Mercedes-Benz ML320. Manual — part 737
Fig. 63: Identifying Assembly Wedge (110 589 03 59 00)
REMOVE/INSTALL DOOR SILL MOLDING - AR68.30-P-4100GI
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175
Door sill molding in cargo space
2
molding (1)
3
Remove cap (4) on B-pillar
4
Unscrew screws (3) from B-
pillar
5.1
Remove rear pin from door sill
molding (1)
Up to 08/99.
6
Pull out the door sill molding
(1) on the C-pillar paneling
forwards
Danger of breaking!
Installation: Use an assembly wedge to lift up the C-
pillar paneling and door seal until the door sill molding
can be inserted without any problems.
Assembly wedge
Fig.
57
7
Install in the reverse order
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Fig. 64: Identifying Caps And Door Sill Molding
PREPARE HEADLINER FOR INSTALLING HANDLES - AR68.30-P-4300-01GH
Models 163.113/136/154/172 up to 31.8.01
When aligning the template, ensure that the arrow is pointing in direction of travel and the correct template
is used for each side.
1. Align template at cutouts provided.
2. Mark cutouts for grab handles.
3. Cut out cutouts for grab handles.
Remove/install
1
Remove cover caps (1)
Do not scratch door sill molding.
2
Remove screws below caps
3
Remove door sill molding (2)
Installation: Ensure that sealing rubber is
positioned correctly.
4.1
Disconnect connector from electronic
compass
Only as of 01.09.00 and with code (245), trip
computer.
5
Install in the reverse order
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Fig. 65: Identifying Handle Template
REMOVE AND INSTALL HEADLINER - AR68.30-P-4300GH
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Fig. 66: Identifying Headliner Components
Remove/install
1
Remove headrest
See owner's manual
2
Remove inside rearview
mirror (13)
To vehicle identification number A145272,
X708318.
AR68.40-P-
0001GH
As of vehicle identification number A145273,
X708319.
AR68.40-P-
0001GI
3
Remove front overhead
control panel (1)
AR82.20-P-
1100GH
4
Remove front roof frame
handles (2)
Up to 31.08.01: Open covers for handles, press
clip for handle down on each side, simultaneously
press handle upward and pull out.
As of 01.09.01: Open cover and unscrew screws.
Up to 31.08.01: With integral rear dome lamp.
Open covers for handles, press clip for handle down
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст