Mercedes-Benz ML320. Manual — part 374
AR72.10-P-2400GH
Removing and installing outer door handle on front door
12.2.97
MODEL 163
P72.10-0488-06
1
Handle
2
Lock cylinder guide
3
Rotating rod
4
Base
5
Base
6
Screw
7
Retaining strap
8
Bearing bracket
9
Screw
10
Screw opening
Operation no. of operation texts or of standard texts and flat rates
Division
Operation
no.
Operation text
P
727240
REPLACING OUTER DOOR HANDLE ON LEFT FRONT DOOR
P
727241
REPLACING OUTER DOOR HANDLE ON LEFT FRONT DOOR, WITHOUT BEARING BRACKET
P
727242
REPLACING OUTER DOOR HANDLE ON LEFT FRONT DOOR, WITH BEARING BRACKET
P
727243
REPLACING OUTER DOOR HANDLE ON LEFT FRONT DOOR (INCLUDING TRANSFERING LOCKING CYLINDER)
P
727265
REPLACING OUTER DOOR HANDLE ON RIGHT FRONT DOOR
P
727266
REPLACING OUTER DOOR HANDLE ON RIGHT FRONT DOOR, WITHOUT BEARING BRACKET
P
727267
REPLACING OUTER DOOR HANDLE ON RIGHT FRONT DOOR, WITH BEARING BRACKET
P
727268
REPLACING OUTER DOOR HANDLE ON RIGHT FRONT DOOR (INCLUDING TRANSFERING LOCKING CYLINDER)
Removal, installation
1
Loosen screw (6)
Accessible through opening (10) on inner
side of door, loosen screw (6) max. 5 turns
*BA72.10-P-1003-01D
2
Pull off cylinder guide (2) outward to remove
Installation: Insert rotary rod (3) into door
lock actuating mechanism
3
Pull handle (1) toward rear together with base
(4) out of bearing bracket (8)
4
Remove base (5)
Installation: Insert base (5) into bearing
bracket (8)
5.1
Remove bearing bracket (8)
Only if bearing bracket is defective. The
bearing bracket (8) can only be removed
through the installation opening in the inner
door panel. For this purpose
#
Remove door liner on front door
AR72.10-P-1000GH
6
Install in opposite order
7
Adjust clearance between handle (1) and
actuating lever on door lock with eccentric
adjustment screw
Eccentric adjustment screw:
Accessible through opening on end of door.
Use Phillips screwdriver
8
Check for proper function
Front door
Copyright DaimlerChrysler AG 03.09.2005 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Number
Designation
Model 163
BA72.10-P-1003-01D
Screw for door handle
Nm
3
Copyright DaimlerChrysler AG 03.09.2005 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 2
This document was created with Win2PDF available at
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
AR68.30-P-4100GI
Remove/install door sill molding
20.4.01
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
Door sill molding in cargo space
P68.30-2393-11
1
Caps
2
Door sill molding
Remove/install
1
Remove cover caps (1)
Do not scratch door sill molding.
2
Remove screws below caps
3
Remove door sill molding (2)
Installation: Ensure that sealing rubber is
positioned correctly.
4.1
Disconnect connector from electronic compass
Only as of 01.09.00 and with code (245),
trip computer.
5
Install in the reverse order
Copyright DaimlerChrysler AG 28.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст