Mercedes-Benz ML320. Manual — part 591
Unpin female contacts from plug (LSK)
1. Insert blade holder with clamping pliers
and LSK 8 blade
from front end through the openings in
plug contact cavity (1).
This step compresses the spring tabs (2) on the contact pin.
2. Now the pull line extending from contact-pin slightly to remove it from the back of the plug.
Fig. 554: Female Contact From Plug (LSK)
REMOVE CONTACTS FROM MAXI POWER TIMER COUPLING - AR00.19-P-0120-14A
Fig. 555: Identifying Wiring Harness Repair Kit, Supplement For Passenger Cars (220 589 04 99 00)
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Fig. 556: Identifying Wiring Harness Repair Kit, Basic (000 589 13 99 00)
Fig. 557: Identifying Wiring Harness Repair Kit (220 589 02 99 00)
Fig. 558: Identifying Blade Holder With Clamping Pliers (220 589 01 99 50)
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Fig. 559: Identifying MPT Blade (220 589 01 99 51)
Secondary release on version with retaining cap (MPT)
1. Using a suitable tool, pry up the lock tabs on the retaining cap (1).
2. Pull the retaining cap from the clutch housing (2).
Shown on a 4-pin MPT and JPT coupling
Fig. 560: Pulling Retaining Cap From Clutch Housing - Shown On A 4-Pin MPT And JPT Coupling
Unpin female contacts from coupling (MPT)
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
1. Insert blade holder with clamping pliers
and MPT blade
from front end through the openings in
coupling contact cavity (1).
This step compresses the spring shackles (2) on the female contact.
2. A slight tug on the corresponding cable will remove the female contact (1) from the coupling.
Fig. 561: Female Contacts From Coupling (MPT)
REMOVE CONTACTS FROM 2.5 ROUND PLUG CONTACT COUPLING - AR00.19-P-0120-15A
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст