Lexus SC300 / Lexus SC400. Manual — part 108
Rear Seat Belt
REMOVAL OF REAR SEAT BELT
(See page
1.
REMOVE REAR SEAT BACK AND CUSHION
2. REMOVE
PACKAGE
TRAY
TRIM
(a) Using a clip remover, remove two clips.
(b) Pull the belt guide forward to remove it.
(c) Pull the trim forward to remove it.
3.
REMOVE REAR SEAT OUTER BELT
(a) Remove the outer belt floor anchor bolt.
(b) Remove the bolt and the retractor.
4.
REMOVE REAR SEAT INNER BELT
INSTALLATION OF REAR SEAT BELT
(See page
1.
INSTALL REAR SEAT INNER BELT
Torque:
43 N
⋅
m (440 kgf
⋅
cm, 32 ft
⋅
lbf)
2.
INSTALL REAR SEAT OUTER BELT
Torque:
Retractor bolt
43 N
⋅
m (440 kgf
⋅
cm, 32 ft
⋅
lbf)
Anchor bolt
43 N
⋅
m (440 kgf
⋅
cm, 32 ft
⋅
lbf)
3. INSTALL
PACKAGE
TRAY
TRIM
4.
INSTALL REAR SEAT BACK AND CUSHION
(See step 1 to 2 on page
HINT:
After installation, check that the seat belts are posi-
tioned as shown.
INSPECTION OF REAR SEAT BELT
Emergency Locking Retractor (ELR)
1.
RUNNING TEST (IN SAFE AREA)
(See step 1 on page
2.
STATIC TEST
(See step 2 on page
–
BODY
Seat Belt (Rear Seat Belt)
BO–73
LUGGAGE COMPARTMENT
Fitting Adjustments
HINT:
Adjust the door panel according to the following
method.
1.
ADJUST LUGGAGE COMPARTMENT
(a) For forward/rearward and vertical direction adjustments
loosen the bolts.
(b) For left and right adjustment of front end of the door,
increase or decrease the number of washers between
the hinge and the door.
2.
ADJUST LOCK STRIKER
(a) Remove the trim rear cover.
(b) Using a hammer and brass bar, tap the door lock to
adjust it.
BO–74
–
BODY
Luggage Compartment (Fitting Adjustments)
Luggage Compartment Door
COMPONENTS
–
BODY
Luggage Compartment (Luggage Compartment Door)
BO–75
COMPONENTS (Cont’d)
REMOVAL OF LUGGAGE
COMPARTMENT DOOR
1.
REMOVE FOLLOWING PARTS:
(See steps 1 to 7 on pages
(a) Floor
mat
(b) Door striker cover
(c) Trim rear cover
(d) RH and LH side covers
(e) Trim front cover
(f) Door
trim
2.
REMOVE LUGGAGE COMPARTMENT DOOR
Remove four bolts and the door.
REPLACEMENT OF LUGGAGE
COMPARTMENT DOOR HINGE
(See page
1.
REMOVE FOLLOWING PARTS:
(a) Rear seat cushion and back (See steps 1 to 2 on page
(b) Roof side inner garnish (See step 8 on page
)
(c) Package tray trim (See step 9 on page
2.
REMOVE LUGGAGE COMPARTMENT DOOR HINGE
(a) Remove the hinge pin.
BO–76
–
BODY
Luggage Compartment (Luggage Compartment Door)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст