:
●
If the
switch on the lower part of the power back door is pressed by a hand which
is holding an electronic key
●
If the
switch on the lower part of the power back door is pressed when the
electronic key is in a bag, etc. that is placed on the ground
●
If the
switch on the lower part of the power back door is pressed with the
electronic key not near the vehicle
Closing the back door and lock all of the doors
1
Perform the following procedure with no electronic keys for this vehicle inside
the vehicle. When the power back door is closed, all of the doors will lock.
Using the switch:
2
While carrying an electronic key, press the
switch on the lower part of the
power back door.
When you move away from the power back door, it will automatically fully close.
1-3. Entering/exiting the vehicle and loading luggage
60
If the power back door is approached while carrying an electronic key, the closing
operation will stop.
A different buzzer than normal will sound. When the power back door is closed, door
lock operation signals will indicate that all of the doors have been locked.
Vehicles with Hands Free Power Back Door:
3
If the power back door is closed using a hands free power back door close
operation while carrying an electronic key, all of the doors will be locked at the
same time.
When you move away from the power back door, it will automatically fully close.
If the power back door is approached while carrying an electronic key, the closing
operation will stop.
A different buzzer than normal will sound. When the power back door is closed, door
lock operation signals will indicate that all of the doors have been locked.
WARNING
When closing the power back door using the close & lock function, a different
buzzer than the normal one will sound before the operation begins.
To check that the operation has started correctly, check that a different buzzer than
the normal one has sounded.
Additionally, when the power back door is fully closed and locked, operation signals
will indicate that all of the doors have been locked.
Before leaving the vehicle, make sure that the operational signals have operated and
that all of the doors are locked.
*2 :
This setting must be customized at any authorized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
1-3. Entering/exiting the vehicle and loading luggage
61
1
Befor
e driving
Theft deterrent system
This vehicle is equipped with an engine immobilizer system and alarm system to
help prevent vehicle theft.The engine immobilizer is a system which helps prevent
intrusion into the vehicle and starting of the engine using keys other than a key
registered to this vehicle. Through a transponder chip built into the keys, registered
keys can be recognized over unauthorized copies.The alarm uses light and sound
to give an alert when an intruder is detected.
INFORMATION
■
Note for the entry function
The engine immobilizer system is designed to help prevent vehicle theft but does not
guarantee absolute security against all vehicle thefts.
■
System maintenance
The engine immobilizer system and alarm system are maintenance-free.
■
Triggering of the alarm
The alarm may be triggered in the following situations:
●
The doors are unlocked using the mechanical key.
●
A person inside the vehicle opens a door or the hood, or unlocks the vehicle using the
lock lever on an inside door handle.
●
The battery is recharged or replaced when the vehicle is locked.
●
A locked door is unlocked or opened in any way other than using the entry function,
wireless remote control or mechanical key. (The doors will lock again automatically.)
●
The hood is opened from outside of the vehicle.
●
detects something moving inside the vehicle. (Example: an
intruder breaks a window and gets into the vehicle.)
●
The tilt sensor
detects a change of vehicle inclination.
■
Alarm-operated door lock function operating conditions
In the following cases, depending on the situation, the door may automatically lock to
prevent improper entry into the vehicle:
●
When a person remaining in the vehicle unlocks the door and the alarm is activated.
●
While the alarm is activated, a person remaining in the vehicle unlocks the door.
●
When recharging or replacing the battery.
* :
If equipped
1-3. Entering/exiting the vehicle and loading luggage
62
Enable the engine immobilizer system
NOTICE
Do not modify or remove the system. If modified or removed, the proper operation of the
system cannot be guaranteed.
Turn the engine switch off.
When the engine immobilizer system is enabled, the
security indicator flashes to indicate that the system is
operating.
Never leave the keys inside the vehicle when you
leave the vehicle.
INFORMATION
■
Cancel the engine immobilizer system
While carrying a key registered to the vehicle, change the engine switch to ACC or ON.
The engine immobilizer system will be cancelled and the security indicator will turn off.
Double locking system and its performance
The double locking system helps prevent intrusion into the vehicle by disabling
unlocking of the doors from inside and outside of the vehicle.
WARNING
Never activate the double locking system when there are people in the vehicle, because
all the doors cannot be opened from inside the vehicle.
Vehicles employing this system have labels on the
window glass of both front doors.
Setting the double locking system
Turn the engine switch off, have all the passengers exit the vehicle and ensure that
all the doors are closed.
1-3. Entering/exiting the vehicle and loading luggage
63
1
Befor
e driving
Using the entry function: Touch the sensor area on the outside door handle twice
within 5 seconds.
Using the wireless remote control: Press
twice within 5 seconds.
The double locking system will be set.
Canceling the double locking system
Using the entry function: Hold the outside door handle, press the power back door
switch or move your foot under the center of the rear bumper (vehicles with Hands
Free Power Back Door).
Using the wireless remote control: Press
.
Setting the alarm system
Make sure of the following before setting the alarm:
●
Nobody is in the vehicle.
●
The windows and moon roof are closed before the alarm is set.
●
No valuables or other personal items are left in the vehicle.
NOTICE
Do not modify or remove the system. If modified or removed, the proper operation of the
system cannot be guaranteed.
Close the doors and hood, and lock all the doors
using the entry function
or wireless remote con-
trol. The system will be set automatically after 30
seconds.
The indicator light changes from being on to flashing
when the system is set.
If all doors are closed with hood open, alarm system
can be set.
Canceling/stopping the alarm system
Do one of the following to deactivate or stop the alarms:
●
Unlock the doors using the entry function
or wireless remote control.
●
Start the engine.
The alarm will be deactivated or stopped after a few seconds.
* :
If equipped
1-3. Entering/exiting the vehicle and loading luggage
64
Intrusion sensor and tilt sensor
The intrusion sensor detects intruders or movement in the vehicle.The tilt sensor
detects changes in vehicle inclination, such as when the vehicle is towed away.This
system is designed to deter and prevent vehicle theft but does not guarantee
absolute security against all intrusions.
NOTICE
To ensure correct operation of the intrusion sensor, observe the following.
●
Do not spray air fresheners or other products
directly into the sensor holes.
●
Do not touch or cover the sensors.
●
Do not install accessories other than genuine Lexus parts or leaving objects between
the driver’s seat and front passenger’s seat. Otherwise, the detection performance
may reduce.
●
The intrusion sensor may be canceled when the electronic key is near the vehicle.
INFORMATION
■
Intrusion sensor detection considerations
The sensor may trigger the alarm in the following situations:
●
People or pets are in the vehicle.
●
A window or the moon roof is open. In this case, the sensor may detect the following:
•
Wind or the movement of objects such as leaves and insects inside the vehicle
•
Ultrasonic waves emitted from devices such as the intrusion sensors of other
vehicles
* :
If equipped
1-3. Entering/exiting the vehicle and loading luggage
65
1
Befor
e driving
•
The movement of people outside the vehicle
●
Small insects such as moths or flies are in the vehicle.
●
Unstable items, such as dangling accessories or clothes hanging on the coat hooks,
are in the vehicle.
●
The vehicle is parked in a place where extreme vibrations or noises occur, such as in a
parking garage.
●
Ice or snow is removed from the vehicle, causing the vehicle to receive repeated
impacts or vibrations.
●
The vehicle is inside an automatic or high-pressure car wash.
●
The vehicle experiences impacts, such as hail, lightning strikes, and other kinds of
repeated impacts or vibrations.
■
Tilt sensor detection considerations
The sensor may trigger the alarm in the following situations:
●
The vehicle is transported by a ferry, trailer, train, etc.
●
The vehicle is parked in a parking garage.
●
The vehicle is inside a car wash that moves the vehicle.
●
Any of the tires loses air pressure.
●
The vehicle is jacked up.
●
An earthquake occurs or the road caves in.
●
Cargo is loaded onto or unloaded from the roof luggage carrier.
Related Links
Set the intrusion sensor and tilt sensor
The intrusion sensor and tilt sensor will be set automatically when the alarm is set.
Cancel the intrusion sensor and tilt sensor
If you are leaving pets or other moving things inside the vehicle, make sure to
disable the intrusion sensor and tilt sensor before setting the alarm, as they will
respond to movement inside the vehicle.
The alarm will still be set even when the intrusion sensor and tilt sensor are
canceled.
1
Touch the Shortcut screen switch.
2
Touch the
.
1-3. Entering/exiting the vehicle and loading luggage
66
Operation of the intrusion sensor and tilt sensor will be canceled, and a message will
be displayed on the multi-information display in the instrument cluster.
Touch the switch again to set the intrusion / tilt sensor again.
A message will be shown on the multi-information display in the instrument cluster.
INFORMATION
■
Automatic re-enabling of the intrusion sensor and tilt sensor
●
After the intrusion sensor and tilt sensor are canceled, unlocking the doors using
the entry function or wireless remote control will re-enable the intrusion sensor
and tilt sensor.
●
The intrusion sensor and tilt sensor will automatically be re-enabled when the
alarm system is reactivated.
1-3. Entering/exiting the vehicle and loading luggage
67
1
Befor
e driving
Loading the vehicle with luggage
Precautions for loading luggage into the luggage compartment
WARNING
■
Storage precautions
Observe the following precautions.
Failure to do so may prevent the pedals from being depressed properly, may block the
driver’s vision, or may result in items hitting the driver or passengers, possibly causing an
accident.
●
The following things may cause a fire if loaded in the luggage compartment:
•
Receptacles containing gasoline
•
Aerosol cans
●
Stow cargo and luggage in the luggage compartment whenever possible.
●
Do not stack cargo and luggage in the luggage compartment higher than the seat-
backs.
●
When you fold down the rear seats, long items should not be placed directly behind
the front seats.
●
Never allow anyone to ride in the luggage compartment.
It is not designed for passengers.
They should ride in their seats with their seat belts properly fastened.
●
Do not place cargo or luggage in or on the following locations.
•
At the feet of the driver
•
On the front passenger or rear seats (when stacking items)
•
On the luggage cover
•
On the instrument panel
•
On the dashboard
●
Secure all items in the occupant compartment.
■
Precautions for luggage weight and distribution
●
Do not overload your vehicle.
●
Load the vehicle as evenly as possible.
If the vehicle is loaded unevenly, the load on each tire will differ. This will lead to a
decrease in handling ability and brake performance, possibly leading to an accident.
1-3. Entering/exiting the vehicle and loading luggage
68
WARNING
■
When using a roof luggage carrier (vehicles with roof rails)
Observe the following precautions:
●
Place the cargo so that its weight is distributed evenly between the front and rear
axles.
●
If loading long or wide cargo, never exceed the vehicle overall length or width.
●
Before driving, make sure the cargo is securely fastened on the roof luggage carrier.
●
Loading cargo on the roof luggage carrier will make the center of gravity of the
vehicle higher.
Avoid high speeds, sudden starts, sharp turns, sudden braking, or abrupt maneuvers.
The vehicle may not be able to be controlled correctly and may rollover.
●
If driving for a long distance, on rough roads, or at high speeds, stop the vehicle now
and then during the trip to make sure the cargo remains in its place.
●
Do not exceed 80 kg (176.3 lb.) cargo weight on the roof luggage carrier.
NOTICE
Do not set luggage on the moon roof and panoramic roof. Failure to observe so may lead
to cause damage.
Back door functions and operation
The back door can be locked/unlocked and opened/closed by the following
procedures.
WARNING
■
Before driving the vehicle
Observe the following precautions.
Before driving the vehicle, make sure that the back door is fully closed. If the back door is
not fully closed, it may open unexpectedly while driving, causing an accident.
■
Caution while driving
●
Keep the back door closed while driving.
If the back door is left open, it may hit nearby objects while driving or luggage may be
unexpectedly thrown out, causing an accident.
In addition, exhaust gases may enter the vehicle, causing death or a serious health
hazard. Make sure to close the back door before driving.
●
Never let anyone sit in the luggage compartment.
1-3. Entering/exiting the vehicle and loading luggage
69
1
Befor
e driving
WARNING
In the event of sudden braking, sudden swerving or a collision, they are susceptible to
death or serious injury.
■
When children are in the vehicle
Observe the following precautions.
●
Do not allow children to play in the luggage compartment.
If a child is accidentally locked in the luggage compartment, they could have heat
exhaustion or other injuries.
●
Do not allow a child to open or close the back door.
Doing so may cause the back door to move unexpectedly, or cause the child’s hands,
arms, head, or neck to be caught by the closing back door.
■
Operating the back door
Observe the following precautions.
●
Remove any heavy loads, such as snow and ice, from the back door before opening it.
Failure to do so may cause the back door to suddenly shut again after it is opened.
●
When opening or closing the back door, thoroughly check to make sure the surround-
ing area is safe.
●
If anyone is in the vicinity, make sure they are safe and let them know that the back
door is about to open or close.
●
Use caution when opening or closing the back door in windy weather as it may move
abruptly in strong wind.
●
Vehicles without power back door: The back door may suddenly shut if it is not
opened fully. It is more difficult to open or close the back door on an incline than
on a level surface, so beware of the back door unexpectedly opening or closing by
itself. Make sure that the back door is fully open and secure before using the luggage
compartment.
●
Vehicles with power back door: The back door may suddenly shut if it is not opened
fully. It is more difficult to open or close the back door on an incline than on a
level surface, so beware of the back door unexpectedly opening or closing by itself.
Make sure that the back door is fully open and secure before using the luggage
compartment.
●
When closing the back door, take extra care to prevent your fingers, etc., from being
caught.
●
When closing the back door, make sure to press it lightly on its outer surface. If the
back door handle is used to fully close the back door, it may result in hands or arms
being caught.
1-3. Entering/exiting the vehicle and loading luggage
70
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст