Mercedes-Benz ML320. Manual — part 371
AF72.10-P-6003-01A
Adjusting front door lock
Front door
Number
Designation
Model 163
BA72.10-P-1004-01D
Screw on door lock
Nm
8
P72.10-2031-11
1
Remove plug for adjustment screw on front door lock
2
Press door handle inward and remove adjustment screw (1) on
door lock. Do not remove tool.
Note that door lock in right front door has left-hand thread.
P72.10-2032-01
3
Pull door handle outward approx. 1 mm and hold in this position
4
Press adjustment screw in direction of door inner paneling with attached tool and tighten
5
Release door handle
6
Observe motion of adjustment screw through access hole while pulling door handle outward
Door handle should have 1-2 mm of play (a) before the adjustment screw moves.
P72.10-2033-01
The lock opens when the door handle is pulled out approx. 15 mm (b).
7
Reinstall plug for adjustment screw on door lock
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR72.10-P-4011GH
Removing and installing front door lock
13.2.97
MODEL
163
P72.10-0487-06
1
Guide rail
2
Door lock
3
Screws
4
Control cable
5
Connector
M14/5
Right front door central locking
motor (not illustrated)
M14/6
Left front door central locking
motor (not illustrated)
Operation no. of operation texts or of standard texts and flat rates
Division
Operation
no.
Operation text
P
724290
REPLACING LOCK ON LEFT FRONT DOOR
P
724300
REPLACING LOCK ON RIGHT FRONT DOOR
Removal, installation
1
Remove door liner on front door
AR72.10-P-1000GH
2
Remove outer door handle on front door
AR72.10-P-2400GH
3
Remove bearing bracket for door handle
4
Pull door foil off of inner door panel
Installation: Replace damaged foil
5
Remove window lift mechanism
guide rail (1)
6
Unscrew screws (3)
*BA72.10-P-1004-01D
7
Disconnect connector (5) on central locking
motor (M14/5 or M14/6)
8
Remove door lock (2)
Remove door lock (2) downward through
installation opening
9
Unhook control cable (4)
10
Install in opposite order
Front door
Number
Designation
Model 163
BA72.10-P-1004-01D
Screw on door lock
Nm
8
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
SI72.10-P-0001A
Service Information on adjusting front door lock
19.6.98
MODEL
163
Repairs concerning complaints about the front door not being
able to be opened after unlocking the vehicle, should be addressed in
the following manner:
1.
Adjust the door lock
2.
If attempt to adjust door lock was unsuccessful, replace door
lock.
The majority of door locks being returned under warranty for this
complaint have been found to be servicable after adjustment.
1
Adjust front door lock
If adjustment unsuccessful
#
AF72.10-P-6003-01A
Replace front door lock
AR72.10-P-4011GH
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
SI72.10-P-0002GH
Service Information: Modification of the front door
6.5.03
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
P72.10-2740-06
1
Side airbag
2
Attachment hole
3
Locating hole
4
Locating pin
Due to a design modification to the door skin, both parts must be
checked when exchanging the door or the sidebag.
1
Check the replacement door to see if the
aligning bore for the sidebag is present
Should the replacement door not have an
aligning bore and the sidebag is equipped
with a fixing pin:
#
Modify the front door
SM72.10-P-0004A
2
Check to see of the fixing pin is present for
the replacement sidebag
If there is no fixing pin present on the
sidebag, the door does not need to be
modified.
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст